Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Measurement of intense microwave field patterns using a neon glow indicator lamp

A novel method using small neon glow lamps with electrodes is developed for measuring intense microwave field patterns. When the lamp axis coincide with the electric field direction, the lamp discharge starts at the feeblest microwave electric field strength. Therefore, the lamp axis shows the field direction and the discharge starting indicates the field strength. The field strength for starting the microwave discharge is less than the strength for AC discharge, because of its low loss discharge mechanism. In the experiments using a microwave oven, it has been demonstrated again comparing with the simulated results that the method is able to use for measuring the intense electric field strength and direction.     

Time-resolved cavity ringdown spectroscopy on nanoparticle generation in a SiH4–H2 VHF plasma

Time-resolved cavity ringdown (τ-CRD) spectroscopy has been applied to monitor the silyl (SiH₃) radicals and nanoparticles in a pulsed very high frequency (VHF) silane-hydrogen plasma under microcrystalline silicon (μc-Si:H) deposition conditions. The measured cavity loss reveals four time intervals (I up to VI) in the first 4 s of the plasma pulse. By variation of the laser wavelength, it is demonstrated that the small cavity loss at 220 nm reflects the SiH₃ absorption in interval I. In intervals II and III, an additional cavity loss appears. This additional cavity loss corresponds to Rayleigh and Mie scattering by growing nanoparticles. Interval IV reflects the loss of nanoparticles between the electrodes during the afterglow of the plasma pulse. The evolution of the nanoparticle generation determined from the τ-CRD measurements are further confirmed by additional scanning electron microscopy analyses on the nanoparticles created in the plasma pulse.     

Microchannel-assisted thermal-lens spectrometry for microchip analysis

We present a new method for homocysteine quantitation in human plasma based on in-capillary reaction of homocysteine with 2,2′-dipyridyl disulfide. Homocysteine is in this so-called thiol-exchange reaction quantitatively transformed in mixed disulfide concomitantly with formation of an equimolar amount of 2-thiopyridone that is further separated by micellar electrokinetic chromatography and determined specifically at 343 nm. The concentration of homocysteine is thus estimated indirectly from the result of 2-thiopyridone determination. The linear detection range for concentration versus peak area for the assay was from 0.03–3 mM (correlation coefficient 0.994) with a detection limit of 6 μM and a limit of quantitation 20 μM. The inter-day reproducibility of the peak area and the migration time were 1.37% and 0.05%, respectively. The method is simple, relatively rapid and can be easily automated. Moreover the common capillary electrophoresis apparatus with a UV detector can be used to distinguish between normal and pathological hyperhomocysteinemia plasma samples.     

Magnesium-butadiene addition compounds: Isolation,structural analysis and chemical reactivity

The magnesium-butadiene 1 : 1 (1), 1 : 2 (II) and 1 : 3 addition compounds obtained by the direct metalation of butadiene with metallic magnesium were isolated. These compounds have a polymeric structure. Structural analysis of these compounds by NMR and IR methods was carried out. The process for the formation of II via I and III via II was investigated. The results of protolysis and alkylation of the above magnesium compounds corresponded well to those of crotylmagnesium compounds.     

Preparation of Polymer Particles Coated with Hydroxyapatite

Polymer particles coated with hydroxyapatite were prepared by treating Pd0 immobilized polystyrene-co-acrylic acid particles in aqueous CaCl2 and NaH2PO2 solutions. Hydroxyapatite coating took place at neutral to alkaline pH conditions, and the homogeneous growth of the hydroxyapatite layer on the surface of polymer particles was observed at relatively low temperature (30-50 degrees C). The thickness of the hydroxyapatite layer increased with reaction time. Copyright 1999 Academic Press.     

Synthesis and ion selectivity of macrocyclic metacyclophanes analogous to spherand-type calixarenes

Novel macrocyclic compounds, hexahydroxy[1.0.1.0.1.0]- (2b) and octahydroxy[1.0.1.0.1.0.1.0]metacyclophane (2c) have been prepared in 50–70% yield by base-catalyzed condensation of 5,5-di-tert-butyl-2,2-dihydroxybiphenyl (1) with formaldehyde in refluxing xylene. An attempted alkylation of the flexible macrocycles2b and2c with ethyl bromoacetate in the presence of Cs₂CO₃ under acetonitrile reflux gave only one pure stereoisomer3 and4, respectively, while other possible isomers were not observed. The structural characterization of these products is also discussed. The two-phase solvent extraction data indicated that hexaethyl ester3 and octaethyl ester4 show strong metal affinity, comparable with that of the corresponding calix[n]arenes, and a high K⁺ selectivity was observed for octaethyl ester4.¹H-NMR titration of hexaethyl ester3 and octaethyl ester4 with KSCN clearly demonstrate that a 11 complex is formed which is stable on the NMR time scale.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.