Mathematics achievement and interest in mathematics from a differential perspective

In this article, we present results of an empirical study with 500 German students of grades 7 and 8. The study focussed on students' mathematics achievement and their interest in mathematics as well as on the relation between these two constructs. In particular, the results show that the development of an individual student's achievement between grade 7 and grade 8 depends on the achievement level of the specific classroom and therefore on the specific mathematics instruction Interest in mathematics could be regarded a predictor for mathematics achievement Moreover, our findings suggest that the students show hardly any fear of mathematics independent of their achievement level.     

The absorption of pulsed CO2-laser radiation by ethylene at total pressures from 25 to 3000 Torr

The absorption of pulsed CO₂-laser radiation by ethylene has been measured at total pressures from 25 to 3000 Torr, using the P(12) and P(14) lines in the 10.6 m band, with incident fluences from 0.1 to 0.7 J/cm². Marked deviations from the Beer-Lambert absorption law were observed, with the effective absorption coefficient varying with pressure, fluence, absorption path-length and the addition of non-absorbing gas. Pressure broadening of the rotational lines of the ethylene absorption spectrum was shown to be the major cause of these deviations, together with lesser effects which can be attributed to the rise in temperature of the absorbing gas during the laser pulse.     

Kinetic studies of nickel speciation in model solutions of a well-characterized humic acid using the competing ligand exchange method

Publications on the binding characteristics of metals with humic acid (HA) are sparse. Here we investigated the release of nickel from Ni(II)-HA complexes using model solutions of three different [Ni(II)]/[HA] mole ratios at three different pH values; we also compared the results with those of [Ni(II)]/[FA] complexes from previous work in this laboratory. Ligand exchange kinetics using the competing ligand exchange method (CLEM) were studied using two different techniques: graphite furnace atomic absorption spectrometry (GFAAS) with Chelex 100 resin as the competing ligand, and adsorptive cathodic stripping voltammetry (AdCSV) with dimethylglyoxime as the competing ligand to measure the rate of dissociation of Ni(II)-HA complexes. The results of the kinetic studies showed that as the [Ni(II)]/[HA] mole ratio was decreased, the rate of dissociation of Ni(II)-HA complexes decreased, and the proportion of free Ni²⁺ ions plus very labile nickel complexes decreased while the proportion of the less labile kinetically distinguishable components increased. Generally, the rate of dissociation of Ni(II)-HA complexes was slower than that of Ni(II)-FA complexes. Studies on the validity of the kinetic model showed that the concentrations of chemical species varied in a reasonable way with pH and the [Ni(II)]/[HA] mole ratios, indicating that the kinetically distinguishable components have chemical significance and the kinetic model is valid.     

Stereospecific rearrangements during the synthesis of pyrrolidines and related heterocycles from cyclizations of amino alcohols with vinyl Sulfones

Conjugate additions of amino alcohols derived from alpha-amino acids to vinyl sulfones, followed by N-benzylation, chlorination, and intramolecular alkylation, provide a convenient route to substituted pyrrolidines. The process is accompanied by the stereospecific rearrangement of substituents from the alpha-position of the amine to the beta-position of the product and takes place via the corresponding aziridinium ion intermediates. Another type of rearrangement was observed during the reaction of (2-piperidine)methanol or 2-(2-piperidine)ethanol with phenyl trans-1-propenyl sulfone, in which the methyl group appears to migrate from the beta- to the alpha-position of the sulfone moiety. This process involves the isomerization of phenyl trans-1-propenyl sulfone to phenyl 2-propenyl sulfone by the addition-elimination of catalytic benzenesulfinate anion to the former vinyl sulfone, followed by conjugate addition of the amino group to the latter sulfone. Chlorination and intramolecular alkylation then afford the corresponding rearranged indolizidine and quinolizidine derivatives, respectively.     

