Structure of a poly(2,5‐benzimidazole)/phosphoric acid complex

As‐cast films of poly(2,5‐benzimidazole) exhibit uniplanar orientation in which the planes of the aromatic rings lie parallel to the film surface. Upon doping with phosphoric acid, the original crystalline order is lost, but the doped film can be stretched to produce films with uniaxial orientation. After thermal annealing at 540 °C, nine Bragg reflections are resolved in the fiber diagram, and these are indexed by an orthorhombic unit cell with the dimensions a = 18.1 Å, b = 3.5 Å, and c = 11.4 Å, containing four monomer units of two chains. The absence of odd‐order 00l reflections points to a 2₁ chain conformation, which is probably planar so that the aromatic units can be stacked along the b axis. The water and phosphoric acid contents of the crystalline structure cannot be determined exactly because of the presence of extensive amorphous regions that probably have different solvation. The best agreement between the observed and calculated intensities is for an idealized structure containing two phosphoric acids and two water molecules per unit cell. However, the phosphoric acid is probably present mainly in the form of pyrophosphoric acid and its higher oligomers. In addition, the X‐ray data are consistent with a more disordered structure containing chains with random (up and down) polarity and a lack of c‐axis registry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2576–2585, 2004     

A Note on Groups Associated with 4-Arc-Transitive Cubic Graphs

A cubic (trivalent) graph is said to be 4-arc-transitive ifits automorphism group acts transitively on the 4-arcs of (wherea 4-arc is a sequence v₀, v₁, ... v₄ of vertices of such thatv_i–1 is adjacent to v_i for 1 i 4, and v_i–1 v_i+1for 1 i < 4). In his investigations into graphs of thissort, Biggs defined a family of groups 4⁺(a^m), for m = 3,4,5...,each presented in terms of generators and relations under theadditional assumption that the vertices of a circuit of lengthm are cyclically permuted by some automorphism. In this paperit is shown that whenever m is a proper multiple of 6, the group4⁺(a^m) is infinite. The proof is obtained by constructing transitivepermutation representations of arbitrarily large degree.     

Mass spectrometry in cardenolide chemistry—I

The mass spectrum of penta acetyl gitoxin is reported and discussed. This cardenolide derivative has recently been the subject of extensive metabolic study. Fragmentation processes are described which account for all of the major ions. High resolution measurements, metastable peaks and mass shifts, for the propionyl derivative, are reported to establish the validity of these proposals. A brief indication of the potential value of this technique, when combined with deuteroacetylation, to metabolic studies in this field is given, along with comments on the spectra of related compounds.     

Photophysical properties of anthanthrene-based tunable blue emitters

Anthanthrene (1) derivatives substituted at the 4,10 and 6,12 positions (2-6) were synthesized as promising candidates for organic light emitting diodes (OLEDs). The emission of these compounds can be manipulated in the blue region (lambda(max) = 437-467 nm) through structural modifications. Photophysical and electrochemical properties (phi(F) = 0.20-0.47; tau(F) = 2.97-6.06 ns; HOMO-LUMO energy gap = 2.25-2.56 eV) as well as geometry optimized structures of 1-6 are reported.     

ESR spectra of AsF2−6 and SbF2−6

ESR spectra observed in γ-irradiated CsAsF₆ and CsSbF₆ matrices have been assigned to the free radicals AsF^2?₆ and SbF^2?₆ respectively. The large, isotropic central-atom hyperfine interactions and isotropic g-values of these species suggest that they possess ²A_tg ground-states in O_h symmetry. The contribution to the semi-occupied orbital of the central-atom valence s atomic orbital is ≈ 0.6, greater than in the halogen hexafluorides (≈0.4) and the chalcogen hexafluoride anions (≈ 0.5). Variation of the central-atom hyperfine interaction with temperature is interpreted in terms of a second-order Jahn-Teller effect involving a low-lying ²T_1u excited state.     

Synthesis and some properties of poly-(2,5-trimethylene benzimidazole) and poly-(2,5-trimethylene benzimidazole hydrochloride)

A polymer, poly(2,5-trimethylene benzimidazole), the first of a new family of nonsymmetrical polymers, was synthesized via an eight-step synthetic route. The polymer, obtained by melt polymerization, is amorphous and in its neutral form behaves as a moderate insulator. It forms 1 : 1 HCl adducts. When cast from formic acid solution, it forms 1 : 1 formic acid adducts. The acid adducts are semiconductors with resistivities in the 10⁶–10⁸ ohm-cm range. Space-charge effects are generated in the adducts as carrier mobility rises.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

Preparation of poly(methyl methacrylate) and copolymers having enhanced thermal stabilities using sucrose-based comonomers and additives

A series of methyl methacrylate polymers have been prepared containing sucrose-based crosslinkers and additives. Thermogravimetry and long-term aging studies at 200°C show that sucrose-based alkyl and allyl ethers provide unprecedented thermal stability to linear, as well as crosslinked, poly (methyl methacrylate) or PMMA. Linear PMMA and PMMA crosslinked with trimethylolpropane trimethacrylate (TMPTMA) both degrade at 284°C. PMMA containing octa-O-crotylsucrose (1 mol %) degraded at 322°C. Depending on concentration, PMMA containing octa-O-allylsucrose (0.1-1.0 mol % and higher) degraded between 334 and 354°C, and PMMA containing 1′,6,6′-trimethacryloyl-2,3,3′,4,4′-penta-O-methylsucrose (0.1-1.0 mol %) degraded between 309 and 320°C. PMMA containing (1 mol % each) sucrose-based esters, ester-ether derivatives, all degraded at or below the degradation temperature of pure PMMA. Long-term air aging studies revealed that PMMA containing penta-O-methylsucrose trimethacrylate, octa-O-allylsucrose, and octa-O-crotylsucrose did not flow or sag after heating for 24 h at 200°C, but the polymers did show yellowing. While linear and crosslinked samples of PMMA containing compounds other than sucrose ethers lost more than 50% of their original weight within 15 h at 200°C, PMMA containing sucrose-based ethers lost about 8 and 20% of their original weight after 1 and 8.5 days, respectively. Herein we propose a unique mechanism by which saccharide ethers may be imparting this unprecedented thermal stabilization to PMMA. While tertiary hydrogens alpha to oxygens in saccharide ethers are stable to chain transfer during normal polymerization temperatures, they readily chain transfer at 200°C where PMMA is unstable. Chain transfer of these hydrogens is followed by fragmentation to produce alkyl, allyl or crotyl radicals, which combine with the macroradicals and terminate depropagation. © 1995 John Wiley & Sons, Inc.