排序方式: 共有14条查询结果,搜索用时 828 毫秒
1.
As part of the design and machining of the RFQ accelerator in the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University, the design process of the undercuts and dipole stabilizer rods is presented in this paper. In particular, the relationship between the inter-vane voltage slope and the local frequency of the undercut section is described quantitatively. With the identification of modes existing in the cavity, the specific parameters are optimized by the SUPERFISH and MAFIA codes. In addition, the water-cooling requirement of the dipole stabilizer rods is briefly discussed. 相似文献
2.
在以时间为自变量的PARMTEQ程序的基础上,添加了另一带相反电荷的束流进行动力学计算,同时考虑了正、负离子束加速的空间电荷效应和束团间的作用.并针对特定结构参数的RFQ加速器,给出了双束加速的动力学模拟过程和结果.模拟计算的目的在于研究正、负离子束在RFQ加速结构中同时加速所引起的动力学问题.结果表明,正、负离子束同时加速有助于克服径向空间电荷效应,但在流强较大时,双束加速时,将会在纵向出现明显的异性电荷之间的“捕捉”(trap)现象,从而导致纵向粒子损失数目的增加.因此,为实现双束加速,必须专门重新设计RFQ加速器,使其传输效率高于单束,才能体现出双束加速的优越性 相似文献
3.
束流在270°偏转磁铁系统输运过程中的损失计算 总被引:1,自引:0,他引:1
为计算医用加速器中束流经过270°偏转磁铁系统电子损失所造成的辐射剂量问题,将束流传输相应的计算公式和蒙特卡罗抽样方法相结合,在一阶近似条件下计算了电子在偏转系统中的输运过程,分析了不同初始条件对电子输运和电子损失的影响;模拟结果表明能散是产生电子损失的主要因素之一.计算得到了损失电子所处位置、能量和飞行方向等信息,把计算得到的信息作为蒙特卡罗程序的输入源,进一步计算出束流损失所产生的辐射剂量分布,从而能更完善地设计医用加速器照射头的屏蔽.文中给出在电子束初始半径为1mm、散角为5mrad、能散为10%条件下电子损失率为13.5%,损失电子主要是向加速器照射头部上方辐射出去. 相似文献
4.
5.
6.
The Compact Pulsed Hadron Source (CPHS) project is a university-based proton accelerator platform (13 MeV, 16 kW, 50 mA peak current, 0.5 ms pulse width at 50 Hz) for multi-disciplinary neutron and proton applications. The CPHS linac consists of a 3 MeV radio-frequency quadrupole (RFQ) linac and a 13 MeV drift tube linac (DTL). Both the RFQ and DTL share a 325 MHz, 2.1 MW klystron source. A single iris-type radio-frequency (RF) coupler is used to feed 537 kW of RF power to the RFQ cavity. Three-dimensional electromagnetic models of the ridge-loaded tapered waveguide (RLWG) and the coupler-cavity system are presented, and the design process and results of the RLWG and iris plate are described in detail. 相似文献
7.
8.
9.
为计算医用加速器中束流经过270°偏转磁铁系统电子损失所造成的辐射剂量问题, 将束流传输相应的计算公式和蒙特卡罗抽样方法相结合, 在一阶近似条件下计算了电子在偏转系统中的输运过程, 分析了不同初始条件对电子输运和电子损失的影响;模拟结果表明能散是产生电子损失的主要因素之一. 计算得到了损失电子所处位置、能量和飞行方向等信息, 把计算得到的信息作为蒙特卡罗程序的输入源, 进一步计算出束流损失所产生的辐射剂量分布, 从而能更完善地设计医用加速器照射头的屏蔽. 文中给出在电子束初始半径为1mm、散角为5mrad、能散为10%条件下电子损失率为13.5%, 损失电子主要是向加速器照射头部上方辐射出去. 相似文献
10.