Scalable synthesis of multi-shelled hollow N-doped carbon nanosheet arrays with confined Co/CoP heterostructures from MOFs for pH-universal hydrogen evolution reaction

Developing low-cost but efficient hydrogen evolution reaction(HER)electrocatalysts over whole pH values is a significant but daunting task for the large-scale application of electrochemical hydrogen production.Herein,we develop,for the first time,a scalable MOF-assisted strategy for the fabrication and microstructural optimization of multi-shelled hollow N-doped carbon nanosheet arrays with confined Co/CoP heterostructures on carbon cloth(Co/CoP@NC/CC)for boosting HER performances.The key to this strategy is the step-by-step epitaxial growth of unprecedented multilayer ZIF-L arrays on carbon cloth,which are subsequently pyrolyzed and controllably phosphorized to achieve the precise control over the shell number and nanoarchitectures of the Co/CoP@NC/CC.Impressively,the HER performances can be significantly enhanced by increasing hollow shell number,and the optimal triple-shelled hollow Co/CoP@NC/CC exhibits low overpotentials of 86,78 and 145 mV in acidic,alkaline and neutral media to deliver a current density of 10 mA cm^-2,respectively,ranking as one of the best Co-based HER electrocatalysts over whole pH values.Further DFT calculations suggest that the Co/CoP heterostructures can effectively boost the cleavage of H–OH to generate protons and optimize the adsorption energy of hydrogen(ΔG_H*),which,together with the large electrode/electrolyte interface and accelerated charge/mass transfer of multi-shelled hollow array structure as well as the good conductivity and dispersity,are responsible for the remarkably improved HER performances.This study not only provides a new toolbox for enriching the family of multi-shelled nanoarchitecture materials,but also points out a general and effective route to develop highly efficient self-supported electrode materials for energy-related applications and beyond.     

光度法研究3,4,5—三羟基苯甲酸及其类似物与铀（Ⅵ）的配位反应

三羟基苯及其衍生物是一类重要配体,如3,4,5-三羟基苯甲酸(GA)与铀、钍及稀土生成沉淀,并可用于铀、钍、稀土的连续测定。我们在研究用GA离铀、钍、稀土时,GA与铀生成1种棕色配合物,早期曾用于铀的比色测定,它可能是一种单核与多核配合物的混合物,但对这类化合物与铀的配位反应迄今来作过详细研究。本文用光度法研究了GA、连苯三酚(PGA)、3,4,5-三羟基苯甲酸丙酯(PGE)与3,4,5-三甲氧基苯甲酸(TMBA)与铀(Ⅵ)的配位反应,研究了配合物的组成及其反应机理,测定了部分配合物的稳定常数。     

Yb3+:KY(WO4)2晶体生长与光谱性能

采用泡生法生长YbKYW晶体, 通过XRD分析确认所生长的晶体为β-YbKYW. TG-DTA测量结果表明, 晶体的熔点为1045 ℃, 相变温度为1010 ℃. 测得晶体红外光谱和拉曼光谱, 对其峰值所属振动的归属进行了指认, 并测量了晶体的吸收光谱和荧光光谱. 结果表明, YbKYW晶体在940, 980 nm附近有很强的吸收峰, 主峰980 nm处的吸收截面积为1.34×10-19 cm2;该晶体在990, 1010, 1030 nm附近都有较强的荧光发射峰, 其中最强发射峰1030 nm的发射线宽高达16 nm, 有望作为可调谐激光器的增益介质. 计算得其1030 nm受激发射截面积为3.1×10-20 cm2.     

基于近似解析法的超导储能磁体设计

降低超导储能磁体的研制成本一直是控制超导磁储能系统(Superconducting Magnetic Energy Storage, SMES) 总成本的重要手段之一. 本文考虑在一定磁体结构参数范围内, 磁体产生的最大磁场值可以采用级数进行 表示, 磁体的电感值可以采用线性函数表示, 给出了超导储能磁体磁场能量的近似解析表达式, 提出了一种基于近 似解析法的超导储能磁体设计方法. 该方法以储能磁体的线材用量最小作为设计目标, 在给定超导线材参数和临界电流特性曲线, 以及磁体储能总量要求的情况下, 依据此方法可快速的得到成本最优时所对应的磁体结构参数.将近似解析法优化和采用传统的有限元软件 Ansys 仿真优化进行对比分析, 结果表明采用近似解析法进行磁体优化更加方便快捷, 节省了大量计算时间.     

