Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

A simple and efficient method for solvent-free iodination of hydroxylated aromatic aldehydes and ketones using iodine and iodic acid by grinding method

<正>Green,mild and efficient iodination of hydroxylated aromatic aldehydes and ketones using iodine and iodic acid in the solidstate by grinding under solvent-free conditions at room temperature.This method provides several advantages such as environmentally friendly,short reaction times,high yields,non-hazardous and simple work-up procedure.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Insights into the Mechanism and Catalysis of Oxime Coupling Chemistry at Physiological pH

The dynamic covalent‐coupling reaction involving α‐effect nucleophiles has revolutionized bioconjugation approaches, due to its ease and high efficiency. Key to its success is the discovery of aniline as a nucleophilic catalyst, which made this reaction feasible under physiological conditions. Aniline however, is not so effective for keto substrates. Here, we investigate the mechanism of aniline activation in the oxime reaction with aldehyde and keto substrates. We also present carboxylates as activating agents that can promote the oxime reaction with both aldehyde and keto substrates at physiological pH. This rate enhancement circumvents the influence of α‐effect by forming H‐bonds with the rate‐limiting intermediate, which drives the reaction to completion. The combination of aniline and carboxylates had a synergistic effect, resulting in a ～14–31‐fold increase in reaction rate at pD 7.4 with keto substrates. The biocompatibility and efficiency of carboxylate as an activating agent is demonstrated by performing cell‐surface oxime labeling at physiological pH using acetate, which showed promising results that were comparable with aniline.     

Silica xerogel films hybridized with carbon nanotubes by single step sol–gel processing

Synthesis of multi-walled carbon nanotubes (MWCNTs) doped silica xerogel films was reported in this work. A crucial step of introducing MWCNTs was achieved by functionalizing them by acid treatment to form stable and homogenous SiO₂/MWCNTs sol. Scanning electron microscopy showed spherical particles in honeycomb network structure for undoped xerogel films whereas dispersion and wrapping of MWCNTs in silica matrix was observed for MWCNTs doped films. Various bond formations during the sol–gel process and surface modification were confirmed using Fourier transform infra-red and detailed study on the chemical bonding state of the films was carried out using X-ray photoelectron spectroscopy. Nanoindentation studies showed that the mechanical properties of MWCNTs doped xerogel film increase dramatically: higher modulus (E = 2.127 ± 0.095 GPa) and hardness (H = 0.035 ± 0.017 GPa) values than those of pristine xerogel film (E = 0.234 ± 0.058 GPa, H = 0.01 ± 0.003 GPa).     

Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-Ox catalysts

Alkaline earth metal (Mg, Ca, Sr and Ba)-doped Mo-V-Sb-Ox catalysts, prepared by a dry-up method, have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions. The catalysts have been characterized by N2 adsorption-desorption, temperature-programmed desorption (TPD) of NH3, SEM and XRD. Influence of water vapor on the catalytic performance, particularly on the selectivities to acetic acid and acrylic acid, has also been studied. The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-Ox catalysts. The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals, which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid. The catalytic activity and product selectivities were found to be influenced by the reaction temperature, C3H8/O2 ratio and space velocity. A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Magnetization curves for general cylindrical samples in a transverse field

Using the recent results for the surface current density on cylindrical surfaces of arbitrary cross-section producing uniform interior magnetic field we propose a method for obtaining solutions of Bean’s critical state model for general cylindrical samples. The method uses the technique of conformal mapping to express the sample surface and the flux-fronts in terms of a set of coefficients that depend on a parameter. The flux-fronts are to be determined by solving a system of nonlinear ordinary differential equations for the coefficients. Retaining only a certain finite number of leading coefficients we get an approximate solution. The procedure is illustrated by considering two cyclindrical samples — one with an elliptical cross-section and the other with a non-elliptical cross-section. The virgin curve and small and large magnetization hysteresis loops for the two samples are obtained.     

Development and validation of an RP‐HPLC method for the quantitation of odanacatib in rat and human plasma and its application to a pharmacokinetic study

A simple, specific, sensitive and reproducible high‐performance liquid chromatography (HPLC) assay method has been developed and validated for the estimation of odanacatib in rat and human plasma. The bioanalytical procedure involves extraction of odanacatib and itraconazole (internal standard, IS) from a 200 μL plasma aliquot with simple liquid–liquid extraction process. Chromatographic separation was achieved on a Symmetry Shield RP₁₈ using an isocratic mobile phase at a flow rate of 0.7 mL/min. The UV detection wave length was 268 nm. Odanacatib and IS eluted at 5.5 and 8.6 min, respectively with a total run time of 10 min. Method validation was performed as per US Food and Drug Administration guidelines and the results met the acceptance criteria. The calibration curve was linear over a concentration range of 50.9–2037 ng/mL (r² = 0.994). The intra‐ and inter‐day precisions were in the range of 2.06–5.11 and 5.84–13.1%, respectively, in rat plasma and 2.38–7.90 and 6.39–10.2%, respectively, in human plasma. The validated HPLC method was successfully applied to a pharmacokinetic study in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Pseudo‐homogeneous kinetic model for esterification of acetic acid with propanol isomers over dodecatungstophosphoric acid supported on montmorillonite k10

Esterification of acetic acid with propanol isomers such as isopropanol and n‐propanol was carried out over dodecatungstophosphoric acid (DTPA), dodecamolybdophosphoric acid ammonium salt hydrate, and sodium tungstate hydrated purified supported on montmorillonite K10, which were characterized by powder X‐ray diffraction, Brunauer–Emmett–Teller, and temperature programmed ammonia desorption. A pseudo‐homogeneous (P‐H) kinetic model was established for esterification of acetic acid with propanol isomers over DTPA supported on montmorillonite K10. Effects of various parameters such as reaction time, speed of agitation, particle size, temperature, percent catalyst loading, molar ratio and mixture of propanol isomer were investigated in detail. The 20% (w/w) DTPA/K10 was found to be an optimum solid catalyst with 82% n‐propanol and 53% isopropanol conversion with 100% selectivity toward propyl acetate. The 20% (w/w) DTPA/K10 catalyst was found to be reusable for three cycles. The reaction follows second‐order kinetics with activation energies of 25.53 kJ mol^?1 and 28.15 kJ mol^?1 for isopropanol and n‐propanol, respectively. Pseudo‐homogeneous kinetic model fitted with R² value of trend line 0.999. This implies that esterification reaction is kinetically controlled owing to high activation energy. Copyright © 2013 John Wiley & Sons, Ltd.