Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

Molecular orientation of azobenzene chromophores in ultrathin polymer nanosheets studied by attenuated total reflection spectroscopy

This paper describes characterization of molecular orientation for azobenzene moieties in a polymer nanosheet. Copolymers of N-[4-(phenylazo)phenyl] acrylamide (PAZoA) with tert-pentyl acrylamide (tPA) were synthesized and the monolayers deposited on tapered quartz waveguides by Langmuir–Blodgett (LB) technique. Spectroscopic properties of the copolymer (p(tPA/PAZoA)) monolayers were monitored by integrated optical waveguide technique on the molecular level. Molecular orientation of the azobenzene was precisely determined by polarized absorption spectra. It was found that the azobenzene groups took a horizontal orientation and distributed uniformly in the p(tPA/PAZoA) monolayer without significant PAZoA aggregation. Photoisomerization process from trans to cis form was also investigated. More than half of the trans form (60–70%) was photoisomerized under unpolarized light irradiation, and the photoisomerization rate was independent on the PAZoA contents. This implies that the microenvironment of PAZoA moieties was almost the same in three different p(tPA/PAZoA) monolayers.     

4‐(2‐Hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine and the 2‐(2,3‐dimethoxyphenyl)‐, 2‐(3,4‐dimethoxyphenyl)‐ and 2‐(2,5‐dimethoxyphenyl)‐substituted derivatives

The 1,5‐benzodiazepine ring system exhibits a puckered boat‐like conformation for all four title compounds [4‐(2‐hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₁H₁₈N₂O, (I), 2‐(2,3‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (II), 2‐(3,4‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (III), and 2‐(2,5‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (IV)]. The stereochemical correlation of the two C₆ aromatic groups with respect to the benzodiazepine ring system is pseudo‐equatorial–equatorial for compounds (I) (the phenyl group), (II) (the 2,3‐dimethoxyphenyl group) and (III) (the 3,4‐dimethoxyphenyl group), while for (IV) (the 2,5‐dimethoxyphenyl group) the system is pseudo‐axial–equatorial. An intramolecular hydrogen bond between the hydroxyl OH group and a benzodiazepine N atom is present for all four compounds and defines a six‐membered ring, whose geometry is constant across the series. Although the molecular structures are similar, the supramolecular packing is different; compounds (I) and (IV) form chains, while (II) forms dimeric units and (III) displays a layered structure. The packing seems to depend on at least two factors: (i) the nature of the atoms defining the hydrogen bond and (ii) the number of intermolecular interactions of the types O—H...O, N—H...O, N—H...π(arene) or C—H...π(arene).     

Controllable photopatterning and photochemical properties of novel copolymer containing dianthracene langmuir–blodgett films

A new series of copolymer poly(N‐hexadecylmeth acrylamide‐co‐bis(anthracen‐9‐ylmethyl) 2‐allylmalonate) [poly(HDMA‐co‐DAnMAMA)]s containing swallow‐tailed double anthracenyl groups and long alkyl group are designed and synthesized. The main route of the photochemical reaction of the p(HDMA‐DAnMAMA)copolymer Langmuir–Blodgett (LB) films is dimerization reaction between the anthracenyl groups under the irradiation of both 365 and 248 nm for limiting irradiation time, resulting to a fine negative‐tone pattern. On the other hand, the anthracenyl groups act just as photodecomposition group under 248 nm for longer irradiation time, resulting to a fine positive‐tone pattern. Consequently, positive‐tone and negative‐tone pattern are obtained by choosing not only a suitable irradiation light wavelength, but the irradiation time at 248 nm. Moreover, it is found that the exposed and unexposed regions of copolymer LB films irradiated at 248 nm have solubility differentiation in gold etchant (I₂/NH₄I/C₂H₅OH/H₂O), that is to say, the gold photopatterns with the maximal resolution of the used mask can be obtained easily without any development process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 139–147, 2012