Natural convection heat transfer at reduced pressures

This paper experimentally studies the natural convection heat transfer characteristics on horizontal and vertical plates at pressures lower than atmospheric value. Eight different pressures ranging from 10Pa to 101.325kPa, and three heating loads were used in the experiments. It is found that natural convection heat transfer characteristics at reduced pressures are independent of the plate arrangements and present different behaviors in two pressure ranges, 10Pa < p < 1000Pa and p > 1000Pa. The experimental heat transfer results are correlated into a non-dimensional equation to help the thermal design of stratosphere aircrafts and airborne equipment.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

含有随机夹杂的统计非均匀弹性介质参数的分析

本文提出了随机点场理论用于研究含有随机夹杂的统计非均匀介质。本文不同于其它作者,一般均将随机理论建立在Eshelby的等效夹杂原理之上,而这里是建立在Kunin的微结构理论基础之上。作为理论的一个应用,本文对复合材料的有效模量及夹杂内部及周围微观场进行了计算。     

层板复合材料的疲劳剩余刚度统计分布模型

在分析现有关于层板复合材料疲劳剩余刚度衰退模型的基础上，根据层板复合材料在疲劳载荷作用下刚度衰退变化的现象，研究了疲劳载荷对层板复合材料刚度衰退的影响，建立了一个新的、更为合理的用于描述层板复合材料在常幅疲劳载荷作用下的刚度衰退模型，导出了剩余刚度统计分布的表达式，给出了确定模型参数的方法。为验证该模型，设计了几组测试实验，并利用试验结果对模型参数进行了估计。利用该统计分布模型，可以预报层板复合材料在给定应力水平的疲劳载荷作用下循环指定周次时剩余刚度的统计分布。实验数据表明，理论预报和实验结果符合得是很好的。     

光纤传感器对机敏复合材料结构性能的影响

本文通过实验研究了光纤传感器对埋光纤机敏复合材料机械性能的影响，详细分析了埋光纤机敏复合材料层板在外载作用下的应力分布，针对三种不同铺层方式，研究了六种树脂填充区对机敏复合材料层板应力集中的影响，得出了减小应力集中的有效方案。     

A light scattering and fluorescence emission coupled ratiometry using the interaction of functional CdS quantum dots with aminoglycoside antibiotics as a model system

Any signals, if their intensities have simple functional relationship with analyte concentration, can be applied to analytical purposes. Rayleigh light scattering signals and fluorescence signals are twins in flurospectroscopy, so the light scattering signals are the major interference when the Stokes shift is small. Herein, we propose a light scattering and fluorescence emission (LS-FL) coupled ratiometry using CdS quantum dots (QDs) as a fluorescence probe to detect aminoglycoside antibiotics (AGs). As model analytes, AGs, when attached to the surface of CdS-QDs via electrostatic interaction in aqueous medium, result in strong enhanced light scattering (LS) emission characterized at 376 nm and fluorescence quenching of CdS-QDs at 500 nm. Thus, a ratiometry using the coexistent light scattering and fluorescent emission signals has been proposed. Based on the linear relationship between logarithm of light scattering and fluorescence emission ratio (R) and logarithm of AGs concentration, a novel assay of AGs is established with the limits of detection (3σ) being 58-190 nmol l⁻¹, and applied successfully to detect AGs injection and serum samples.     

Full Dissolution of the Whole Lithium Sulfide Family (Li2S8 to Li2S) in a Safe Eutectic Solvent for Rechargeable Lithium–Sulfur Batteries

The lithium–sulfur battery is an attractive option for next‐generation energy storage owing to its much higher theoretical energy density than state‐of‐the‐art lithium‐ion batteries. However, the massive volume changes of the sulfur cathode and the uncontrollable deposition of Li₂S₂/Li₂S significantly deteriorate cycling life and increase voltage polarization. To address these challenges, we develop an ?‐caprolactam/acetamide based eutectic‐solvent electrolyte, which can dissolve all lithium polysulfides and lithium sulfide (Li₂S₈–Li₂S). With this new electrolyte, high specific capacity (1360 mAh g^?1) and reasonable cycling stability are achieved. Moreover, in contrast to conventional ether electrolyte with a low flash point (ca. 2 °C), such low‐cost eutectic‐solvent‐based electrolyte is difficult to ignite, and thus can dramatically enhance battery safety. This research provides a new approach to improving lithium–sulfur batteries in aspects of both safety and performance.     

Non-covalent anionic porphyrin functionalized multi-walled carbon nanotubes as an optical probe for specific DNA detection

With water-soluble anionic tetra (p-carboxyphenyl) porphyrin (TCPP) to solubilize multi-walled carbon nanotubes (MCNTs), we obtained a suspension that could be stable more than 1 week. With this TCPP/MCNTs suspension, we propose a spectrofluorometric method of DNA hybridization in this contribution. Our basic finding for this work is that the fluorescence from a dye-tagged single stranded DNA (ssDNA), which was directly added to the TCPP/MCNTs suspension, gets quenched, and the fluorescence could be remained if the dye-tagged single stranded DNA is first to be hybridized with its complementary target DNA to form a double stranded DNA (dsDNA) hybrid and added into the TCPP/MCNTs suspension. Mechanism investigations showed that the reason for the former is due to the adsorption of ssDNA on the surfaces of MCNTs, and that for the latter is due to the strong electrostatic repulsion force between the negative charge TCPP/MCNTs complexes and dsDNA. Thus, target DNA in a DNA sample and single-base mismatch in DNA sequences could be easily detected.     

Electrocatalytic Synthesis of Nylon-6 Precursor at Almost 100 % Yield

Synthesis of cyclohexanone oxime via the cyclohexanone-hydroxylamine process is widespread in the caprolactam industry, which is an upstream industry for nylon-6 production. However, there are two shortcomings in this process, harsh reaction conditions and the potential danger posed by explosive hydroxylamine. In this study, we presented a direct electrosynthesis of cyclohexanone oxime using nitrogen oxides and cyclohexanone, which eliminated the usage of hydroxylamine and demonstrated a green production of caprolactam. With the Fe electrocatalysts, a production rate of 55.9 g h⁻¹ g_cat⁻¹ can be achieved in a flow cell with almost 100 % yield of cyclohexanone oxime. The high efficiency was attributed to their ability of accumulating adsorbed hydroxylamine and cyclohexanone. This study provides a theoretical basis for electrocatalyst design for C−N coupling reactions and illuminates the tantalizing possibility to upgrade the caprolactam industry towards safety and sustainability.