The influence of chitosan on in vitro properties of Eudragit RS microspheres

Eudragit RS microspheres containing chitosan hydrochloride were prepared by the solvent evaporation method using acetone/liquid paraffin solvent system and their properties were compared with Eudragit RS microspheres without chitosan, prepared in our previous study. Different stirring rates were applied (400-1200 rpm) and drug content, Higuchi dissolution rate constant, surface and structure characteristics of the microspheres were determined for each size fraction. An increase in average particle size with a reduction of stirring rate appeared in limited interval in both series. The average particle size of microspheres without chitosan, prepared at the same stirring rate, was smaller. Pipemidic acid content increased with increasing fraction particle size, but not with increasing stirring rate as it was observed for microspheres without chitosan. We presume that high pipemidic acid content in larger microspheres is a consequence of cumulation of undissolved pipemidic acid particles in larger droplets during microspheres preparation procedure. Pipemidic acid release was faster from microspheres with chitosan and no correlation between Higuchi dissolution rate constant and stirring rate or fraction particle size was found, though it existed in the system without chitosan. Structure and surface characteristics of microspheres observed by scanning electron microscope (SEM) were not changed significantly by incorporation of chitosan. But in contrast with microspheres without chitosan, the surface of chitosan microspheres was more porous after three hours of dissolution. It is supposed that the influence of particle size fraction and stirring rate on release characteristics is expressed to a great extent through porosity and indirectly through total effective surface area, but the incorporation of highly soluble component i.e. chitosan salt hides these effects on drug release. In conclusion, changes in biopharmaceutical properties due to varying stirring rate and fraction particle size exhibited the same direction as those reported for the microspheres without chitosan, although they are less expressed because of increased experimental variability, likely caused by chitosan.     

First carbamates conversion to amides by simple alkyl group transfer from trialkylalanes

[reaction: see text] N-Monosubstituted carbamates are cleanly converted to amides under treatment with trialkylaluminum. This reaction involves an aluminum-assisted internal delivery of alkyl groups. It can be applied to new and mild protecting group strategies for alcohols.     

Quantification of polyphenols and flavonoid content and evaluation of anti-inflammatory and antimicrobial activities of Stenocereus stellatus extracts

The hexanic, ethyl acetate and methanolic extracts from branches of Stenocereus stellatus were tested in both the 12-O-tetradecanoylphorbol-13-acetate (TPA) – induced ear oedema model and antimicrobial activity assay. The % of oedema inhibition, the Minimum Inhibitory Concentration (MIC), as well as the polyphenolic and flavonoid content were determined. Also, extracts were analysed by gas chromatography–mass spectrometry (GC–MS). In TPA model, the three extracts showed moderate oedema inhibition. In the antimicrobial activity assay, methanolic extract shows better MIC against all strains. The lowest MICs were for Candida albicans (31 μg/mL) and Rhizopus sp. (15 μg/mL). Also, 50.78 mg eq. of gallic acid/g extract of polyphenol and 115.12 mg eq. of catequine/g extract of flavonoids content were founded in ethyl acetate extract. In the chromatographic analysis, β-sitosterol, β-amyrine, betulin and some other molecules were identified. The results show that S. stellatus possess antimicrobial activities against some fungus species.     

Non-destructive analysis of pigments in a triptych by Marten de Vos

The Fine Arts Museum in Seville conserves an especially wide group of paintings from the 16th century Spanish art, among which one of the highest importance is a triptych attributed to Marten de Vos. One of the panels was recently restored, which opened a possibility for its material and technical analysis. For this research, only non-destructive techniques have been used: ultraviolet light, infrared reflectography, and X-ray fluorescence. The ultraviolet exam showed wide areas of later interventions, which were confirmed by X-ray fluorescence results. By infrared reflectography it was possible to observe under-drawings and some pentimenti. The X-ray fluorescence results identified inorganic pigments, common for that period of time: lead white, yellow, and red ochres, lead–tin yellow, vermilion, a green copper based pigment, azurite, smalt as De Vos’s basic blue pigment, umber, and an organic black pigment, probably bone black.     

Flexible RuII Schiff Base Complexes: G-Quadruplex DNA Binding and Photo-Induced Cancer Cell Death

A series of new Ru^II Schiff base complexes built on the salphen moiety has been prepared. This includes four flexible monometallic Ru^II compounds and six rigid bimetallic analogues that contain Ni^II, Pd^II or Pt^II cations into the salphen complexation site. Steady state luminescence titrations illustrated the capacity of the compounds to photoprobe G-quadruplex (G4) DNA. Moreover, the vast array of the Schiff base structural changes allowed to extensively assess the influence of the ligand surface, flexibility and charge on the interaction of the compounds with G4 DNA. This was achieved thanks to circular dichroism melting assays and bio-layer interferometry studies that pointed up high affinities along with good selectivities of Ru^II Schiff base complexes for G4 DNA. In cellulo studies were carried out with the most promising compounds. Cellular uptake with location of the compounds in the nucleus as well as in the nucleolus was observed. Cell viability experiments were performed with U2OS osteosarcoma cells in the dark and under light irradiation which allowed the measurements of IC₅₀ values and photoindexes. They showed the substantial role played by light irradiation in the activity of the drugs in addition to the low cytotoxicity of the molecules in the dark. Altogether, the reported results emphasize the promising properties of Ru^II Schiff base complexes as a new class of candidates for developing potential G4 DNA targeting diagnostic or therapeutic compounds.     

