宽带膜厚实时监控过程中膜层折射率的确定方法

为了准确计算出镀膜过程中每层膜的折射率，介绍了实时监控过程中确定膜层折射率的2种方法：一种是由实测的透射比光谱直接反算出膜层的折射率；另一种是用最小二乘法的优化算法实时拟合折射率。试验结果表明：在线反算适合单点监控，所得折射率误差小于2%。然而在实际镀膜过程中,由于宽带内膜层参数误差较大,一般大于25%。为此，采用最小二乘法拟合，即在整个宽光谱范围内采集每个波长点的信息，所得结果误差很小，一般都在2％～5%之间,有时可达到10%,在很大程度上提高了实际镀膜时膜厚监控的精度。     

《电子技术基础》课程教学的几点思考

《电子技术基础》是学好其他专业课程的基础,它研究电子元器件和电子电路在各种领域的应用,它的发展水平直接影响着各行各业的发展,因此,应帮助学生学好本课程．1联系实际激发学生学习的主动性兴趣是学习的动力,因此在学习之初就必须激发学生的学习兴趣,消除厌学畏难的心理．如在绪论课,给学生介绍日常生活息息相关的电子产品,如电视机、手机、DVD等,同时介绍电子技术在自动控制中的重要性,让学生了解其实用性,激发学习兴趣．再如,在     

Fast Optical Switching Using Oriented Cyanine Dye-Doped Nematic Liquid Crystal

A cyanine dye, 2-[7-（1,3-dihydro-1,3,3-trimethyl-2H-indol-2-ylidene）-1,3,5-heptatrienyl]-1,3,3-trimethyl-3H-indolium iodide （NK-125）, is doped in 4-cyano-4＇-pentylbiphenyl （5 CB）, and the mixture is sandwiched between two pieces of rubbed glass plates. The third-order nonlinear optical properties of the oriented NK-125-SCB layers are measured by the resonant femtosecond degenerate four-wave mixing （DFWM） technique at 760 nm. The third-order nonlinear optical susceptibility of one of the present samples is 5.5×10^-8 esu. The slow DFWM response of the NK-125-SCB layers due to a population grating is accelerated by the increasing laser power because of amplified spontaneous emission （ASE）. On the other hand, we do not observe a similar phenomenon for NK-125- polyethylene glycol （PEG-400）. Oriented NK-125 molecules in nematic liquid crystals must have very high ASE efficiency. Hence the population grating in a DFWM signal disappears within about 4 ps. It is expected that NK-125-SCB can be used as a material for very fast all-optical switching.     

倒置结构锥形束计算机层析的精确成像与Grangeat算法实现

研究了一种新的圆加垂直单弧段的锥顶轨迹的锥形束计算机层析（CT）的完全性条件和精确重建的Grangeat方法，提出了倒置结构锥形束计算机层析的便于实现的圆加垂直多弧段的成像结构及进行精确重建的完全性条件。利用倒置成像结构与现有成像结构之间的等价关系，给出了倒置结构锥形束计算机层析的重建算法。最后，对上述几方面进行了计算机模拟。     

奇偶相干态的Wehrl熵和Shannon熵

研究了奇、偶相干态的Ｗｅｈｒｌ熵和Ｓｈａｎｎｏｎ熵，结果表明，其Ｗｅｈｒｌ熵随总噪声的增加而增大，并趋向同一个常数。Ｓｈａｎｎｏｎ熵随力学量起伏的减小而减小，且这两种态的Ｓｈａｎｎｏｎ熵均可小于相干态的Ｓｈａｎｎｏｎ熵，但这时并不与压缩效应的出现相对应，因而Ｓｈａｎｎｏｎ熵不能成为压缩存在的判据。     

Anisotropy in Third-Order Nonlinear Optical Susceptibility of a Squarylium Dye in a Nematic Liquid Crystal

A squarylium dye is dissolved in 4-cyano-4＇-pentylbiphenyl （SCB） and oriented by sandwiching mixtures between two pieces of rubbed glass plates. The optical absorption spectra of the oriented squarylium dye-5CB layers exhibit high anisotropy. The third-order nonlinear optical responses and susceptibilities X^（3）e of squarylium dye in 5CB are measured with light polarizations parallel and perpendicular to the orientational direction by the resonant femtosecond degenerate four-wave mixing （DFWM） technique. Temporal profiles of the DFWM signal of the oriented squarylium dye-5CB layers with light polarizations parallel and perpendicular to the orientational direction are measured with a time resolution of 0.3ps （FWHM）, and are found to consist of two components, i.e., the coherent instantaneous nonlinear response and slow response due to the formation of excited molecules. A high anisotropic ratio of x^（3）e, 10.8 ：k 1.2, is observed for the oriented layers.     

Spurious Shell Closures in the Relativistic Mean Field Model

Following a previous systematic theoretical study of the ground-state properties of over 7000 nuclei from the proton drip line to the neutron drip line in the relativistic mean field model [Prog. Theor. Phys. 113 （2005） 785], which is in fair agreement with existing experimental data, we observe a few spurious shell closures, i.e. proton shell closures at Z = 58 and Z = 92. These spurious shell closures are found to persist in all the effective forces of the relativistic mean field model, e.g. TMA, NL3, PKDD and DD-ME2.     

动,静态硫化（NR＋SBR）／PE共混体系的结构与性能

用TEM研究了(NR SBR)/PE共混体系经动、静态硫化后的形态结构及其与力学性能的关系。未硫化和静态硫化体系的形态结构与其组成有关,均以含量大的组份为连续相;对动态硫化体系,当(NR=SBR)/PE<70/30时,均以PE为连续相,其性能主要依赖于构成连续相组份的性质。 动态硫化体系的T_g值低于静态体系,随PE组份含量的增加变化不大,而静态硫化体系的T_g值则随PE含量增加向高温方向迁移。用DSC测得动态硫化体系的结晶度比静态体系的大。前者的应力-应变性能也低于后者。     

石英晶体微天平技术研究纳米TiO_2表面Cu(Ⅱ)吸附与光化学还原过程

环境中排放的重金属离子Cu!对水生和陆生生物有强的毒害性。饮用水中Cu!的浓度高于1.0mg·L-1时,将会导致人畜得血色沉着病和胃肠粘膜病[1]。Cu!无法进行生物降解,除去废水中Cu!的常见方法有离子交换、置换、化学沉淀等[2],然而这些方法需要消耗大量的化学试剂,成本高。近来,研