Bethe-Salpeter equation for non-self conjugate mesons in a power-law potential

We develop an approach to the solution of the spinless Bethe-Salpeter equation for the different-mass case. Although the calculations are developed for spinzero particles in any arbitratry spherically symmetric potential, the non-Coulombic effective power-law potential is used as a kernel to produce the spin-averaged bound states of the non-self-conjugate mesons. The analytical formulas are also applicable to the self-conjugate mesons in the equal-mass case. The flavor-independent case is investigated in this work. The calculations are carried out to the third-order correction of the energy series. Results are consistent with those obtained before.     

Bound States of the S-Wave Equation with Equal Scalar and Vector Standard Eckart Potential

A supersymmetric technique for the bound-state solutions of the s-wave Klein-Gordon equation with equal scalar and vector standard Eckart-type potential is proposed. Its exact solutions are obtained. Possible generalization of our approach is outlined.     

Construction of nonanuclear supramolecular structures from simple modular units

A porphyrazine based supramolecule with a nonanuclear structure has been prepared by the ready coordination of pyridine donor sites in octakis(4-pyridoxyethylthio)porphyrazinatomagnesium with vanadyl bis(acetylacetonate) and characterized by EPR spectroscopy.     

A facile gamma-ray method for radiodegradation of bilirubin in chloroform

Kinetics and concentration profile associated with the regulated radiodegradation of bilirubin in an organic solvent were assessed. The pure unconjugated specimen was prepared in chloroform (40.0 μM). The depletion of bilirubin was almost linear with dose, and complete degradation was accomplished with doses in excess of 100 Gy. The method was also evaluated for the explicit production of the long-wavelength isomer of biliverdin, which was characterized spectrometrically by an absorbance band in the region 600–650 nm. Results including differences in air, N₂ and O₂ purged samples are presented to identify the atmospheric medium for optimum production of biliverdin. The process was regulated by controlling the dose. The general rate constant of the depletion process was estimated at a dose rate of 5.67·10⁻²Gy·s⁻¹. The method is a convenient substitute for light illumination studies of bilirubin. This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

Polyurethane elastomers with hydrolytic and thermooxidative stability. II. Polyurethanes with n-alkylated polyurethane soft blocks

Block copolyurethanes with N-alkylated polyurethanes as nonself-associating soft segments are prepared. The polymers compare well in hydrolytic stability with block copoly(N-alkylamide urethane)s prepared in an earlier study but have better dimensional stability on exposure to moist heat. They show comparable hydrolytic stability and better oxidative stability than a poly(ether urethane) from the earlier study. The effect of different alkyl substituents on tensile properties and thermostability is studied. The tensile properties are also examined as a function of soft-segment molecular weight at constant weight-percent of hard-block. It is shown that yield stress and ultimate stress increase and elongations decrease as the soft-block M?_n increases. DSC measurements do not generally show well defined endotherms with few exceptions but dynamic mechanical testing of some samples does show transitions between 14 and 23°C.     

Pyrimidines,Part XXXI . Synthesis,reactions and properties of 6-acyl-1,3-dimethylpyrrolo[2,3-d]pyrimidine-2,4-diones

Acylations of 1,3-dimethyl- ( 1 ) and 1,3,7-trimethylpyrrolo[2,3-d]pyrimidine-2,4-dione ( 2 ) with anhydrides in the presence of trifluoroacetic acid proceed well to give in good yields the corresponding 7-acyl derivatives 3–11 . The 6-trichloroacetyl derivatives 5 and 6 are sensitive towards nucleophiles, which displace the trichloromethyl group easily by formation of the corresponding 6-carboxylic acid derivatives 12–23. The newly synthesized compounds have been characterized by elemental analysis, uv and ¹H nmr spectra and pK_a, determinations.     

Synthesis, structural characterization and electrochemical studies of new macrocyclic Schiff base containing pyridine head and its metal complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:13,14-tribenzo-9,12-dioksa-cyclopentadeca-1,5-diene was synthesized by reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by the template effect by the reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra, and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process, while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.