Recent advances of group 14 dimetallenes and dimetallynes in bond activation and catalysis

Since the first heavy alkene analogues of germanium and tin were isolated in 1976, followed by West''s disilene in 1981, the chemistry of stable group 14 dimetallenes and dimetallynes has advanced immensely. Recent developments in this field veered the focus from the isolation of novel bonding motifs to mimicking transition metals in their ability to activate small molecules and perform catalysis. The potential of these homonuclear multiply bonded compounds has been demonstrated numerous times in the activation of H₂, NH₃, CO₂ and other small molecules. Hereby, the strong relationship between structure and reactivity warrants close attention towards rational ligand design. This minireview provides an overview on recent developments in regard to bond activation with group 14 dimetallenes and dimetallynes with the perspective of potential catalytic applications of these compounds.

This minireview highlights the recent advances in small molecule activation and catalytic applications of homonuclear dimetallenes, dimetallynes and interconnected bismetallylenes of heavier group 14 elements.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

Kinetic Analysis of the Reactions between GG-Containing Oligonucleotides and Platinum Complexes. 1. Reactions of Single-Stranded Oligonucleotides with cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) and [Pt(NH(3))(3)(H(2)O)](2+)

Using concentration measurements based on high performance liquid chromatography, we have investigated the kinetics of reaction between single-stranded oligonucleotides containing a d(GpG) sequence, i.e., d(GG), d(TGG), d(TTGG), and d(CTGGCTCA), and the platinum complexes cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) (1) and [Pt(NH(3))(3)(H(2)O)](2+) (2). The rate constants for the substitution of one aqua ligand of platinum in 1 or 2 by each guanine of the oligonucleotides were individually measured, as well as, for 1, those for the subsequent conversion of the monoadducts to the diadduct. For the platination of d(GG) and d(TGG), the rate constants are similar for the 5'- and 3'-guanines. The longer oligonucleotides d(TTGG) and d(CTGGCTCA) are platinated slightly faster on the 5'-G than on the 3'-G. 2 shows a similar slight preference for the 5'-guanine, but it reacts by a factor of 4-10 more slowly than 1. For both complexes, the platination rate constants increase with increasing oligonucleotide length. Platination of the 5'-G by 1 is 1 order of magnitude faster on d(CTGGCTCA) than on d(GG). Concerning the chelation step giving the GG diadduct of 1, the longer the oligonucleotide, the larger is the ratio between the rates of the cyclization of the 3'- and 5'-monoadducts k(3)(')(c) and k(5)(')(c): k(3)(')(c)/k(5)(')(c) equals 1.4 for d(GG) and 3.3 for d(CTGGCTCA).     

Dialumenes – aryl vs. silyl stabilisation for small molecule activation and catalysis

Main group multiple bonds have proven their ability to act as transition metal mimics in the last few decades. However, catalytic application of these species is still in its infancy. Herein we report the second neutral NHC-stabilised dialumene species by use of a supporting aryl ligand (3). Different to the trans-planar silyl-substituted dialumene (3Si), compound 3 features a trans-bent and twisted geometry. The differences between the two dialumenes are explored computationally (using B3LYP-D3/6-311G(d)) as well as experimentally. A high influence of the ligand''s steric demand on the structural motif is revealed, giving rise to enhanced reactivity of 3 enabled by a higher flexibility in addition to different polarisation of the aluminium centres. As such, facile activation of dihydrogen is now achievable. The influence of ligand choice is further implicated in two different catalytic reactions; not only is the aryl-stabilised dialumene more catalytically active but the resulting product distributions also differ, thus indicating the likelihood of alternate mechanisms simply through a change of supporting ligand.

Ligand controlled reactivity: a trans-bent and twisted geometry enables dihydrogen activation and enhanced catalytic activity for NHC-stabilised dialumenes.     

2,2‐Dichloro‐1,3‐bis(trimethylsilyl)‐1,3‐diaza‐2‐silacyclopentane

In the title compound, C₈H₂₂Cl₂N₂Si₃, the central Si atom is tetrahedrally coordinated by two Cl and two N atoms in a molecule that has crystallographically imposed C₂ symmetry. Comparison is made with the isomorphous structure having titanium instead of silicon at the central position in the diazacyclopentane ring [Tinkler, Deeth, Duncalf & McCamley (1996). Chem. Commun. pp. 2623–2624].     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.