Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Action learning versus strategy learning

This article seeks to ascertain whether the strategy‐learning model of Hanaki, Sethi, Erev, and Peterhansl (2003) better accounts for observed behavior than do the various action‐learning models. It does so by measuring the goodness‐of‐fit of the models' predictions against published experimental results for such games as Coordination, Prisoner's Dilemma, and Chicken. The fit is measured via the mean squared deviation (MSD) between the observed behavior and the one predicted by the model. The results show that, for Chicken, the strategy‐learning model fits the observed data much better than do the action‐learning models. The best action‐learning model, on the other hand, fits the observed data well in Coordination. Overall, the strength of the strategy‐learning model is best shown in games where alternations between the two stage‐game Nash equilibria are often observed in the laboratory experiments. © 2004 Wiley Periodicals, Inc. Complexity 9: 41–50, 2004     

Endoscopic Observation of Tissue by Narrowband Illumination

We propose a new illumination method for a medical endoscope: narrow band imaging (NBI), in which the spectral bandwidth of the filtered light is narrowed. To confirm how the spectral specifications of the filtered light influence a reproduced image, an experiment was conducted observing the endoscopic images of the back mucosa of a human tongue. In addition, the effect of NBI on endoscopic images was investigated through preliminary clinical tests in colonoscopy and upper gastrointestinal endoscopy. It has been shown that NBI can enhance the capillary pattern and the crypt pattern on the mucosa. These patterns are useful features for diagnosing an early cancer.     

Synthesis and properties of tricyclo[6.4.1.0]trideca-1,3(6),7,9,11-pentaene

A new cyclobutene-fused 1,6-methano[10]annulene was synthesized by pyrolysis of the sulfone and sulfinate adducts of 3,4-bis(methylene)-1,6-methano[10]annulene and its physical and chemical properties were disclosed.     

Hydrogel‐like elastic membrane consisting of semi‐interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane

To obtain a hydrogel‐like elastic membrane, we prepared semi‐interpenetrating polymer networks (IPNs) by the radical polymerization of methacrylates such as 2‐methacryloyloxyethyl phosphorylcholine (MPC), 2‐hydroxyethylmethacrylate, and triethyleneglycol dimethacrylate diffused into segmented polyurethane (SPU) membranes swollen with a monomer mixture. The values of Young's modulus for the hydrated semi‐IPN membranes were less than that for an SPU membrane because of higher hydration, but they were much higher than that for a hydrated MPC polymer gel (non‐SPU). According to a thermal analysis, the MPC polymer influenced the segment association of SPU. The diffusion coefficient of 8‐anilino‐1‐naphthalenesulfonic acid sodium salt from the semi‐IPN membrane could be controlled with different MPC unit concentrations in the membrane, and it was about 7 × 10² times higher than that of the SPU membrane. Fibroblast cell adhesion on the semi‐IPN membrane was effectively reduced by the MPC units. We concluded that semi‐IPNs composed of the MPC polymer and SPU may be novel polymer materials possessing attractive mechanical, diffusive‐release, and nonbiofouling properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 68–75, 2003     

A facile non-oxidative method for synthesizing 1,3-disubstituted pyrroles from pyrrolidine and aldehydes

Reactions of pyrrolidine with 2 equiv of aldehydes without any catalyst in a pressurized vessel at 140–200 °C yielded 1,3-disubstituted pyrroles. -Branched aldehydes gave fairly good yields of the corresponding products by this method, which provides a facile non-oxidative procedure for synthesizing 1,3-dialkylpyrroles from inexpensive pyrrolidine and aldehydes.     

Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

(Triisopropylsilyl)acetaldehyde acetal as a novel protective group for 1,2-diols

(Triisopropylsilyl)acetaldehyde dimethyl acetal (TIPS-ADMA) was synthesized from chlorotriisopropylsilane in three steps. Cyclic and acyclic 1,2-diols can be transformed to (triisopropylsilyl)ethylidene acetals (TIPS-AA). Removal of the acetal by LiBF₄ regenerates the starting diol in excellent yield even in the presence of an acetonide of 1,2-diol. The TIPS-AA group can survive under the deprotection conditions of the acetonide in acetic acid at 80 °C. Selective protection of 2,3- and 4,6-diols for O-methyl d-mannoside with TIPS-ADMA and selective deprotection of the acetals have been achieved.