Synthesis of Small‐Sized,Porous, and Low‐Toxic Magnetite Nanoparticles by Thin POSS Silica Coating

In this communication, we report the synthesis of small‐sized (<10 nm), water‐soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS‐coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51–53 emu g^?1) comparable to silica‐coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF‐7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.     

Stacking Gaussian processes to improve $$pK_a$$ p K a predictions in the SAMPL7 challenge

Journal of Computer-Aided Molecular Design - Accurate predictions of acid dissociation constants are essential to rational molecular design in the pharmaceutical industry and elsewhere. There has...     

Fluoroalkyl Radical Generation by Homolytic Bond Dissociation in Pentacarbonylmanganese Derivatives

Thermal decarbonylation of the acyl compounds [Mn(CO)₅(COR_F)] (R_F=CF₃, CHF₂, CH₂CF₃, CF₂CH₃) yielded the corresponding alkyl derivatives [Mn(CO)₅(R_F)], some of which have not been previously reported. The compounds were fully characterized by analytical and spectroscopic methods and by several single-crystal X-ray diffraction studies. The solution-phase IR characterization in the CO stretching region, with the assistance of DFT calculations, has allowed the assignment of several weak bands to vibrations of the [Mn(¹²CO)₄(eq-¹³CO)(R_F)] and [Mn(¹²CO)₄(ax-¹³CO)(R_F)] isotopomers and a ranking of the R_F donor power in the order CF₃<CHF₂<CH₂CF₃≈CF₂CH₃. The homolytic Mn−R_F bond cleavage in [Mn(CO)₅(R_F)] at various temperatures under saturation conditions with trapping of the generated R_F radicals by excess tris(trimethylsilyl)silane yielded activation parameters ΔH^≠ and ΔS^≠ that are believed to represent close estimates of the homolytic bond dissociation thermodynamic parameters. These values are in close agreement with those calculated in a recent DFT study (J. Organomet. Chem. 2018 , 864, 12–18). The ability of these complexes to undergo homolytic Mn−R_F bond cleavage was further demonstrated by the observation that [Mn(CO)₅(CF₃)] (the compound with the strongest Mn−R_F bond) initiated the radical polymerization of vinylidene fluoride (CH₂=CF₂) to produce poly(vinylidene fluoride) in good yields by either thermal (100 °C) or photochemical (UV or visible light) activation.     

Electron–hole complexes in self-assembled quantum dots in strong magnetic fields

We present results of calculations and experiments on electron–hole complexes in InGaAs/GaAs self-assembled quantum dots in high magnetic field (B). Due to hidden symmetries, the chemical potential of an N-exciton system at special B fields becomes insensitive to the exciton number as well as the magnetic field. This results in plateau regions of high intensity in measured magneto-PL spectrum. Theoretical calculations using exact diagonalization techniques successfully explain the measured magneto-photoluminescence spectrum with B fields up to 28 T.     

Synthesis of optically active 6-substituted 2-(aminomethyl)chromans

Three novel, optically active, 6-substituted 2-(aminomethyl)chromans were synthesized from readily available chroman 2-carboxylic acid precursors. These chroman-containing primary amines are useful building blocks for the synthesis of chroman-derived pharmaceutical agents.     

NMR investigation of concentrated alumina and silica slurries

The longitudinal relaxation times (T₁) of water in concentrated silica and alumina slurries were measured as a function of solids content. It was shown that the results could be fit very well with a two-phase fast-exchange model between free and surface-bound water. As expected, values of T₁ for bound water were in the order of 20–2000 times lower than that for free water, indicating a higher effective viscosity of the surface-bound water. The strength of the interaction depended on the particular surface, and all of the aluminas examined interacted more strongly with water than the two silicas studied, which themselves differed considerably. The chemical mechanical polishing (CMP) removal rate of tantalum by silica slurries was shown to be directly correlated with the interaction parameters, derived from the NMR relation times rather than with total surface hydroxyl group concentration.     

Gray code for derangements

We give a Gray code and constant average time generating algorithm for derangements, i.e., permutations with no fixed points. In our Gray code, each derangement is transformed into its successor either via one or two transpositions or a rotation of three elements. We generalize these results to permutations with number of fixed points bounded between two constants.     

Anionically Substituted 1,1′,1″‐Methylidynetris[1H‐pyrazole] Ligands for the Formation of Neutral Lanthanide Complexes in Water: Synthesis,Characterization, and Photophysical Properties

The six‐step synthesis of the new podand‐type ligand 6,6′,6″‐[methylidenetri(1H‐pyrazole‐1,3‐diyl)]tris[pyridine‐2‐carboxylic acid] (LH₃) is described. Reaction of LH₃ with LnCl₃ ?6 H₂O (Ln=Eu, Gd, Tb) in MeOH resulted in the isolation of [LnL]?HCl complexes characterized by elemental analysis, mass and IR spectroscopy. Photophysical studies of the Eu and Tb complexes in aqueous solutions revealed the characteristic luminescence features of the metal atoms, indicative of an efficient ligand‐to‐metal energy‐transfer process. Determination of the luminescence quantum yields in H₂O showed the Tb complex to be highly luminescent (?=15%), while, for the Eu complex, the quantum efficiency was only 2%. Excited‐state‐lifetime measurements in H₂O and D₂O evidenced the presence of ca. three H₂O molecules in the first coordination sphere of the complexes. Investigation of the Gd complex allowed the determination of the ligand‐centered triplet state and showed the ligand to be well suited for energy transfer to the metal. The luminescence properties of the complexes are described, and the properties of the ligand as a suitable complexation pocket is questioned.     

Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.