Dual Fluorometric Detection of Fe3+ and Hg2+ Ions in an Aqueous Medium Using Carbon Quantum Dots as a “Turn-off” Fluorescence Sensor

The present study aimed to develop a carbon dots-based fluorescence (FL) sensor that can detect more than one pollutant simultaneously in the same aqueous solution. The carbon dots-based FL sensor has been prepared by employing a facile hydrothermal method using citric acid and ethylenediamine as precursors. The as-synthesized CDs displayed excellent hydrophilicity, good photostability and blue fluorescence under UV light. They have been used as an efficient “turn-off” FL sensor for dual sensing of Fe³⁺ and Hg²⁺ ions in an aqueous medium with high sensitivity and selectivity through a static quenching mechanism. The lowest limit of detection (LOD) for Fe³⁺ and Hg²⁺ ions was found to be 0.406 µM and 0.934 µM, respectively over the concentration range of 0-50 µM. Therefore, the present work provides an effective strategy to monitor the concentration of Fe³⁺ and Hg²⁺ ions simultaneously in an aqueous medium using environment-friendly CDs.

Graphical Abstract

     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Extended Rees algebras and mixed multiplicities

Partially supported by the general research fund at the University of Kansas     

Deciding confluence of certain term rewriting systems in polynomial time

We present a characterization of confluence for term rewriting systems, which is then refined for special classes of rewriting systems. The refined characterization is used to obtain a polynomial time algorithm for deciding the confluence of ground term rewrite systems. The same approach also shows the decidability of confluence for shallow and linear term rewriting systems. The decision procedure has a polynomial time complexity under the assumption that the maximum arity of a function symbol in the signature is a constant.     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

Cyclic voltammetric studies of certain industrially potential iron chelate catalysts

 For the analysis of infrared spectroscopic bands and complex patterns partial cross correlation functions of a sample spectrum with reference spectra are calculated. The chosen ranges of the spectra are based on empirical knowledge of infrared spectrum structure correlations. The normalised maxima of the partial cross correlation functions are interpreted as fuzzy truth values and are combined by fuzzy logical operators. By application of that procedure larger common substructures will be derived from the reference spectra than by a maximum common substructure search based on the complete spectra. Received: 30 October 1996/Revised: 24 February 1997/Accepted: 26 February 1997     

Weak radiative decays of hyperons within theSU(6) broken quark-diquark model

In view of persisting discrepancy between experimental and theoretical results, specially in the weak radiative decays of∑ ⁺ andΞ ⁰, we analyse these decays within the framework of the QCD inspired quark-diquark model. On introducing a slightSU(6) breaking we obtainα(∑ ⁺→p+γ)≈?0.9 which is in excellent agreement with experimental value. Other decays are also improved in this scheme.     

An isothermal equation of state for solids

An isothermal equation of state (EOS) for solids, recently suggested by the authors in the realistic form, V/V₀=f(P), with relative volume as the dependent and the pressure as the independent variable, was shown to have an advantage for some close-packed materials in that it allows B′_∞=(∂B_s/∂P)_s(P→∞) to be fitted, and this is where the usual standard equations fail. In the present study, our EOS is applied to a number of inorganic as well as organic solids, including alloys, glasses, rubbers and plastics; varying widely in their bonding and structural characteristics, as well as in their bulk modulus values. A very good agreement is observed between the data and fits. The results obtained are compared with those from two well-known equations, expressible in the realistic form, proposed by Murnaghan and Luban. Further, the results are also compared with those from the widely used two- and three-parameter EOSs, expressible in the unrealistic form only, P=f(V/V₀), proposed by Birch—and also with those from the EOS model of Keane in which B′_∞ is explicitly expressed as an equation of state parameter. The results obtained from our model compare well to these EOSs. Our EOS, in general, yields the smallest mean-squared deviations between data and fits. The values of B′_∞calculated from our EOS are compared with those from Keane's model. Further, we have studied the variation of B′_∞with temperature using the experimental isotherms of Mo and W at 10 different temperatures ranging from 100 to 1000 K, and observed that the values of B′_∞ yielded by our model and that of Keane vary, as expected, within a narrow range. Furthermore, our EOS is applied to study the stability of the fit parameters with variation in the pressure ranges with reference to the isothermal compression data on Mo and W—and also to study the variation of isothermal bulk modulus with pressure, with reference to the ultrasonic data on NaCl and noted a very good agreement with experiment. In addition, our model is applied, with B₀ and B′₀ constrained to the theoretical values, to the five theoretical isotherms of MgO at 300, 500, 1000, 1500 and 2000 K obtained on the basis of a first principles approach—a good agreement is observed with the predictions, and the values of B′_∞ inferred at different temperatures tend to converge to a constant value.     

Flow-injection spectrophotometric determination of residual free chlorine and chloramine

2,4-Dinitrophenylhydrazine has been suggested as a new reagent for the flow-injection spectrophotometric determination of residual chlorine based on its oxidation to 2,4-dinitrophenyldiazonium ion. The measurement of the decrease in colour intensity under reversed flow-injection (reagent injection) conditions has been used for the determination of 0.1–10 mg/l Cl present as free or combined chlorine, and for its speciation. The limit of detection was 0.05 mg/l Cl. Copper (II), iron (III) and many other ions have been found not to vitiate the results.