Interaction Between DNA and Some Salicylic Acid Derivatives and Characterization of Their DNA Targets

A nanofiber polypyrrole (PPy) film was electrochemically deposited on a Pt electrode and used for immobilization of single‐stranded DNA (ssDNA) and investigation of hybridization events. Then, the interaction of DNA with four salicylic acid (SA) derivatives was studied with electrochemical methods. The oxidation peak of guanine was decreased by increasing the concentrations of salicylic acid derivatives. The binding constants of these compounds with four different sequences of DNA including different percentages of guanine‐cytosine and adenine‐thymine bases were calculated and it was clarified that sequences with higher percentage of adenine‐thymine bases have a higher binding constant in their interaction with SA derivatives.     

Determination of Hg(II) in Environmental Water Samples Using DLLME Method Prior to GC-FID

Mercury exists in two forms in environment, inorganic salts and organic compounds. Determination of mercury is very important, due to its health effects. In the present research, diphenylation of mercury using phenylboronic acid as a derivatization reagent was used for the determination of Hg(II) in real water samples. A simple, rapid and cheap method named dispersive liquid–liquid microextraction was used for the extraction of analyte under the following conditions: extraction solvent 16 μL of carbon tetrachloride, disperser solvent 1 mL of ethanol and sample volume 5 mL. Under the optimal conditions, the enrichment factor for diphenylmercury was 931 and the limit of detection calculated on the basis of five replicates was 0.004 μg mL^?1. The repeatability of the method expresses as relative standard deviation was 5.1 (n = 6). The linear range was between 0.01 and 10 μg mL^?1. The performance of the proposed technique was evaluated for the determination of mercury in different environmental water samples.     

99mTc-radiolabeled imidazo[2,1-b]benzothiazole derivatives as potential radiotracers for glioblastoma

This study presents [^99mTc]BPTG-1 and [^99mTc]BPTG-2 for glioblastoma imaging. In vitro cellular uptakes of these radiotracers were examined in SKOV-3, MCF-7, U87-MG, HT-29, and A549 cell lines. U87-MG cell line displayed the highest radiotracers uptakes. Biodistribution study in U87-MG tumor bearing mice revealed higher uptake of radiotracers in tumor than muscle and brain. Liver, intestine, and kidneys displayed the highest radioactivity uptakes. The main route of radiotracers elimination was hepatobiliary. Due to the brain uptake of these radiotracers, they are promising radiotracers for future studies in the diagnosis of glioblastoma.

     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Optimization of carrier-mediated three-phase hollow fiber microextraction combined with HPLC-UV for determination of propylthiouracil in biological samples

Carrier-mediated three-phase hollow fiber microextraction combined with high-performance liquid chromatography-ultra violet detection (HPLC-UV) was applied for the extraction and determination of propylthiouracil in biological samples. Propylthiouracil (PTU) was extracted from 7.5 mL of the basic solution (the source phase) with pH 12 into an organic phase (n-octanol containing 6% (w/v) of Aliquat 336 as the carrier) impregnated in the pores of a hollow fiber, and finally was back extracted into 24 μL of the acidic solution located inside the lumen of the hollow fiber (the receiving phase). The extraction was performed through the gradient of counter ion from the source to the receiving phase. The effects of different variables on the extraction efficiency were studied simultaneously using an experimental design. A half-fractional factorial design was employed for screening to determine the variables significantly affecting the extraction efficiency. Then, the factors with significant effect were optimized using a central composite design (CCD) and the response surface equations were developed. The optimal experimental conditions obtained from this statistical evaluation included: source phase, pH 12; temperature, 25 °C; extraction time, 40 min; counter ion concentration, 2 mol L⁻¹ of NaClO₄; organic solvent 6% of Aliquat in octanol and without salt addition in the source phase. Under the optimized conditions, the preconcentration factors were between 125 and 198 and also the limit of detections (LODs) ranged from 0.1 μg L⁻¹ to 0.4 μg L⁻¹ in different biological samples. The calibration curve was linear (r² = 0.998) in the concentration range of 0.5-1000 μg L⁻¹. Finally, the feasibility of the proposed method was successfully confirmed by extraction and determination of PTU in human plasma and urine as well as the bovine milk and meat samples in microgram per liter, and suitable results were obtained (RSDs < 6.3%).     

Synthesis, characterization, mechanochromism and photochromism of [Fe(dm4bt)3][FeCl4]2 and [Fe(dm4bt)3][FeBr4]2, along with the investigation of steric influence on spin state

The complexes [Fe(dm4bt)(3)][FeCl(4)](2) (1) and [Fe(dm4bt)(3)][FeBr(4)](2) (2) were prepared from the reaction of 2,2'-dimethyl-4,4'-bithiazole (dm4bt) with FeCl(3)·6H(2)O and FeBr(3), respectively, in methanol. Both complexes were characterized by IR, UV-Vis and (1)H NMR spectroscopy and their structures were studied by single-crystal diffraction. The methylated bithiazole led to high spin Fe(II) centers in the octahedral cation part of complexes 1 and 2 with Fe-N distance of 2.220 ?, in spite of the low spin octahedral Fe(II) complexes with unsubstituted bithiazole ligands. Crystal structure determination of 2 was performed at 90, 120 and 298 K. Temperature reduction to 90 K resulted in a decrease in the Fe-N bond length to 2.206 ? which is still in the range of high spin Fe(II). Complex 1 shows a reversible mechanochromic effect from the crystalline phase to powder form from red to yellow; it also displays reversible photochromism from yellow to green in solution under sunlight. The magnetic behaviour of the complexes was also studied at 2-300 K. The temperature dependence of χ(m)T curves for the two forms of 1, crystal and powder, demands some changes in their magnetic behavior, causing different colors i.e. red and yellow. At low temperatures, χ(m)T decreases where the decrease starts at around 65 K for compound 1, and at around 100 K for compound 2, due to different counterions. The two complexes exhibit antiferromagnetism at around 4 K.