不同成分比例CIGS薄膜及太阳电池的快速退火

研究了110~180 ℃（2 min）下的快速热退火对Cu(In,Ga)Se2(CIGS)薄膜特性及CIGS太阳电池性能的影响.结果表明：对于不同成分比例的CIGS（正常、富Cu、高Ga）电池来说,150 ℃,2 min的快速退火最利于电池性能及二极管特性的增加.其中,退火对富Cu电池的开路电压Voc改善最大,这是因为快速热退火对消除部分CIGS薄膜中的CuSex有积极作用,从薄膜的电阻率有少量提高,器件的短路电流Jsc有少量下降可以得到验证|而对于高Ga电池来说,填充因子FF的改善最大,这是因为高Ga样品的缺陷较多,退火会消除薄膜内部的部分缺陷,从而薄膜的迁移率及Jsc都有所提高,使得FF有较大的增加.     

Improvement in efficiency of solar cell by removing Cu2－xSe from CIGS film surface

CIGS thin films are deposited by sputtering and selenization. The synthesis of semiconducting polycrystalline thin films and characteristics of devices based on the CIGS absorbing layers are investigated. Their microstructures are characterized by x-ray diffraction and Raman spectroscopy. The results reveal that there exist metallic Cu_2-xSe compounds in CIGS film surfaces and the compounds are thought to be responsible for the degradation of the open circuit voltage of solar cells. The optimization of selenization temperature profile and copper content in the precursor surfaces is studied, concluding that the conversion efficiency may be improved by removing metallic Cu_2-xSe compounds from the surfaces of CIGS thin films.     

不同成分比例CIGS薄膜及太阳电池的快速退火

研究了110~180 ℃(2 min)下的快速热退火对Cu(In,Ga)Se2(CIGS)薄膜特性及CIGS太阳电池性能的影响.结果表明:对于不同成分比例的CIGS(正常、富Cu、高Ga)电池来说,150 ℃,2 min的快速退火最利于电池性能及二极管特性的增加.其中,退火对富Cu电池的开路电压Voc改善最大,这是因为快速热退火对消除部分CIGS薄膜中的CuSex有积极作用,从薄膜的电阻率有少量提高,器件的短路电流Jsc有少量下降可以得到验证;而对于高Ga电池来说,填充因子FF的改善最大,这是因为高Ga样品的缺陷较多,退火会消除薄膜内部的部分缺陷,从而薄膜的迁移率及Jsc都有所提高,使得FF有较大的增加.