Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

Optically active 2-p-tolylsulfinylacrylate a novel chiral dienophile which exhibits high reactivity and diastereoselectivity

The Diels-Alder reaction of a novel chiral dienophile, alkyl ($\text{S}$)-2-$\text{p}$-tolylsulfinylacrylates 1 with anthracene and cyclopentadiene showed high diastereoselectivity under the chelation controlled condition.     

Diastereoselective imino-aldol condensation of chiral 3-(p-Tolylsulfinyl)-2-furaldimine and ester enolates

(Ss)-3-(p-Tolylsufinyl)-2-furaldimine was synthesized, and condensation of the chiral furaldimine with lithium ester enolates has been examined. The product distribution of the reaction is dependent upon reaction conditions and on the kind of the substituent placed on the esters. Disubstituted ester enolate resulted in the exclusive formation of (4R)-beta-lactam, while unsubstituted, tert-butyl ester enolate preferentially gave (3R)-beta-amino ester. With the monosubstituted ester enolates, the condensation afforded (4R)-beta-lactams and/or (3R)-beta-amino esters as major products. This method has been applied to an efficient route to chiral furyl beta-lactams.     

High-pressure synthesis of cyclic phenylacetylene oligomer

New conjugated oligomers were prepared by reacting phenylacetylene under high pressure of 0.11 to 0.92 GPa at 100–200°C for 0–5 h. The number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the oligomer yield increased with pressure, tem-perature, and time. The average molecular weight of the oligomer showed the maximum value (M?_n: 830, M?_w: 2400) under 0.92 GPa, the maximum pressure, where phenylacetylene was oligomerized at a constant temperature. The structure of the oligomer was investigated from ESR, infrared, UV–VIS, field desorption mass (FDMS) spectra, and ¹³C NMR spec-trum. Analysis of the FDMS spectrum revealed that the molecular weight of the oligomer was multiple of the monomer. ¹³C NMR spectrum of the oligomer showed the absence of sp-carbon (? C?). We found that the oligomer had a cyclic structure. The cyclic oligomers of pentamer or more were new compounds. © 1995 John Wiley & Sons, Inc.     

Structures of xantholides A and B,two new guaianolides from xanthium canadense mill.

The structures of xantholides A and B were deduced on the basis of IR and NMR spectra, and confirmed by X-ray analysis. Xantholide A inhibited the larval growth of Drosophila melanogaster.     

Effect of suspended particles on spreading of volatile droplet on solid substrate

Abstract  

We have been interested in behaviors of suspended particles in a volatile droplet placed on a smooth substrate. It is known that the particles gather and deposit in the vicinity of the macroscopic contact line of the droplet, which is generally called ‘coffee stain problem’. A convective flow induced by non-uniform evaporation through the interface brings suspended particles toward the pinned contact line in the drying droplet, which forms a ring stain. We have focused on the dynamics of the droplet with/without suspended particles spreading on the solid substrate and on the behaviors of particles in the evaporating droplet. Spreading process of the droplet is significantly affected by the suspended particles. We indicate flow patterns in the droplet, in which the flow exhibits a modal structure with a mode number in the azimuthal direction, and indicate particles depositions after the dryout of the droplet. Three-dimensional particle tracking velocimetry is applied to reconstruct such unique flow patterns in the spreading process of the droplet. Resultant patterns of the particles depositing on the substrate are introduced.     

Thermodynamics and kinetics of hydrogen absorption–desorption of vanadium synthesized by aluminothermy

This paper studies the addition (0–40% w/w) of natural zeolite (NZ, 84% clinoptilolite) in blended cements made with Portland cement (PC) with low and medium C₃A content. The isothermal calorimetry was used to understand the effect of NZ on the early cement hydration. For low C₃A cement, the addition of NZ produces mainly a dilution effect and then the heat released curve is similar to plain cement with lower intensity. For medium C₃A cement, the curve shows the C₃S peak in advance and a high intensity of third peak attributed to C₃A hydration. The high cation fixed of NZ reduces the ions concentration (especially alkalis) in the mixing water stimulating the PC hydration. The flowability decreases when the NZ replacement level increases. Results of Fratini’s test show that NZ with both PCs used presents slow pozzolanic activity. At early age, XRD and FTIR analyses confirm that hydration products are the same as that of the corresponding PC and the CH is progressively reduced after 28 days and some AFm phases (hemi- and monocarboaluminate) appear depending on the NZ percentage and the PC used. For low replacement levels, the compressive strength is higher than the corresponding PC from 2 to 28 days. For high replacement levels, the early compressive strength is lower than that of corresponding plain PC and the pozzolanic reaction improves the later compressive strength of blended cements.