Automated derivatization for on-line solid-phase extraction-gas chromatography; phenolic compounds

An automated system for derivaatization was coupled on-line with solid-phase extraction-gas-chromatography (SPE-GC). The system was optimized for the determination of phenol and chlorinated phenols in aqueous samples. The test analytes were acetylated with acetic anhydride; proper buffering of the sample was a critical factor. Next, the phenol acetates were enriched on a SPE cartridge and transferred to a GC; two appraoaches were studied. In the first approach, the derivatives were enriched on disposable C18 cartridges (ASPEC type) and desorbed with methylacetate. Aan aliquot of the final eluate was injected on-line the GC by means of a loop-type interface. In the second approach, trace enrichment was performed on 10 × 2 mm i.d. LC-type precolumn packed with polystyrenedivinylbenzene copolymer (PLRP-S) this precolumn was dried with a mitrogen purge and the phenol acetates were desorbed with ethyl acetate which was injectedon-line into the retention gap of the GC under partially concurrent solvent evaporation (PCSE) conditions. The Derivatization-SPE-GC system which was based on the loop-type interface has the advantage of simplicity and easy operation, the main drawback is the impossibility to determine phenol acetates which elute prior to trichlorophenol acetates. With the derivatization-SPE-GC approach using PCSE-based desorption, even the most volatile analyte of the test series, phenol acetate, can be determined successfully. The entire procedure, including the derivatization step, was fully automated and integrated in one set-up. The precision data for the integrated on-line derivatization-SP-FID system were fully satisfactory, with RSD values of 1–12 % at the 1 μg/1 level. When a sample volume of 2.2 ml was analyzed, The detection limits for the chlorinated phenol acetates were in the 0.1–0.3 μg/1 range.     

The extraction of Cr(III) from aqueous thiocyanate solutions and its separation from Co(II) and Ni(II)

For the system liquid anion-exchanger—Cr(III)−NCS⁻, an investigation has been made of the dependence of the percentage extraction of Cr(III) on parameters such as standing time of the Cr(III)−NCS⁻ solution, temperature, pH and type of exchanger. Quantitative extraction of e.g. 4·10⁻⁴ M Cr(III) by 0.1M Aliquat in CCl₄ is easily achieved at room temperature, using 4.75M KNCS−0.05N HCl as aqueous phase. At high Cr(III) concentrations, the complex anion present in the organic phase is Cr(NCS) ₆ ³⁻ ; when working with dilute metal ion solutions, the species extracted is Cr(NCS)₄ (H₂O) ₂ ⁻ . Separations of mixtures containing 10⁻²−10⁻⁴ M Co(II), Ni(II) and Cr(III) have successfully been accomplished.     

Drying agents for water-free introduction of desorption solvent into a GC after on-line SPE of aqueous samples

Summary A small cartridge containing a drying agent is inserted between a solid phase extraction (SPE) column and a gas chromatograph (GC) to enable the introduction of water-free desorption solvent into the GC in on-line liquid chromatography (LC)-type enrichment of trace-level analytes from water samples. Some characteristics of the drying agents, such as their capacity to retain water and their re-usability after heating, have been tested. Possible interactions of the drying agent with the analytes, e.g., irreversible adsorption or catalyzed degradation, have been checked for a wide range of alkanes, alkylbenzenes chlorobenzenes, chlorophenols and phthalate esters. Using the on-line SPE-GC system with flame ionization detection (FID) and spiked samples containing different levels of the test compounds, the repeatability was shown to be satisfactory (6–17%). For 10 mL samples, the detection limits were lower than 0.1 g/L. The on-line SPE-GC-FID system here presented can be used for the repeated analysis of water samples without exchange of the dyring cartridge. The technique is applied to the analysis of tap water.     

Comprehensive gas chromatography of high-boiling halogenated compounds

Summary Comprehensive gas chromatography is an excellent technique for separating complex mixtures. If, however high-boiling compounds such as polychlorinated biphenyls have to be analysed, proper adjustiment of the temperature of the modulator turns out to be very important in maintaining the performance of the system. It is shown that miniaturisation of the column-to-modulator coupling, adequate selection of the modulating conditions and, for halogenated compound mixtures, the use of a micro electron-capture detector, can solve experimental problems previously encountered with high boilers.     

Derivatization of carboxylic acids with 9-bromomethylacridine using micellar phase-transfer catalysis

Summary Micellar phase-transfer catalysis (MPTC) offers the opportunity to derivatize carboxylic acids directly in an aqueous matrix without prior extraction of the acids into a suitable aprotic solvent. The currently developed MPTC system consists of a non-ionic surfactant, Arkopal N-130, an ion-pair agent, tetrakis-(decyl)-ammonium bromide, and a novel fluorescence reagent, 9-bromomethylacridine. The MPTC system can be applied to the derivatization of many types of carboxylic acids. The reaction rate is affected by the lipophilicity of the acid and by the presence of other functional groups. For lipophilic carboxylic acids the reaction is complete within 5 min at 60°C and pH 7.0.     

High-speed liquid and thin-layer chromatography of polychlorinated biphenyls.

High-speed liquid chromatography in the system silica gel/dry n-hexane and ultraviolet spectrometry have been used to study the composition of various types of commercially available mixtures of chlorinated biphenyls. Special attention has been paid to the analysis of highly chlorinated products. In addition to data previously published, retention times are recorded for 11 individual polychlorinated biphenyls. The results of high-speed liquid chromatography are compared with those obtained in several normal and reversed-phase thin-layer chromatographic systems.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.