Biosensors designed for environmental and food quality control based on screen-printed graphite electrodes with different configurations

Graphite electrodes fabricated by screen-printing have been used as amperometric detectors in biosensors based on NAD(+)-dependent dehydrogenases, tyrosinase, or genetically modified acetylcholinesterases. The mono-enzyme sensors have been optimized as disposable or reusable devices for detection of a variety of substrates important in the food industry ( D-lactic acid, L-lactic acid, acetaldehyde) or in environmental pollution control (phenols and dithiocarbamate, carbamate and organophosphorus pesticides). The sensors were prepared in four configurations differing in enzyme confinement, enzyme immobilization and location of the immobilization agent in the biosensor assembly. Tests on real samples have been performed with the biosensors; D-lactic acid and acetaldehyde have been detected in wine and phenols in air.     

A Class of Non-associated Materials: n-Monotone Materials—Hooke’s Law of Elasticity Revisited

Generalized Standard Materials are governed by maximal cyclically monotone operators and modeled by convex potentials. Géry de Saxcé’s Implicit Standard Materials are modeled by biconvex bipotentials. We analyze the intermediate class of n-monotone materials governed by maximal n-monotone operators and modeled by Fitzpatrick’s functions. Revisiting the model of elastic materials initiated by Robert Hooke, and insisting on the linearity, coaxiality and monotonicity properties of the constitutive law, we illustrate that Fitzpatrick’s representation of n-monotone operators coming from convex analysis provides a constructive method to discover the best bipotential modeling a n-monotone material. Giving up the symmetry of the linear constitutive laws, we find out that n-monotonicity is a relevant criterion for the materials characterization and classification.     

Mesoporous carbon supported ultrasmall palladium particles as highly active catalyst for Suzuki‐Miyaura reaction

A fast and efficient eco‐friendly two‐step preparation of a palladium‐containing mesoporous carbon catalyst ( C1 ) from green and readily available carbon precursors (phloroglucinol and glyoxal), a porogen template (pluronic F‐127) and PdCl₂ is described. Catalyst C1 contains ultra‐small Pd nanoparticles (1.2 nm) uniformly dispersed in the carbon network and shows an outstanding activity for Suzuki‐Miyaura reactions in pure water: extremely low amounts of palladium (10 μequiv. in most cases) are sufficient to afford almost palladium‐free products (containing <0.25 ppm of precious metal without further purification steps).     

Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).     

In-syringe magnetic-stirring-assisted liquid–liquid microextraction for the spectrophotometric determination of Cr(VI) in waters

A fully automated method for the determination of chromate is described. It is based on the selective reaction of Cr(VI) with diphenylcarbazide in acidic media to form a colored complex of Cr(III) with the oxidation product diphenylcarbazone. The reaction was performed within the syringe of an automatic burette containing a magnetic stirrer for homogenization of the sample and the required reagents. In-syringe stirring was made possible using a specially designed driving device placed around the syringe barrel to achieve a rotating magnetic field in the syringe, forcing the stirrer to spin. In a second step, the reaction mixture in the syringe was neutralized to allow in-syringe magnetic-stirring-assisted dispersive liquid–liquid microextraction of the complex into 125 μL of n-hexanol. After phase separation by droplet flotation over 30 s, the organic phase was propelled into a coupled spectrophotometric detection cell. The entire multistep procedure including in-system standard preparation was done within 270 s. The method was used for the analysis of natural waters, achieving average analyte recovery of 103 %, a limit of detection of 0.26 μg L^-1, and a repeatability of less than 4 % relative standard deviation.     

Influence of surface chemistry on the adsorption of oxygenated hydrocarbons on activated carbons

The objective of this work was to study the adsorption of different oxygenated hydrocarbons (methanol, ethanol, 1 and 2-butanol, methyl acetate) on activated carbons from organic mixtures with cyclohexane. Three activated carbons prepared by thermal and chemical treatments of a commercial carbon were employed for this purpose. Their textural properties were found to be similar, whereas their surface chemistries were modified, as shown by temperature-programmed desorption coupled to mass spectrometry (TPD-MS) and X-ray photoelectron spectroscopy (XPS). The adsorption isotherms were obtained by depletion method, and the analysis of adsorbed species was evaluated by TPD-MS to obtain new insight into the interactions between the different hydrocarbons and the carbon surface. Ethanol leads to a high-energy interaction between its hydroxyl function and the oxygenated surface groups and also to a lower energy interaction between the aliphatic part of the molecule and the carbon material. The desorption activation energy for this hydrophilic interaction is high (50 to 105 kJ/mol), and it is related to the nature of the carbon surface groups. The relative importance of these two interactions depend on the size of the alcohol/methanol is similar to ethanol, whereas butanols lead to more dispersive interactions. Methyl-acetate cannot undergo this kind of strong interaction and behaves like cyclohexane, having desorption activation energies ranging between 25 and 45 kJ/mol no matter the molecule and the carbon surface chemistry.     

A simple method for the preparation of colloidal polymer-supported silver nanoparticles

Polysulfone?silver composite nanoparticles have been prepared by combining polymer nanoprecipitation and redox synthesis of silver, in the presence of a glucose-modified cyclosiloxane as stabilizing agent. Based on previous kinetic investigations and on model reactions, we concluded that the reducing agent in this case is the tetrahydrofuran (THF) used as solvent for polysulfone. Dynamic light scattering measurements on the obtained polymer-silver composite particles indicated particle average diameter of 176 nm with a polydispersity index of 0.25. The UV–vis spectrum exhibited the silver plasmon resonance. By different microscopic methods (atomic force microscopy—AFM, high resolution transmission electron microscopy—HRTEM, and scanning electron microscopy—SEM), larger polymer particles coated with silver nanoprticles were observed. The Energy Dispersive X-Ray analysis—EDX; confirmed the presence of Ag on the surface of the particles, while the selected area electron diffraction showed single crystalline silver nanospheres with face-centered cubic structure.     

New PP/PLA/cellulose composites: effect of cellulose functionalization on accelerated weathering behavior (accelerated weathering behavior of new PP/PLA/cellulose composites)

Polylactic acid (PLA) was used as partial replacement for conventional thermoplastic matrix, new composites comprising cellulose, polypropylene (PP), and PLA being realized. In order to obtain a compatible interface between cellulosic pulp and polymeric matrix, two chemical modifications of cellulose with stearoyl chloride and toluene di‐isocyanate (TDI) were performed, structural changes being evidenced by X‐ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The composite materials were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic scanning calorimetry, impact, tensile and melt rheological tests, surface tension, and dynamic vapor sorption. Because promising results for impact strength and Young modulus were recorded when replacing 15% of PP with PLA in blends of PP with the same cellulosic pulp load, the aim of our study was to assess the behavior to accelerate weathering of composites comprising PP, cellulosic pulp, and PLA. Although the slight decrease in the mechanical properties was recorded after accelerated weathering, the use of functionalized cellulose successfully prevented the deterioration of surface materials, especially for composite comprising stearoyl chloride treated cellulose pulp. Copyright © 2015 John Wiley & Sons, Ltd.