一种刺松藻来源的硫酸阿拉伯聚糖的制备及特征结构表征

刺松藻(Codium fragile)经水提-醇沉获得粗多糖, 进一步将刺松藻粗多糖(CFP) 通过Q-Sepharose Fast Flow(QFF) 阴离子交换柱纯化得到6个多糖组分CFP1CFP6, 其中, 在CFP6中发现纯度较高的阿拉伯聚糖. 采用高效凝胶渗透色谱与十八角激光散射仪联用法和1-苯基-3-甲基-5-吡唑啉酮(PMP)柱前衍生高效液相色谱法对CFP6的分子量及单糖组成进行了分析. 结果表明, CFP6是一种分子量为79290的多糖, 由阿拉伯糖(Ara)和半乳糖(Gal)组成, 二者摩尔比为14.8:1.0. 通过多维核磁共振波谱、 液相色谱-质谱联用及二级质谱等方法对CFP6的糖苷键连接方式及其寡糖序列结构进行表征, 进一步阐明了该复杂多糖的特征结构. 经判断, CFP6主链由Ara组成, 通过 β-(1→3)糖苷键连接, 在Ara的C2位存在分支结构, 硫酸基位于Ara的C4或C2位.     

电喷雾质谱在寡糖序列分析中的应用

选取具有不同结构特征的N-糖链、硫酸软骨素寡糖、人乳寡糖以及海洋来源的壳寡糖、褐藻胶寡糖、卡拉胶寡糖和硫酸岩藻寡糖等,对电喷雾质谱在寡糖的主链序列、分支位点、硫酸基取代位置确定、单糖组成和聚合度分析等方面的应用技术及碎片离子的断裂规律进行了总结.根据相邻同类碎片离子之间的质荷比差值可初步判断寡糖的单糖组成类型;通过与色谱分离技术联用或衍生化方法可提高寡糖的分辨率和离子化效率,并测得寡糖的分子量及聚合度;借助串联质谱及对寡糖还原端的特异性标记,可获得寡糖的还原端残基和部分序列信息;根据寡糖产生的特征碎片离子及其丰度大小可判断残基的特定位置和类型.另外,寡糖的分支通常作为一个整体发生糖苷键断裂或产生D离子,据此可判断分支点的位置;根据硫酸寡糖产生的特异性跨环断裂碎片,可以确定硫酸基的连接位置.这些规律和方法的总结为未知寡糖的结构和序列的分析提供了启发和指导.     

中性人乳寡糖的分离及结构鉴定

以脱脂、除蛋白后的人乳为原料,联合运用阴离子交换色谱(AEC)、凝胶渗透色谱(GPC)和多孔石墨化碳色谱(PGC)等多种分离纯化技术制备了18种中性人乳寡糖,并采用电喷雾碰撞诱导串联质谱(ESI-CIDMS/MS)技术对其结构进行了鉴定.结果表明,所制备的中性人乳寡糖主要为三至九糖,含有半乳糖(Gal)、葡萄糖(Glc)、N-乙酰葡萄糖胺(GlcNAc)和岩藻糖(Fuc).所有寡糖的还原端均含有乳糖核心(Galβ1-4Glc),非还原端均含有乳糖胺(Galβ1-3/4GlcNAc),并且Fuc以α1-2,α1-3和α1-4连接于主链的Gal,Glc和GlcNAc上.     

Diminishing hazardous air pollutant emissions from pyrolysis of furan no-bake binders using methanesulfonic acid as the binder catalyst

The formation of hazardous air pollutants (HAPs) in thermal decomposition of furan no-bake foundry binders was investigated using analytical pyrolysis techniques. Two furan binders cured with p-xylenesulfonic acid (conventional acid catalyst used in foundries) and methanesulfonic acid (alternative catalyst proposed for diminishing HAPs) were flash pyrolyzed in a Curie-point pyrolyzer at 920 °C and slowly pyrolyzed in a thermogravimetric analyzer from 50 to 800 °C with a heating rate of 20 °C min^?1. Similar HAPs (mainly benzene, toluene, and xylenes) were identified in the emissions of the two binders. However, the HAP yields were much higher for the binder cured with p-xylenesulfonic acid than for the binder cured with methanesulfonic acid (3.74 and 1.24 mg HAPs/g binder pyrolyzed, respectively). By analyzing the HAP formation pathways, it was concluded that for the binder cured with p-xylenesulfonic acid, the aromatic HAPs were originated mainly from the acid catalyst. In addition, some HAPs (predominantly benzene) could be formed from the recombination of furan-derived fragments (e.g., C₂–C₄ radicals generated from ring-opening of furans). The results suggest that by replacing the conventionally used catalysts (arylsulfonic acids) with methanesulfonic acid, the HAP emissions from furan no-bake molds can be decreased significantly in metal casting processes.     