金属有机骨架基催化剂在加氢反应中的应用

加氢是现代化工产业中的一类主干反应,广泛应用于精细化学品、药物、食品、染料、功能聚合物及香料等制造产业中.高效催化剂的引入使得加氢反应能够在相对温和的条件下还原各类不饱和化合物.金属催化剂在加氢反应中活性高,所需的反应温度较低,适用性广,但是容易和S,N,As和P等元素结合而"中毒"失去反应活性.金属氧化物催化剂和金属硫化物催化剂具有一定的抗毒性,但活性相对较差,通常需要采用高温高压的反应条件,对催化剂本身和反应器的要求较为苛刻.传统催化剂在反应中具有一定的局限性,所以亟需开发新一代高效的加氢催化剂,在保证高活性和高选择性催化效果的同时,降低对能源的消耗和对环境的负面影响.金属有机骨架(MOFs)作为一种新型的多孔材料在过去二十年中受到相当大的关注,并在催化、气体存储和分离、传感器、发光材料和药物输送等众多领域的应用中表现出卓越的性能.利用MOF材料良好的相容性,将MOF和其它功能材料结合形成新的复合材料可以在更大程度上扩大MOF材料的应用领域.与传统的催化剂相比,MOF基材料具有优异的物理化学特性和结构可调性,通过合理的设计能够满足不同的催化加氢过程:(1)MOF基催化剂具有多样且特异性的活性位点.除了组成MOF材料的金属离子/簇和功能有机配体之外,MOF材料可通过封装其他活性物质或者被活性物质包裹等方式引入其他类型的催化位点,进一步扩大MOF基催化剂在不同催化加氢中的适应性.此外,不同的活性位点之间的协同作用又能特异性地促进反应的进行,对提高反应的选择性起到重要的作用.(2)活性位点的尺寸大小和空间分布可以被有效控制.这能影响到催化剂在催化反应过程中的活性和选择性,并且通过MOF材料的限域效应,同时能增强活性位点的稳定性和耐久性.(3)高比表面积能提高MOF基催化剂的催化活性.这种结构特性不仅可以增加MOF基催化剂的活性位点,而且能够吸附反应物和还原剂达到扩大其局部浓度的效果.(4)反应分子的扩散可通过调节MOF基催化剂的结构实现控制.通过调整MOF材料的孔窗口和通道的尺寸,能够改变反应物在催化剂内部的扩散途径,影响底物和活性位点的接触,能进一步影响反应的活性和选择性.本文总结了近几年来MOF基材料在不同的催化加氢反应中的应用,其中包括烯烃、炔烃、芳硝基化合物、肉桂醛、糠醛和苯等化合物的加氢反应.首先介绍了MOF基材料中不同类型的活性位点,除了MOF材料自身的金属离子/簇和功能有机配体外,MOF基复合材料中的金属纳米颗粒?金属硫化物?金属氧化物?均相催化剂等活性位点可以通过封装或包裹的方式引入.在不同加氢反应中,着重介绍了MOF基催化剂中不同类型活性位点的加氢过程中的催化方式、催化剂本身的结构优化及催化剂与反应底物之间的相互作用,以及这些因素之间的协同作用对反应活性和选择性的影响.最后,讨论了MOF基材料在加氢反应中应用存在的问题以及未来发展展望.     

Structure of B2O3 Glass at High Pressure: A 11B Solid-State NMR Study

We report spectroscopic evidence for the pressure-induced structural changes in B2O3 glass quenched from melts at pressures up to 6 GPa using solid-state NMR. While all borons are tri-coordinated at 1 atm, the fraction of tetra-coordinated boron increases with pressure, being about 5% and 27% in the B2O3 glass quenched from melts at 2 and 6 GPa, respectively. The fraction of boroxol ring species increases with pressure up to 2 GPa and apparently decreases with further compression up to 6 GPa. Two densification mechanisms are proposed to explain the variation of boron species with pressure.     

High accuracy time and space transform method for advection–diffusion equation in an unbounded domain

A new numerical method called high accuracy time and space transform method (TSTM) is introduced to solve the advection–diffusion equation in an unbounded domain. By a spatial transform, the advection–diffusion equation in the unbounded domain Rⁿ is converted to one on the bounded domain [?1, 1]ⁿ, and the Laplace transform is applied to eliminate time dependency. The consequent boundary value problem is solved by collocation on Chebyshev points. To face the well‐known computational challenge represented by the numerical inversion of the Laplace transform, Talbot's method is applied, consisting of numerically integrating the Bromwich integral on a special contour by means of trapezoidal or midpoint rules. Numerical experiments illustrate that TSTM has exponential rate in time and space. Copyright © 2008 John Wiley & Sons, Ltd.     

Shock-induced phase transitions in the MgO-FeO system to 200 GPa

We report new shock-compression data for single-crystal MgO at 114 and 192 GPa. Our data together with the existing shock-wave data revealed a volume discontinuity at 170±10 GPa along with the MgO Hugoniot. The discontinuity gives a volume increase of 1.9%, indicating a possible phase transition from a rock-salt structure (B1) to a high-temperature phase along with the MgO Hugoniot. We re-examined the Hugoniot data on polycrystalline sample (Mg_0.6, Fe_0.4)O up to 200 GPa [M.S. Vassiliou, T.J. Ahrens, The equation of state of Mg_0.6Fe_0.4O to 200 GPa, Geophys. Res. Lett. 9 (1982) 127-130], which showed similar discontinuity with a 2.2% volume increase at 135±10 GPa. Our results add to fundamental understandings of the behavior of MgO and the lower mantle mineral magnesiowüstite (Mg, Fe)O at ultrahigh pressure and temperature.