Study of two large-dimension Murillo's paintings by means of macro X-ray fluorescence imaging,point X-ray fluorescence analysis,and stratigraphic studies

During the recent restoration of two large-dimension paintings by Murillo, entitled “Miracle of the loaves and fishes” and “Moses and the water from the rock of Horeb,” several studies about the materials employed for their execution were carried out. Macro X-ray fluorescence scanning technique was performed on both works complemented by point X-ray fluorescence and stratigraphic analyses, in order to characterize the different components of the paintings (i.e., ground layer, pigments, and binders). The results allowed us to better elucidate Murillo painting technique and his creative process. Ground layer was prepared in the usual fashion of the artist, using earths, calcium carbonate, iron oxide pigments, and white lead. The polichromy is composed of lead white mixed with various pigments, depending on the colour tone to be obtained in the pictorial composition: Red and yellow ochres, vermilion, azurite, smalt, and lead-tin yellow were the main pigments identified during our study. Finally, the presence of previous conservation treatments was evidenced by detecting pigments (zinc white, Prussian blue, etc.) not coeval with the artist palette.     

Cell-specific and nuclear targeting with [M(CO)(3)](+) (M=(99m)Tc, Re)-based complexes conjugated to acridine orange and bombesin

Receptor-specific nuclear targeting requires trifunctional metal complexes. We have synthesized [M(L(2)-pept)(L(1)-acr)(CO)(3)] (pept=peptide; acr=acridine-based agent) in which the fac-[M(CO)(3)](+) moiety (1st function, M=(99m)Tc, Re) couples an acridine-based nuclear-targeting agent (2nd function, L(1)-acr) and the specific cell-receptor-binding peptide bombesin (3rd function, L(2)-pept). The metal-mediated coupling is based on the mixed ligand [2+1] principle. The nuclear targeting agents have been derivatised with an isocyanide group for monodentate (L(1)) and bombesin (BBN) with a bidentate ligand (L(2)) for complexation to fac-[M(CO)(3)](+). For nuclear uptake studies, the model complexes [Re(L(2))(L(1)-acr)(CO)(3)] (L(2)=pyridine-2-carboxylic acid and pyridine-2,4-dicarboxylic acid) were synthesized and structurally characterized. We selected acridine derivatives as nuclear-targeting agents, because they are very good nucleus-staining agents and exhibit strong fluorescence. Despite the bulky metal complexes attached to acridine, all [Re(L(2))(L(1)-acr)(CO)(3)] showed high accumulation in the nuclei of PC3 and B16F1 cells, as evidenced by fluorescence microscopy. For radiopharmaceutical purposes, the (99m)Tc analogues have been prepared and radioactivity distribution confirmed the fluorescence results. Coupling of BBN to L(2) gave the receptor-selective complexes [M(L(2)-BBN)(L(1)-acr)(CO)(3)]. Whereas no internalization was found with B16F1 cells, fluorescence microscopy on PC3 cells bearing the BBN receptor showed high and rapid uptake by receptor-mediated endocytosis into the cytoplasm, but not into the nucleus.     

Oligochitosan Synthesized by Cunninghamella elegans,a Fungus from Caatinga (The Brazilian Savanna) Is a Better Antioxidant than Animal Chitosan

Animal chitosan (Chit-A) is gaining more acceptance in daily activities. It is used in a range of products from food supplements for weight loss to even raw materials for producing nanoparticles and hydrogel drug carriers; however, it has low antioxidant activity. Fungal oligochitosan (OChit-F) was identified as a potential substitute for Chit-A. Cunninghamella elegans is a fungus found in the Brazilian savanna (Caatinga) that produces OligoChit-F, which is a relatively poorly studied compound. In this study, 4 kDa OChit-F with a 76% deacetylation degree was extracted from C. elegans. OChit-F showed antioxidant activity similar to that of Chit-A in only one in vitro test (copper chelation) but exhibited higher activity than that of Chit-A in three other tests (reducing power, hydroxyl radical scavenging, and iron chelation). These results indicate that OChit-F is a better antioxidant than Chit-A. In addition, Chit-A significantly increased the formation of calcium oxalate crystals in vitro, particularly those of the monohydrate (COM) type; however, OChit-F had no effect on this process in vitro. In summary, OChit-F had higher antioxidant activity than Chit-A and did not induce the formation of CaOx crystals. Thus, OChit-F can be used as a Chit-A substitute in applications affected by oxidative stress.     

Chromium (VI) ion adsorption features of chitosan film and its chitosan/zeolite conjugate 13X film

This research evaluated the importance of the adsorption properties of chitosan a chitosan/zeolite conjugate film for the removal of Cr(VI) ions from solutions in the 5-260 mg/L concentration range, when the pH was adjusted to 4.0 and 6.0. The uptake capacities of the films formed by chitosan and by the chitosan/zeolite conjugate were calculated by mass balance. The equilibrium isotherms were fitted to the Langmuir, Freundlich and Redlich-Peterson models. The chitosan film seems to be a good sorbent for Cr(VI) at pH 4, but its physical instability suggests the need for a more resilient support. Due to this fact zeolite was added to the chitosan matrix in solution and a chitosan/zeolite (CS/Zeo) film was thus formed. The solubility of the film and the characterization of the different matrices by FTIR, TGA and X-Ray showed that a cross-linked structure was formed between the chitosan and zeolite and the solubility of the film increased. In this study, the low manufacturing cost of the CS/Zeo matrix, the good uptake of Cr(VI) at acidic pH (17.28 mg/g) and the non desorption of Cr(VI) from the film in water suggests this combination should be tested in industrial environment.