Mechanistic insights into regioselective polymerization of 1,3‐Dienes catalyzed by a bipyridine‐ligated iron complex: A DFT study

The regioselective polymerizations of isoprene and 3‐methyl‐pentadiene catalyzed by a cationic iron (II) complex bearing bipyridine ligand have been computationally studied. Having achieved an agreement between calculation and experiment, it is found that the open‐shell unpaired 3d‐electrons localize on Fe center rather than partially distribute on the redox‐active bipyridine ligand. The steric effect plays a more important role in controlling the regioselectivity in comparison with electronic factors. The deformation energy is mainly contributed by monomer and Fe‐alkyl moieties rather than the bipyridine ligands themselves, although noncyclopentadienyl ancillary ligands are often deformed in most insertion transition states for selective polymerization of olefin. © 2016 Wiley Periodicals, Inc.     

一种液晶共聚酯/粘土纳米复合材料的制备及其相转变温度

一些无机微粒被广泛用做聚合物的增强材料,其中特别引起人们注意的是一种粘土,即蒙脱土（ｍｏｎｔｍｏｒｉｌｌｏｎｉｔｅ）．蒙脱土具有层状结构,其特点一是微粒尺寸小,二是可以和多种单体发生插层聚合反应,给出聚合物／蒙脱土纳米复合材料［１～３］．纳米复合材料指的是其基质中分散相的尺寸至少有一维小于１００ｎｍ数量级的复合材料．由于其纳米尺度效应、大的比表面积以及强的界面相互作用,纳米复合材料的物理力学性能优于相同组分常规复合材料．因此,无论从基本理论研究角度还是从应用角度上看,对聚合物纳米复合材料的研究都…     

杂多酸引发四氢呋喃聚合反应 Ⅱ.水的反应行为

前报我们对低腐蚀性非均相的磷钨杂多酸Ｈ３ＰＷ１２Ｏ４０（ＰＷ１２）引发体系进行了研究［１］,发现环氧乙烷（ＥＯ）可有效地促进ＰＷ１２引发的四氢呋喃（ＴＨＦ）聚合反应,大幅度地降低了引发剂用量,聚合物收率显著提高,并发现聚合过程中不存在链终止反应．产物...     

Highly Dispersed and Small‐Sized Nickel(II) Hydroxide Co‐Catalyst Prepared by Photodeposition for Hydrogen Production

Photodeposition has been widely used as a mild and efficient synthetic method to deposit co‐catalysts. It is also worth studying how to synthesize non‐noble metal photocatalysts with uniform dispersion. Different synthetic conditions in photodeposition have a certain influence on particle size distribution and photocatalytic activity. Therefore, we designed experiments to prepare the inexpensive composite photocatalyst Ni(OH)₂/g‐C₃N₄ by photodeposition. The Ni(OH)₂ co‐catalysts disperse uniformly with particle sizes of about 10 nm. The photocatalytic hydrogen production rate of Ni(OH)₂/g‐C₃N₄ reached about 19 mmol g^?1 h^?1, with the Ni(OH)₂ deposition amount about 1.57 %. During 16 h stability testing, the rate of hydrogen production did not decrease significantly. The composite catalyst also revealed a good hydrogen production performance under sunlight. The Ni(OH)₂ co‐catalyst enhanced the separation ability of photogenerated carriers, which was proved by surface photovoltage and fluorescence analysis.     

镉(Ⅱ)-半胱氨酸配合物对CdS量子点的荧光增强作用及其在离子检测中的应用

合成了弱配体柠檬酸三钠修饰的CdS量子点(Cit-CdS QDs), 透射电子显微镜表征结果表明, Cit-CdS QDs的粒径分布均匀(4~6 nm), 分散性好。 研究了金属离子(银(Ⅰ)离子、镉(Ⅱ)离子)、巯基化合物(巯基乙酸、半胱氨酸)以及金属离子(银(Ⅰ)离子、镉(Ⅱ)离子)与巯基化合物形成的配合物对Cit-CdS QDs荧光的影响。 发现金属离子(银离子、镉离子)与巯基化合物(巯基乙酸、半胱氨酸)形成的水溶性配合物可以显著增强Cit-CdS QDs的荧光, 配合物对Cit-CdS QDs的增强程度比单独的金属离子或巯基化合物均要高, 而且配合物修饰的CdS QDs对铜(Ⅱ)离子的响应要高于单独用金属离子或巯基化合物修饰的量子点。 建立了铜(Ⅱ)离子高灵敏度荧光检测方法, 该方法检测范围宽(1.0×10^-8~1.0×10^-6 mol/L), 检测限低(1.0×10^-9 mol/L)且具有很好的选择性, 拓展了配合物作为量子点修饰剂的应用。