A method based on diffraction theory for predicting 3D focusing performance of compound refractive X-ray lenses

A method based on the diffraction theory for estimating the three-dimensional (3D) focusing performance of the compound refractive X-ray lenses is presented in this paper. As a special application, the 3D X-ray intensity distribution near the focus is derived for a plano-concave compound refractive X-ray lens. Moreover, the computer codes are developed and some results of 3D focusing performance for a compound refractive X-ray lens with Si material are shown and discussed.     

A theoretical method based on Fourier spectrum analysis for the focusing performances of the X-ray compound refractive lenses

It is important to predict the intensity distribution in focusing plane for designing the X-ray compound refractive lenses. On the basis of analyzing the structure of X-ray compound lenses and comparing it with Praunhofer diffraction system, it is concluded that the X-ray focusing system can be regarded as a kind of Praunhofer diffraction system. Therefore, a method based on Fourier spectrum analysis is presented to predict the intensity distribution in the focusing plane for the X-ray lenses. A brief analysis on the relationship between the parameters of X-ray lenses and their focusing performance is also given in this paper.     

高速双边缘光纤光栅波长解调技术

提出一种双边缘结构对光纤光栅传感进行波长解调的方案,利用被测光谱通过不同光谱特性的滤波器时输出不同光强的比值确定被测光的波长.该系统在解调时不存在任何机械移动部分,比扫描式的解调方法测量速度更快,运行时更稳定、更精确.     

Design and fabrication of one-dimensional focusing X-ray compound lens with Al material

A method based on Fourier spectrum analysis for predicting the performances of the X-ray compound lenses is briefly introduced, the theoretical result obtained is the same as that of Fresnel-Kirchhoff approach. A kind of technique named moulding is developed for fabricating the one-dimensional (1D) compound X-ray lens with Al material and the fabrication process is presented. In addition, a two-time coating method is used to improve the numerical apertures of the compound lenses. Furthermore, the focusing performance of the Al compound X-ray lens under the high energy X-rays is measured.     

基于叠栅技术的二维亚波长周期结构成像设计

用光子学方法研究了叠栅技术中,当试件光栅被拉压和旋转后,叠栅条纹的空间周期和相对于基准光栅的取向,试件光栅被拉压后的节距等相关问题。根据衍射光波的空间周期可能大于试件光栅空间周期的特点,对二维亚波长周期结构衍射成像进行了设计研究。首先,对二维亚波长周期结构衍射物进行编码,以获得包含编码光栅空间信息的均匀波;其次,使编码得到的均匀波通过光学系统,并被放大到CCD相机所能辨识的大小;再次,经解码光栅解码,滤掉编码波,最终获得二维亚波长周期结构物的空间结构信息,达到超分辨的目的。同时,对成像过程进行了较为详尽的分析,对编码器、解码器的位置以及它们相对衍射物的取向进行了设计研究,对滤波器的选择给予了必要的说明,指出了取得超分辨成像的关键。     

Evolution of Shower Parton Distributions in a Jet from Quark Recombination Model

The evolution of shower parton distributions in a jet is investigated in the framework of a quark recombination model. The distributions are parameterized and the Q^2 dependence of the parameters is given by polynomials of In Q^2 for a wide range of Q^2     

高次伴随阵的特征值与特征向量

高次伴随阵的特征值与特征向量王秀玉，白静纯（吉林工学院基础部，长春１３００１２）本文主要讨论了ｎ＞２阶方阵Ａ的伴随矩阵Ａ的性质，以及Ａ的高次伴随矩阵的特征值与特征向量和Ａ之特征值与特征向量的关系。一、”Ａ的若干性质我们已知。”一（Ａ．；），ｄ，ｊ—１...     

多孔金属薄膜阻尼减振微观机理研究

研究了多孔金属薄膜的阻尼性能和微观机理. 采用分子动力学方法及扫描电镜(SEM) 原位观察实验手段对多孔金属薄膜阻尼进行研究, 得出金属薄膜应变滞后于应力周期性变化以及弹性势能周期性衰减的规律, 并通过应变滞后应力的时间差求得损耗因子; 从微观结构上可看出, 在薄膜孔缺陷附近\langle110angle晶向上经历了位错产生、 并且位错呈阶梯状向前发射的变化; 在SEM原位拉伸、卸载实验中观察到有微裂纹的萌生、斜向阶梯扩展、收缩及消失的周期过程. 结果表明: 在周期载荷作用下, 多孔金属薄膜的孔缺陷附近产生的位错可以挣脱开弱钉扎点并限制在强钉扎点上, 由于位错的变化及附近晶界间的相对滑动产生内摩擦, 消耗了系统的部分弹性势能, 引起金属薄膜的阻尼减振效应, 从而揭示了多孔金属涂层阻尼产生的微观机理.     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体.DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展.研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能.本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料...