复注及多孔注浆理论研究

针对柱面注浆方式，研究了有关渗透注浆的单孔复注及不同方式布孔时多孔注浆的相互影响等问题，推导出一些有价值的岩体注浆理论公式，可用于指导现场注浆工程的设计与施工．     

The Isoelectric Point and the Points of Zero Charge of Fe-Al-Mg Hydrotalcite-like Compounds

The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc,which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.     

颗粒增强复合材料热应力分析的双层嵌套模型

建立了一个把增强颗粒球和基体空心球嵌入等效复合介质空腔中的“双层嵌套模型”,研究了颗粒增强材料自高温冷却下来时,不同相中热应力的分布特点。推出了热应力在弹性和弹塑性状态的各种表达式。研究表明,随着温度降低,增强体受到压应力,基体材料中存在的静水应力为拉应力。温度继续下降,将出现自增强颗粒与基体界面向外扩展的屈服区。随增强相体积分数增大,增强颗粒受到的压应力和基体中的静水拉应力减小,增强颗粒与基体界面屈服的起始温差增大,而基体材料全面屈服的温差却减小。     

Heterolytic and Homolytic N-NO Bond Dissociation Energies of N-Nitroso-benzenesulfonylmethylamines in Acetonitrile

Great interests have been accumulated in recent years in the chemistry and biochemistry of nitric oxide (NO) since the remarkable discoveries of its key roles in a wide range of human physiological processes. To elucidate the mechanistic details of NO migration from its donor to its acceptor, it is necessary to determine the Y-NO bind energy that registers the thermodynamic driving force for NO release and capture. In this paper the heterolytic and homolytic N-NO bond dissociation energies [ i. e., △Hhet(N-NO) and △Hhomo(N-NO)] for ten N-nitroso-p-substituted-benzensulfonyl methylamines in acetonitrile are offered, which were obtained from titration calorimetry and thermodynamic cycles, respectively (Scheme 1).     

Optimization of a Cryogenic System at Temperature 2 K for the PKU-FEL Facility

The conceptual design of a cryogenic system at temperature 2 K for the Peking University Free Electron Laser （PKU-FEL） facility is carried out. In order to minimize the scale of the cryogenic system and the running cost, the superconducting accelerator and the superconducting injector will mainly run at a long-pulsed mode. Optimization of the 2-K cryogenic system is carried out based on the heat load estimation and running parameters. Total cooling power of 52.5 W for the long-pulsed mode is necessary for the PKU cryogenic system. The PKU cryogenic system will be the first 2-K system for accelerators in China and will provide experience for similar facilities.     

不同沉淀剂制备的Ag／TS－1催化丙烯直接气相氧化合成环氧丙烷

 在423K、常压固定床石英反应器中，以丙烯直接气相氧化为探针反应，考察了催化剂制备方法、沉淀剂的种类和浓度对制备的Ag／TS－1催化剂催化性能的影响，采用TEM，XRD和UV－Vis等表征手段对Ag／TS－1催化剂进行了分析．结果表明，沉积－沉淀法是最佳的催化剂制备方法，但浸渍法也可制得具有环氧丙烷选择性的催化剂．K2CO3是一种良好的沉淀剂．以K2CO3为沉淀剂，硅钛比为64的TS－1为载体制备的Ag／TS－1催化剂上的丙烯转化率为1．72％，环氧丙烷选择性为98．2％．少量单质银的存在有利于环氧丙烷的生成，除银粒子的分散状态外，银粒子与载体TS－1间的相互作用对提高催化剂的选择性具有决定性作用．     

COORDINATION COPOLYMERIZATION OF STYRENE WITH MALEIC ANHYDRIDE BY RARE-EARTH COORDINATION CATALYSTS

The study on coordination copolymerization of styrene (S) with maleic anhydride (MA) by rare-earth coordination catalysts, NdL_3-Al(i-Bu)_3, has been successfully carried out for the first time. Some features, kinetic behavior, and mechanism of the SMA copolymerization by Nd(naph)_3-Al(i-Bu)_3 system are described and discussed. The copolymex of styrenemaleic anhydride prepared by the NdL_3-Al(i-Bu)_3 systems in benzene at 50℃ is an alternating-rich white powder having high number-average molecular weight of 6—8.5×10~5. The overall activation energy for the polymerization was found to be 10.5KJ/mol. The polymerization was not suppressed by addition of hydroquinone. The catalytic activity of various ligands in NdL_3 for the copolymerization decreases in the following order: Nd (naph)_3>Nd-(P_(507))_3～NdCl_3-6H_2O>Nd(P_(204))_3>Nd(acac)_3. 3H_2O. The experimental results are explained based on a mechanism to be the coordination-type copolymerization in terms of the participation of a monomer-monomer c     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.