Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Metal components analysis of metallothionein-III in the brain sections of metallothionein-I and metallothionein-II null mice exposed to mercury vapor with HPLC/ICP-MS

Mercury vapor is effectively absorbed via inhalation and easily passes through the blood–brain barrier; therefore, mercury poisoning with primarily central nervous system symptoms occurs. Metallothionein (MT) is a cysteine-rich metal-binding protein and plays a protective role in heavy-metal poisoning and it is associated with the metabolism of trace elements. Two MT isoforms, MT-I and MT-II, are expressed coordinately in all mammalian tissues, whereas MT-III is a brain-specific member of the MT family. MT-III binds zinc and copper physiologically and is seemed to have important neurophysiological and neuromodulatory functions. The MT functions and metal components of MTs in the brain after mercury vapor exposure are of much interest; however, until now they have not been fully examined. In this study, the influences of the lack of MT-I and MT-II on mercury accumulation in the brain and the changes of zinc and copper concentrations and metal components of MTs were examined after mercury vapor exposure by using MT-I, II null mice and 129/Sv (wild-type) mice as experimental animals. MT-I, II null mice and wild-type mice were exposed to mercury vapor or an air stream for 2 h and were killed 24 h later. The brain was dissected into the cerebral cortex, the cerebellum, and the hippocampus. The concentrations of mercury in each brain section were determined by cold vapor atomic absorption spectrometry. The concentrations of mercury, copper, and zinc in each brain section were determined by inductively coupled plasma mass spectrometry (ICP-MS). The mercury accumulated in brains after mercury vapor exposure for MT-I, II null mice and wild-type mice. The mercury levels of MT-I, II null mice in each brain section were significantly higher than those of wild-type mice after mercury vapor exposure. A significant change of zinc concentrations with the following mercury vapor exposure for MT-I, II null mice was observed only in the cerebellum analyzed by two-way analysis of variance. As for zinc, the copper concentrations only changed significantly in the cerebellum. Metal components of metal-binding proteins of soluble fractions in the brain sections were analyzed by size-exclusion high-performance liquid chromatography (HPLC) connected with ICP-MS. From the results of HPLC/ICP-MS analyses, it was concluded that the mercury components of MT-III and high molecular weight metal-binding proteins in the cerebellum of MT-I, II null mice were much higher than those of wild-type mice. It was suggested that MT-III is associated with the storage of mercury in conditions lacking MT-I, and MT-II. It was also suggested that the physiological role of MT-III and some kind of high molecular weight proteins might be impaired by exposure to mercury vapor and lack of MT-I and MT-II.     

Electron spin resonance studies on radiation graft copolymerization in polyethylene. II. Grafting initiated by allyl radicals trapped in irradiated polyethylene

The regions trapping allyl radicals in irradiated polyethylene and the reactivity of the radicals with various monomers have been studied by electron spin resonance. Most of the allyl radicals are trapped in defects or surfaces of the crystallite, and only 10% of the radicals are trapped inside the crystallites. Since the reactivity of the allyl radicals depends on whether they come in contact with reactive monomers, the rate of reaction is related to the concentration of the monomers. When grafting reactions are initiated by allyl radicals, the rate of initiation is rapid and the rate of termination at the initial stage is also very fast. Consequently the yield of grafting increases at the initial stage but soon levels off, which is in contrast to the grafting behavior with alkyl radicals.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.     

Benzolactams. 4. Reaction of 3',4'- or 4',5'-dialkoxy-substituted 1-(2'-Bromobenzyl)-2-ethoxycarbonyl-1,2,3,4-tetrahydroisoquinolines with alkyllithium. 1,2 and 1,4 additions of alkyllithium to benzolactams

Treatment of 1-(2'-bromo-3',4'-dialkoxybenzyl)-1,2,3, 4-tetrahydroisoquinoline carbamates, 1a,c, with excess alkyllithium gave 8-oxoberbines, 2a,c, which were successively attacked in situ with another molecule of alkyllithium to give 1,2 and/or 1,4 addition products. A primary alkyllithium, such as MeLi or BuLi, gave a 1,2 addition product, 8-methyleneberbine 9a or 8-butylideneberbine 3a. t-BuLi preferred 1,4 addition, followed by elimination of the alkoxy group, to give 9-tert-butyl-8-oxoberbine 6a or 7c. s-BuLi gave a mixture of 1,2 and 1,4 addition products, 1-[2'-(2' '-methylbutyryl)benzyl]-1,2,3,4-tetrahydroisoquinoline 4a and 9-s-butyl-8-oxoberbine 5a. Similar treatments of carbamate 1b having no alkoxy group at its 3' position gave 1,2 addition products, 8-butylideneberbine 3b, 1-[2'-(2' '-methylbutyryl)benzyl]-1,2,3, 4-tetrahydroisoquinoline 4b, and 1-(2'-pivaloylbenzyl)-1,2,3, 4-tetrahydroisoquinoline 6b, in all cases. Reactions of 1a with s-BuMgCl and isoPrMgCl also gave the 1,4 adduct, 5a, and its 9-isoPr analogue, 12a. Treatment of 9a with excess NaBH(4) in AcOH gave (+/-)-coralydine (10b).     

Voltammetry at partially covered electrodes: Part I. Chronopotentiometry and chronoamperometry at model electrodes

Equations for chronopotentiometry and chronoamperometry at partially covered electrodes have been derived using a model of hexagonal array of cylidrical spaces terminated, at the electrode surface, by concentric active and inactive regions. The boundary value problem was shown to be analogous to that for a charge transfer preceded by a chemical reaction. Experiments with the reduction of ferricyanide on gold model electrodes partially covered with photoresist layer showed excellent agreement with the theory. Application of the equations to estimation of coverage and size of active sites distributed on a electrode surface is discussed.     

Aminyl radical cyclization by means of anodic oxidation. Stereoselective synthesis of cis-1-methyl-2,5-disubstituted pyrrolidines

Neutral aminyl radicals generated by anodic oxidation of lithium alkenylamides 2 undergo a stereoselective cyclization to give $\text{cis}$-1-methyl-2,5-disubstituted pyrrolidines 4. Their $\text{cis}$ stereochemistry was confirmed by a comparison with $\text{trans}$-1,2-dimethyl-5-phenylpyrrolidine, the structure of which was established by X-ray crystallographic analysis of its quarternary ammonium bromide 6.     

Convenient indole synthesis from 2-iodoanilines and terminal alkynes by the sequential Sonogashira reaction and the cyclization reaction promoted by tetrabutylammonium fluoride (TBAF)

The sequential Sonogashira reaction and the cyclization reaction of various 2-iodoanilines and terminal alkynes in the presence of a palladium catalyst and tetrabutylammonium fluoride (TBAF) gave the corresponding 2-substituted indoles in good yields.