Deuteron electromagnetic form factors and tensor polarization observables in the framework of the hard-wall AdS/QCD model

We study the electromagnetic form factors and tensor polarization observables of the deuteron in the framework of the hard-wall AdS/QCD model. We find a profile function for the bulk twist \begin{document}$\tau=6$\end{document} vector field, which describes the deuteron on the boundary and fix the infrared boundary cut-off of AdS space in accordance with the ground state mass of the deuteron. We obtain the deuteron charge monopole, quadrupole, and magnetic dipole form factors and tensor polarization observables from the bulk Lagrangians for the deuteron and photon field interactions. We plot the momentum transfer dependence of the form factors and tensor polarization observables and compare our numerical results with those in the soft-wall model and experimental data.     

Electrochemical Investigation of Activated Carbon Electrode Supercapacitors

Supercapacitors, also called as ultracapacitors, are electrochemical energy-storage devices that exploit the electrostatic interaction between high-surface-area nanoporous electrodes and electrolyte ions, combining properties of conventional batteries and conventional capacitors. A symmetrical activated carbon (AC) electrode supercapacitor has been fabricated in a simple and inexpensive manner. The AC has been synthesized from Charcoal, has activated in a furnace at high temperatures. The electrode was fabricated by casting slurry made of AC and blended in a polymer solution on the counter electrode (current collector), appeared to have high mechanical strength. The electrochemical performance of the prepared samples was tested in 1 M KCl solution by cyclic voltammetry (CV), galvanostatic charge discharge technique, and impedance spectroscopy. The surface and cross-section of electrode was observed with SEM. Capacitance of fabricated supercapacitor has a favorable capacitance in the range of 65–70 F/g with low resistance. The AC electrode supercapacitor has excellent electro chemical reversibility, good cycle stability with a low fading rate of specific capacitance even after 500 cycles, which is promising for energy storage applications.     

聚多巴胺功能化硅胶沉积单分散Pd纳米粒子的简易原位合成及用作醇需氧氧化反应的多相可循环使用的纳米催化剂（英文）

本文报道了一种不使用任何稳定剂或还原剂,原位合成硅胶/聚多巴胺复合物(SiO_2/PDA)负载的Pd纳米颗粒(Pd NPs)的简易方法.该方法先将PDA涂覆的SiO_2颗粒浸在Pd镀液中,然后利用PDA中含N基团的还原能力将Pd物种原位还原为纳米簇合物.并采用高分辨透射电镜、前场扫描电镜、能量散射谱、X射线衍射、X射线光电子能谱、诱导耦合等离子体和红外光谱等手段对所得纳米复合物的结构、形貌和物化性质进行了表征.被PDA基团锚合的Pd NPs具有显著的小颗粒(30–40 nm)特性.作为一个可循环使用的纳米催化剂,SiO_2/PDA/Pd NPs在醇的需氧氧化反应中表现出高活性.另外,催化剂经回收和多次重复使用时未出现明显的失活.     

Thiamine hydrochloride as a promoter for the efficient and green synthesis of 12-aryl-8,9,10,12 tetrahydrobenzoxanthene-11-one derivatives in aqueous micellar medium

An environmentally benign, three-component, one-pot integrated chemical process has been developed for the synthesis of 12-aryl-8,9,10,12-tetrahydrobenzoxanthene-11-one by nucleophilic addition reaction between aldehyde and β-naphthol followed by Michael addition of dimedone, catalyzed by thiamine hydrochloride in aqueous micellar medium with excellent yield. Simple reaction conditions, no requirement of chromatographic separation, short reaction time, ease of isolation, use of inexpensive, easily recoverable and reusable catalyst makes this protocol very interesting from an economic and environmental perspective.     

Cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction and HPLC–DAD analysis of ezetimibe and simvastatin in human plasma and urine

A new cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction (CA–HF–SLPME) followed by high‐performance liquid chromatography–diode array detection (HPLC–DAD) method was developed for simultaneous determination of ezetimibe and simvastatin in human plasma and urine samples. To prepare the CA–HF–SLPME device, the cetyl‐alcohol was immobilized into the pores of a 2.5 cm hollow fiber micro‐tube and the lumen of the micro‐tube was filled with 1‐octanol with the two ends sealed. Afterwards, the prepared device was introduced into 10 mL of the sample solution containing the analytes with agitation. Under optimized conditions, calibration curves plotted in spiked plasma and urine samples were linear in the ranges of 0.363–25/0.49–25 μg L^?1 for ezetimibe/simvastatin and 0.193–25/0.312–25 μg L^?1 for ezetimibe/simvastatin in plasma and urine samples, respectively. The limit of detection was 0.109/0.174 μg L^?1 for ezetimibe/simvastatin in plasma and 0.058/0.093 μg L^?1 for ezetimibe/simvastatin in urine. As a potential application, the proposed method was applied to determine the concentration of selected analytes in patient plasma and urine samples after medication and satisfactory results were achieved. In comparison with reference methods, the CA–HF–SLPME–HPLC–DAD method demonstrates considerable potential in the biopharmaceutical analysis of selected drugs.     

Novel compaction resistant and ductile nanocomposite nanofibrous microfiltration membranes

Despite promising filtration abilities, low mechanical properties of extraordinary porous electrospun nanofibrous membranes could be a major challenge in their industrial development. In addition, such kind of membranes are usually hydrophobic and non-wettable. To reinforce an electrospun nanofibrous membrane made of polyethersulfone (PES) mechanically and chemically (to improve wettability), zirconia nanoparticles as a novel nanofiller in membrane technology were added to the nanofibers. The compressive and tensile results obtained through nanoindentation and tensile tests, respectively, implied an optimum mechanical properties after incorporation of zirconia nanoparticles. Especially compaction resistance of the electrospun nanofibrous membranes improved significantly as long as no agglomeration of the nanoparticles occurred and the electrospun nanocomposite membranes showed a higher tensile properties without any brittleness i.e. a high ductility. Noteworthy, for the first time the compaction level was quantified through a nanoindentation test. In addition to obtaining a desired mechanical performance, the hydrophobicity declined. Combination of promising properties of optimum mechanical and surface chemical properties led to a considerably high water permeability also retention efficiency of the nanocomposite PES nanofibrous membranes. Such finding implies a longer life span and lower energy consumption for a water filtration process.     

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Sensing of Trace Amounts of Dodecyl Benzene Sulfonate by Solid Phase Spectrophotometry

A very simple, selective and sensitive spectrophotometric method for the determination of dodecyl benzene sulfonate (DBS) has been investigated. In this method, the ion pair of DBS and methylene blue was adsorbed onto plasticized poly(vinylchloride) membrane as a solid phase extraction medium. The absorbance of the blue membrane was measured at 660nm against a blank membrane using a spectrophotometer. The influence of type and amount of plasticizer, pH, concentration of methylene blue, temperature of sample solution and time of extraction on the absorbance of membrane was studied. Linear calibration was obtained over a concentration range of 0.1 to 6.5µgmL^–1 of DBS. The method was applied to the determination of DBS in different commercial detergents. The precision and accuracy of the method is comparable with the conventional standard method. This method is cost-effective, and the use of organic solvent such as chloroform is completely eliminated.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Refinement of etching techniques to reveal lamellar profiles in polyethylene banded spherulites

Permanganic reagents, developed for revealing semicrystalline morphology in olefin polymers under the electron microscope, have been modified by changing the water content to give the best resolution of detail in different polyethylene specimens. An optimum reagent is chosen to characterize a special feature of polyethylene spherulites, namely the S‐profile of dominant lamellae seen as growing towards the observer. This reagent consists of 1% weight of potassium permanganate in a mixture of 10 volumes concentrated sulphuric acid, 4 volumes of 85% orthophosphoric acid, and 1 volume of water. This study is set in the historical context of banded spherulite studies. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2279–2286, 1999