X-Ray Structure and Proton NMR Study of a Hexacoordinated Lithium Complex

The structure of the lithium complex with1,3,5-tris[oxymethylene(N,N-dicyclohexyl)carboxyamido]cyclohexanehas been determined by the X-ray method.The compound is triclinic, space group P¯1,a = 15.623(3), b = 19.279(4),c = 19.295(4)Å = 102.32(3), = 92.45(3), = 105.67(3)0, V = 5436(2)Å3, Z = 4. Itscomposition is represented by the formulaC48H82N3O6LiI 0.5H2O. The lithium cationis encapsulated in a polar pseudo-cavity of six oxygen atoms of the ligandmolecule and displays a distorted trigonal prism coordination. The conformationof the ligand in the solid state complex has been compared with the conformationof the complex in solution determined by 1H-NMR measurements.Supplementary data relevant to this publication have been deposited with the British Library, No. SUP 82224 (21 pages).     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]⁺[FAP]^?), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]⁺[Trif]^?), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]⁺[FAP]^?), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log₁₀ units, respectively.     

Experimental results on neutrino-electron scattering

A determination of sin² θ _w based on measurements of elastic scattering of muon-neutrinos and muon-anti-neutrinos on atomic electrons is described. These purely leptonic processes were studied using the CHARM calorimeter exposed to neutrino and antineutrino wide-band beams at the CERN super proton synchrotron. A total of 83±16 neutrino-electron and 112±21 antineutrino-electron events have been detected. From the measurement of the ratio of muon-neutrino and muon-antineutrino cross-sections a value of sin² θ _w =0.211±0.037 was obtained.     

An investigation on dispersion of carbon nanotubes in chitosan aqueous solutions

The dispersion of carbon nanotubes (CNT) in water of different pH and in chitosan aqueous solution of three acids, acetic acid, formic acid, and hydrochloric acid, was investigated. Chitosan was soluble in water of pH ≤3 and could well disperse untreated CNT and acid-treated CNT, both of which had poor dispersion in water of pH ≤3. With the presence of 0.1 wt% chitosan in solution, particle sizes of the CNT dispersion were found to decrease with increasing COOH contents on the CNT. Particle sizes of CNT, untreated and acid-treated, in the three acidic aqueous solutions were found to increase with increasing chitosan contents in solutions. Among the three acids, hydrochloric acid gave the smallest particle size of the CNT dispersion. Without chitosan, the dispersibility of the acid-treated CNT in aqueous solutions of three acids was in the order of acetic acid > formic acid > hydrochloric acid.     

Effects of carbon nanotubes on dynamic mechanical property,thermal property,and crystal structure of poly(L‐lactic acid)

Effects of carbon nanotubes (CNT) on the dynamic mechanical property, thermal property, and crystal structure of poly(L ‐lactic acid) (PLLA) were investigated. Dynamic mechanical analysis (DMA) found that CNT via grafting modification with PLLA (CNT‐g‐PLLA) could result in effective reinforcing effects. Tan δ of DMA found that CNT‐g‐PLLA was compatible with the PLLA matrix, giving a single T_g of the composite with a higher CNT‐g‐PLLA loading giving a higher T_g of the composite. Wide angle X‐ray diffraction (WAXD) data demonstrated that CNT could assist the disorder‐to‐order (α′‐to‐α) transition in PLLA crystals but did not lead to a more compact chain packing of the crystal lattice in PLLA composites than in pure PLLA. The equilibrium melting temperature (T) obtained from Hoffman‐Weeks plots were found to increase with increasing CNT‐g‐PLLA content. Small angle X‐ray scattering data revealed that thicknesses of crystal layer and amorphous layer of PLLA both decreased with increasing CNT contents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 145–152, 2010     

Truncation rules for modelling discontinuities with Galerkin method in electromagnetic theory

It is well known that apparently similar discretization schemes of Maxwell's equations in Fourier series may provide very different convergence performances because of truncation. We argue that this work performed in grating theory can be applied to other electromagnetic theories relying on expansions over series different from Fourier series. This generalization is supported by an intuitive argument and by a simple numerical example with Hermite–Gauss functions.     

Transport with a Very Low Density Contrast in Hele–Shaw Cell and Porous Medium: Evolution of the Mixing Zone

The optimal concentration of a blue dye solution with 'tracer' properties, enabling a pollutant to be marked was determined by the use of numerical, theoretical and experimental approaches. Experimental investigations were performed on a transparent Hele–Shaw cell and the concentration distribution was analyzed using an optical technique based on dye light absorption properties. The injected optimal concentration was established thanks to a theoretical and experimental study carried out on the output signal dynamics. Using the same experimental conditions, numerical simulations were performed. The very good agreement between the data (experimental and numerical) clarified that: (i) the choice of the blue dye optimal concentration was valid and (ii) the concentration-dependent density should not be neglected in flow and transport equations even if it concerns a so-called 'tracer'. Following this remark, a theoretical aspect was developed in order to determine the analogous conditions between a Hele–Shaw cell and a porous medium for the variable density transport phenomenon. The structure of the concentration-dependent dispersion tensor used in the numerical code was obtained by homogenizing the Stokes flow of a bi-component mixture. The numerical results show that, as long as the tracer density does not exceed a certain value, it is not necessary to take into account a density contrast in terms of the dispersion tensor. The classical form of the Taylor dispersion tensor can be used successfully.     

The mean squared torque in pure and mixed dense fluids

The mean squared torque on a molecule can be obtained from infra-red or Raman band moments, and provides a direct measure of the strength of the anisotropic intermolecular forces. The expression for the mean squared torque on a molecule of species α in a fluid mixture is given in terms of the intermolecular potential and the angular pair correlation functions. This relation is made tractable by introducing a perturbation expansion in powers of the anisotropic potential strength for the angular pair correlation functions. Monte Carlo calculations of the mean squared torque are presented for a liquid of linear molecules having dipolar, quadrupolar and anisotropic overlap interactions. Comparison of the perturbation expansion to second order with these ‘exact’ results shows good agreement for μ*=μ/(εσ³)^1/2 and Q*=Q/(εσ⁵)^1/2 values less than about 0·5, and for values of the dimensionless overlap constant |δ| less than about 0·2. Finally, experimental values of the mean squared torque for both pure and mixed liquids are compared to the Monte Carlo and to the perturbation theory results.