Rh(I)/Sc(OTf)3-co-catalyzed Michael addition of ammonium ylide to (E)-1,4-enediones: synthesis of functionalized 1,4-diketones

Molecular Diversity - A Rh(I)/Sc(III) co-catalyzed synthesis of highly valuable functionalized 1,4-diketone derivatives in good yields and with an excellent diastereoselectivity. The established...     

A rapid and effective method for silver staining of PCR products separated in polyacrylamide gels

With the development of molecular quantitative genetics, particularly, genetic linkage map construction, quantitative trait loci mapping or genes fine mapping and association analysis etc., more and more PCR products separated in polyacrylamide gels need to be silver‐stained. However, conventional silver‐staining procedures are complicated and time‐consuming as they require a lot of preparation and handling of several solutions prior to use. In this study, a simple and rapid protocol for silver staining of PCR products was developed. The number of steps was reduced compared to conventional protocols, thus achieving detection of PCR products in 7 min, saving time and resources. Fixation and staining solution and developing solution in present staining procedure allowed a reutilization for 12 and 8 times, respectively, reducing the cost greatly. Meanwhile, the sensitivity was significantly improved with the improved method and the minimum of 0.097 ng/μL of DNA amount can be detected in denaturing polyacrylamide gel. The protocol developed in this study will facilitate the development of molecular quantitative genetics.     

肝素非还原端饱和结构的紫外吸收研究及在肝素寡糖测序中的应用

为了进一步探讨非还原端饱和结构的肝素寡糖在UV 232 nm的吸收情况, 制备了4种饱和结构的肝素二糖, 并用离子对反相液相色谱/离子阱飞行时间质谱(RPIP-LC/MS-IT-TOF)光电二极管阵列检测器分析了它们在UV 232 nm的吸收情况. 分析结果表明, 饱和结构的肝素二糖在UV 232 nm的检出限为9 μg(S/N=10), UV 232 nm/UV 206 nm约为不饱和结构肝素二糖UV 232 nm的7%~40%. 结果还表明, 肝素二糖UV 232 nm的吸收强度受亚硫酸基团(SO₃^2?)影响较大. 另外, 通过比较不饱和结构的肝素/硫酸类肝素(Hep/HS)标样二糖发现, 含N-未取代葡萄糖胺(GlcNH₃⁺)基团的二糖在UV 232 nm的吸收值较低. 最后, 通过简单的UV检测方法, 结合 HNO₂(pH=4.0)裂解法和RPIP-LC/MS-IT-TOF分析, 简化了含GlcNH₃⁺肝素六糖的测序方法. 本研究为以后用 HNO₂(pH=1.5)裂解法对混合组分N-硫酸化的肝素寡糖结构序列分析提供了可能.     

A filter‐based,mass‐conserving lattice Boltzmann method for immiscible multiphase flows

Some issues of He–Chen–Zhang lattice Boltzmann equation (LBE) method (referred as HCZ model) (J. Comput. Physics 1999; 152 :642–663) for immiscible multiphase flows with large density ratio are assessed in this paper. An extended HCZ model with a filter technique and mass correction procedure is proposed based on HCZ's LBE multiphase model. The original HCZ model is capable of maintaining a thin interface but is prone to generating unphysical oscillations in surface tension and index function at moderate values of density ratio. With a filtering technique, the monotonic variation of the index function across the interface is maintained with larger density ratio. Kim's surface tension formulation for diffuse–interface method (J. Comput. Physics 2005; 204 :784–804) is then used to remove unphysical oscillation in the surface tension. Furthermore, as the density ratio increases, the effect of velocity divergence term neglected in the original HCZ model causes significant unphysical mass sources near the interface. By keeping the velocity divergence term, the unphysical mass sources near the interface can be removed with large density ratio. The long‐time accumulation of the modeling and/or numerical errors in the HCZ model also results in the error of mass conservation of each dispersed phase. A mass correction procedure is devised to improve the performance of the method in this regard. For flows over a stationary and a rising bubble, and capillary waves with density ratio up to 100, the present approach yields solutions with interface thickness of about five to six lattices and no long‐time diffusion, significantly advancing the performance of the LBE method for multiphase flow simulations. Copyright © 2010 John Wiley & Sons, Ltd.     

矩形多环芳烃的合成

本文用3,4-二苯基-2,5-二(3,5-二溴苯基)环戊二烯酮(4a)与二苯乙炔(5a)通过Diels-Alder环加成反应得到1,2,4,5-四苯基-3,6-二(3,5-二溴苯基)苯(6a)。化合物6a通过经典的Suzuki偶联反应得到1,2,4,5-四苯基-3,6-二(3,5-二(4-十二烷基噻吩))苯基苯(8a),再利用Fe Cl3作为氧化剂发生Scholl氧化脱氢关环反应,得到目标化合物1a。采用类似合成方法,得到目标化合物1b。化合物的结构均通过1H NMR和MALDI-TOF MS表征,并对其光谱特征、热性能及电学性能进行了初步研究。     

Synthesis of phenothiazine‐based electroluminescent polymers with a stable emission property

Two phenothiazine‐based polymers were synthesized by the Heck reaction of 3,7‐divinyl‐N‐octyl‐phenothiazine with 3,7‐diiodo‐N‐octyl‐phenothiazine and 5,8‐dibromo‐2,3‐diethylquinoxaline. The polymers were characterized by the measurements of ¹H‐NMR, IR, TG, GPC, CV, UV–Vis, and FL. The results indicated that the introduction of quinoxaline group makes the absorption, PL, and EL emission maxima red‐shifted. The EL emission maximum and the CIE 1931 coordinate value are stabilized at a constant value with the increase in operating voltages. Therefore, the polymers have a stable electroluminescent emission property. Copyright © 2008 John Wiley & Sons, Ltd.     

Electromechanical coupling dynamics of TBM main drive system

Nonlinear Dynamics - Tunnel boring machine (TBM) is seriously damaged due to excessive vibration, and its anti-vibration design is the key of the drive system design. At present, the coupling model...     

Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> batteries

Manganese oxide-based cathodes are one of the most promising lithium-ion battery (LIB) cathode materials due to their cost-effectiveness, high discharge voltage plateau (above 4.0 V vs. Li/Li⁺), superior rate capability, and environmental benignity. However, these batteries using conventional LiPF₆-based electrolytes suffer from Mn dissolution and poor cyclic capability at elevated temperature. In this paper, the ionic liquid (IL)-based electrolytes, consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfon)imidate (PYR_1,4-TFSI), propylene carbonate (PC), lithium bis(trifluoromethanesulfon)imide (LiTFSI), and lithium oxalyldifluoroborate (LiDFOB) additive, were explored for improving the high temperature performance of the LiMn₂O₄ batteries. It was demonstrated that LiTFSI-ILs/PC electrolyte associated with LiDFOB addition possessed less Mn dissolution and Al corrosion at the elevated temperature in LiMn₂O₄/Li batteries. Cyclic voltammetry and electrochemical impedance spectroscopy implied that this kind of electrolyte also contributed to the formation of a highly stable solid electrolyte interface (SEI), which was in accordance with the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. Cyclic voltammetry and electrochemical impedance spectroscopy implied that the cells using this kind of electrolyte exhibited better interfacial stability, which was further verified by the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. These unique characteristics would endow this kind of electrolyte a very promising candidate for the manganese oxide-based batteries.