Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

不同加载方式下路堤沉降性状与预测模型研究

从考虑土体流变的本构关系出发 ,证明了瞬时加载、线性或者近似线性加载和分级加载情况下路堤沉降的性状 ,提出了从数学上能满足各自变形特征的预测模型 ,工程实例分析表明了在不同条件下采用不同模型的合理性和实用性     

Stowage planning in maritime container transportation

We consider a stowage-planning problem of arranging containers on a container ship in the maritime transportation system. Since containers are accessible only from the top of the stack, temporary unloading and reloading of containers, called shifting, is unavoidable if a container required to be unloaded at the current port is stacked under containers to be unloaded at later ports on the route of the ship. The objective of the stowage planning problem is to minimize the time required for shifting and crane movements on a tour of a container ship while maintaining the stability of the ship. For the problem, we develop a heuristic solution method in which the problem is divided into two subproblems, one for assigning container groups into the holds and one for determining a loading pattern of containers assigned to each hold. The former subproblem is solved by a greedy heuristic based on the transportation simplex method, while the latter is solved by a tree search method. These two subproblems are solved iteratively using information obtained from solutions of each other. To see the performance of the suggested algorithm, computational tests are performed on problem instances generated based on information obtained from an ocean container liner. Results show that the suggested algorithm works better than existing algorithms.     

A simulated annealing algorithm for resource constrained project scheduling problems

This paper presents a simulated annealing algorithm for resource constrained project scheduling problems with the objective of minimising makespan. In the search algorithm, a solution is represented with a priority list, a vector of numbers each of which denotes the priority of each activity. In the algorithm, a priority scheduling method is used for making a complete schedule from a given priority list (and hence a project schedule is defined by a priority list). The search algorithm is applied to find a priority list which corresponds to a good project schedule. Unlike most of priority scheduling methods, in the suggested algorithm some activities are delayed on purpose so as to extend search space. Solutions can be further improved by delaying certain activities, since non-delay schedules are not dominant in the problem (the set of non-delay schedules does not always include an optimal solution). The suggested algorithm is flexible in that it can be easily applied to problems with an objective function of a general form and/or complex constraints. The performance of the simulated annealing algorithm is compared with existing heuristics on problems prepared by Patterson and randomly generated test problems. Computational results showed that the suggested algorithm outperformed existing ones.     

Preparation of well-aligned carbon nanotubes by pyrolysis of phenolic resin in anodic alumina pores

Well-aligned carbon nanotubes (CNTs) of high quality were synthesized by pyrolysis of phenolic resin at 800 °C in anodic alumina oxide (AAO) pores under argon protection. The innocuous source materials and safe operational conditions permit this method to synthesize well-aligned CNTs in large-scale and low cost. The formation mechanism of the synthesized CNTs is also proposed in this work by a series of visual sketches and is proved with obvious evidence. Firstly, phenolic resin nanotubes form in the template pores through the evaporation of solvent. Heat treatment then transfers these tubes into CNTs.     

Étude sur les familles normales et les familles quasi-normales de fonctions méromorphes

Rendiconti del Circolo Matematico di Palermo Series 1 -     

The role of cavity sites in surface-enhanced Raman scattering

Thermal desorption spectra (TDS) of pyridine from silver films deposited in ultra high vacuum are reported. Marked differences in the TDS are seen depending on the deposition conditions and the thermal history of the films, which have been correlated with surface-enhanced Raman scattering (SERS). These results as well as some of the observations in electrochemical systems are discussed in light of the recent Xe probe analysis carried out by Albano et al.     

Hydrothermal synthesis and structure characterization of a new 3D vanadium hydrogen phosphite with 14-ring channels: (C5N2H14)[VO(H2O)]3(HPO3)4·H2O

A new 3D vanadium hydrogen phosphite, (C₅N₂H₁₄)[VO(H₂O)]₃(HPO₃)₄·H₂O, has been prepared by hydrothermal reactions and characterized by single crystal X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and magnetic techniques. It crystallizes in the triclinic space group P-1 (no. 2) with , , , α=76.124(3)°, β=83.726(4)^o, γ=75.222(4)^o, Z=2. The structure is built up from sharing equatorial oxygen atoms of VO₅(H₂O) octahedra with HPO₃ tetrahedra, which can be viewed as a (3,4) connected net. The framework is mainly constructed by two types of four-ring related chains. Intrachain and interchain hydrogen bonds play an important role on supporting the framework structure. The 14-ring tunnels in the structure are filled with 1-methypiperazinium and water molecules, which also contribute the hydrogen bonding with the vanadium phosphite framework.     

New benzo[b]furans as electroluminescent materials for emitting blue light

[structure: see text] New functionalized mono- and bis-benzo[b]furan derivatives were synthesized and developed as blue-light emitting materials. They possessed a CN, CHO, CH=CHPh, CH=CPh(2), or CH=CHCOOH group at the C4-position. Two benzo[b]furan nuclei in bis-benzo[b]furan derivatives were connected by a divinylbenzene bridge. With good volatility and thermal stability, bis-benzo[b]furan 7a was fabricated as a device. It emitted blue light with brightness 53430 cd/m(2) (at 15.5 V) and high maximum external quantum efficiency 3.75% (at 11 V).