Resonant amplification of frustrated evanescent waves by single dielectric coating

Resonant amplification and enhancement of evanescent wave’s frustration across an optical barrier by using single dielectric coating is numerically demonstrated in this article. With further tuning of the thickness values of the second and the third medium (optical barrier) of the proposed stratified four-media configuration, it is shown that it may be possible to achieve unity transmittance at discrete, but closely spaced incident angles within the full range defined by the theoretical cut-off limit. The designed configuration may have other potential applications than lithography and waveguide design is one such example.     

Stoichiometry-Controlled Synthesis of Nanoparticulate Mixed-Metal Oxyhydroxide Oxygen Evolving Catalysts by Electrochemistry in Aqueous Nanodroplets

Mixed-metal oxyhydroxides—especially those of Ni and Fe—are one of the most active classes of materials known for catalyzing the oxygen evolution reaction (OER). Here, nanoparticulate mixed metal oxyhydroxides (of Ni, Fe, and Co) were prepared on an electrode surface by electrochemical reaction of a precursor solution encapsulated in aqueous nanodroplets (AnDs), with each of the droplets containing 10 s of attoliters of fluid. Electrode reactions and synthesis can be monitored in situ by electrochemistry as single AnD stochastically lands and interacts with the working electrode. Resultant metal oxyhydroxide nanoparticles can be size and composition controlled precisely by modulating the precursor solution stored in the AnD. Nanoparticulate metal oxyhydroxides were implemented as catalysts for the OER and exhibited superior catalysis compared to their thin-film counterparts, demonstrating a hundred-thousand-fold enhancement in atom efficiency at comparable turnover rates.     

Effects of electron beam irradiation on the photoelectrochemical properties of TiO2 film for DSSCs

TiO₂ has been widely utilized for various industrial applications such as photochemical cells, photocatalysts, and electrochromic devices. The crystallinity and morphology of TiO₂ films play a significant role in determining the overall efficiency of dye-sensitized solar cells (DSSCs). In this study, the preparation of nanostructured TiO₂ films by electron beam irradiation and their characterization were investigated for the application of DSSCs. TiO₂ films were exposed to 20–100 kGy of electron beam irradiation using 1.14 MeV energy acceleration with a 7.46 mA beam current and 10 kGy/pass dose rates. These samples were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and X-ray photoelectron spectroscopy (XPS) analysis. After irradiation, each TiO₂ film was tested as a DSSC. At low doses of electron beam irradiation (20 kGy), the energy conversion efficiency of the film was approximately 4.0% under illumination of simulated sunlight with AM 1.5 G (100 mW/cm²). We found that electron beam irradiation resulted in surface modification of the TiO₂ films, which could explain the observed increase in the conversion efficiency in irradiated versus non-irradiated films.     

Isolation of cellulose fibers from kenaf using electron beam

Cellulose fibers were isolated from a kenaf bast fiber using a electron beam irradiation (EBI) treatment. The methods of isolation were based on a hot water treatment after EBI and two-step bleaching processes. FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached cellulose fibers treated with various EBI doses decreased with increasing doses of EBI. Specifically, the lignin in the bleached cellulose fibers treated at 300 kGy, was almost completely removed. Moreover, XRD analyses showed that the bleached cellulose fibers treated at 300 kGy presented the highest crystallinity of all the samples treated with EBI. Finally, the morphology of the bleached fiber was characterized by SEM imagery, and the studies showed that the separated degree of bleached cellulose fibers treated with various EBI doses increased with an increase of EBI dose, and the bleached cellulose fibers obtained by EBI treatment at 300 kGy was separated more uniformly than the bleached cellulose fiber obtained by alkali cooking with non-irradiated kenaf fiber.     

Investigation of pupil-fill factors as process window indicators for dry optical lithography

This work presents two pupil-fill factors as process window indicators for optical projection lithography when resolution enhancement techniques are employed. The formulations of these two pupil-fill factors are based on two different concepts of the correlation between the process window and the diffraction orders captured at the pupil of the imaging lens. One pupil-fill factor considers the amplitude of the diffracted orders. The other pupil-fill factor considers the extent of overlap between the 0th and the 1st diffraction orders at the pupil. This work investigates how accurately the variation of the two pupil-fill factors indicates the influences of source configuration and mask features on the process window. The Chromeless Phase Shift Lithography (CPL™) technology, in the context of dry optical lithography, is used as a case study. The results suggest that the pupil-fill factor, which considers the amplitude of the diffraction spectrum, is a better process window indicator than the other.