Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

Optimality relationships forp-cyclic SOR

Summary The optimality question for blockp-cyclic SOR iterations discussed in Young and Varga is answered under natural conditions on the spectrum of the block Jacobi matrix. In particular, it is shown that repartitioning a blockp-cyclic matrix into a blockq-cyclic form,q, results in asymptotically faster SOR convergence for the same amount of work per iteration. As a consequence block 2-cyclic SOR is optimal under these conditions.Research supported in part by the US Air Force under Grant no. AFOSR-88-0285 and the National Science Foundation under grant no. DMS-85-21154 Present address: Boeing Computer Services, P.O. Box 24346, MS 7L-21, Seattle, WA 98124-0346, USA     

On gauge invariance of Breit-Wigner propagators

We present an approach to bosonic (Z ^o,W ^±) as well as fermionic (top-quark) Breit-Wigner propagators which is consistent with gauge invariance arguments. In particular, for theZ ^o-boson propagator we extend previous analyses and show that the part proportional tok k _v /M ² must be modified near the resonance. We derive a mass shift which agrees with results obtained elsewhere by different methods. The modified form of a resonant heavy fermion propagator is also given.     

The electronic structure of vanadium carbide, VC

Within an energy range of 2.4 eV, we have explored 29 of the 36 states of the diatomic molecule VC that arise from the atoms in their ground state, V(4s23d3;4F)+C(2s2 2p2;3P). We use multireference methods with large atomic natural orbital basis sets. The ground state is of 2Delta symmetry with the first two excited states, 4Delta and 2Sigma+, located 4.2 and 7.0 kcal/mol above the X state. All the states examined in this work are relatively strongly bound and show significant charge transfer from V to C. The binding energy of the X 2Delta state is estimated to be 95.3 kcal/mol in good agreement with the experimental value.     

Extraction studies of antimony bromide into benzene

Antimony(III) can be extracted rapidly and quantitatively into benzene from a 10 M H₂SO₄–0.03 M HBr system. The extracted antimony bromide has an antimony to bromine ratio of 1:3. Under the above optimum conditions for extraction of antimony, the behaviour of 35 other elements was studied; As³⁺, Ge⁴⁺, Se⁴⁺, and Sn²⁺ were extracted almost quantitatively, and the percentage extraction of Hg²⁺, Bi³⁺, and Te⁴⁺ was 74.1%, 10% and 5.5% respectively. The extraction of the elements into benzene from a 5 M H₂SO₄–0.01 M KI system was also investigated, A comparison of the two systems is given.     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

Performance of Thyme Oil@Na-Montmorillonite and Thyme Oil@Organo-Modified Montmorillonite Nanostructures on the Development of Melt-Extruded Poly-L-lactic Acid Antioxidant Active Packaging Films

Today, the use of natural biodegradable materials in the production processes is more and more adopted by industry to achieve cyclic economy targets and to improve environmental and human health indexes. Active packaging is the latest trend for food preservation. In this work, nanostructures were prepared by incorporation of thyme oil with natural natrium-montmorillonite and organo-montmorillonite with two different techniques, direct impregnation and the green evaporation–adsorption process. Such nanostructures were mixed with poly-L-lactic-acid for the first time via an extrusion molding process to develop a new packaging film. Comparisons of morphological, mechanical, and other basic properties for food packaging were carried out via XRD, FTIR, TG, SEM/EDS, oxygen and water vapor permeation, and antimicrobial and antioxidant activity for the first time. Results showed that poly-L-lactic-acid could be modified with clays and essential oils to produce improved active packaging films. The final product exhibits food odor prevention characteristics and shelf-life extension capabilities, and it could be used for active packaging. The films based on OrgMt clay seems to be more promising, while the thyme oil addition improves their behavior as active packaging. The PLLA/3%TO@OrgMt and PLLA/5%TO@OrgMt films were qualified between the tested samples as the most promising materials for this purpose.