Preparation, characterization and study of optical properties of ZnS nanophosphor

In this work the preparation, characterization and photoluminescence studies of pure and copper-doped ZnS nanophosphors are reported, which are prepared by using solid-state reaction technique at a temperature of 100 °C. The as-obtained samples were characterized by X-ray diffraction (XRD) and UV-VIS Reflectance spectroscopy. The XRD analysis confirms the formation of cubic phase of undoped as well as Cu²⁺-doped ZnS nanoparticles. Furthermore it shows that the average size of pure as well as copper-doped samples ranges from 15 to 50 nm. The room-temperature PL spectra of the undoped ZnS sample showed two main peaks centered at around 421 and 450 nm, which are the characteristic emissions of interstitial zinc and sulfur vacancies, respectively. The PL of the doped sample showed a broad-band emission spectrum centered at 465 nm accompanied with shoulders at around 425, 450 and 510 nm, which are the characteristic emission peaks of interstitial zinc, sulfur vacancies and Cu²⁺ ions, respectively. Our experimental results indicate that the PL spectrum confirms the presence of Cu²⁺ ions in the ZnS nanoparticles as expected.     

Influence of Cu and Mn impurities on thermally stimulated luminescence studies of MgSO4 compound

Thermally stimulated luminescence (TSL) of undoped and doped MgSO₄ with activators such as Cu and Mn has been investigated which are prepared by recrystallization method. The formations of undoped and doped MgSO₄ compounds are confirmed by XRD and FTIR studies. Photoluminescence studies have been undertaken to ensure the successful incorporation of Cu and Mn impurities in the MgSO₄ host lattice. Comparison of TL intensity of the most intensive glow peak of Cu and Mn doped MgSO₄ compounds with that of undoped MgSO₄ shows that addition of Cu and Mn impurity in MgSO₄ compound enhances the TL intensity by about 2.5 and 6 times respectively. The trap parameters namely order of kinetics (b), activation energy (E), frequency factor (s) and Balarin parameter (γ) associated with the most intensive glow peak of MgSO₄:Cu and MgSO₄:Mn phosphors were determined by using isothermal decay method and glow curve shape (Chen’s) method and these parameters are in good agreement.     

Catalysis by Amberlyst A-21: A Greener Approach to 4,5,6,7-Tetrahydro-1H-indazol-3(2H)-ones via Construction of Cyclohexanones

The 4,5,6,7-tetrahydro-1H-indazol-3(2H)-one derivatives have been synthesized in good yields via a two-step method in a single pot. The initial step involved the construction of cyclohexanone ring from aromatic aldehydes and β-ketoester in i-PrOH using an inexpensive and reusable catalyst (i.e., Amberlyst A-21) under mild reaction conditions. The utility of this catalyst has been demonstrated in synthesizing a range of cyclohexanone derivatives. The catalyst can be recovered and recycled, which makes this procedure simple, convenient, economically viable, and environmental friendly.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Thermally stimulated luminescence studies of undoped,Cu- and Mn-doped CaSO4 compounds

Thermally stimulated luminescence (TSL) of undoped and doped CaSO₄ with activators such as Cu and Mn has been investigated. The polycrystalline samples of undoped and doped CaSO₄ are prepared by the melting method. The formation of CaSO₄ compound is confirmed by X-ray diffraction and Fourier transform infrared studies. Scanning electron microscopic studies of CaSO₄ are also carried out.

The TSL glow curves of undoped CaSO₄, Cu- and Mn-doped CaSO₄ are studied. Comparison of the thermoluminescence (TL) intensity of the most intensive glow peak of Cu-doped CaSO₄ compound with that of undoped CaSO₄ shows that addition of Cu impurity in CaSO₄ compound enhances the TL intensity by about four times. However, the addition of Mn impurity to undoped CaSO₄ increases the TL intensity by about three times when compared with that of undoped CaSO₄. The TL-dose dependence of all three samples was studied and was observed to be almost linear in the studied range of irradiation time. Among the samples studied, namely undoped CaSO₄ and Cu- and Mn-doped CaSO₄, Cu-doped CaSO₄ is found to be the most sensitive. The trap parameters, namely order of kinetics (b), activation energy (E) and frequency factor (s) associated with the most intensive glow peaks of CaSO₄:Mn, CaSO₄:Cu and CaSO₄ phosphors were determined using the glow curve shape (Chen's) method.     

Characterization and photoluminescence studies of Eu<Superscript>2+</Superscript>-doped BaSO<Subscript>4</Subscript> phosphor prepared by the recrystallization method

Eu doped BaSO₄ was prepared by the recrystallization method and characterization of the material was done by using X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) techniques. From the XRD pattern of Eu doped BaSO₄ compound, it was found that the prominent phase formed was BaSO₄ and traces of other phases were very weak and the result of FTIR spectrum of BaSO₄:Eu shows that the sulfur-oxygen stretch was found at around 1100 cm⁻¹. The room-temperature PL spectra of the Eu doped BaSO₄ sample showed one peak centered at 374 nm, which is the characteristic emission of Eu²⁺ ion. This emission band at 374 nm corresponds to the 4f⁶ 5d→4f⁷ (⁸S_7/2) transitions of Eu²⁺ ions. The excitation spectrum taken at the wavelength 374 nm extends over a wide range of wavelengths from 220–350 nm with a strong peak at around 260 nm. Furthermore, the present sample shows good crystal quality and high photoluminescence sensitivity. Hence our results suggest possible potential applications of Eu doped BaSO₄ phosphor in optoelectronic devices.     

Total synthesis of halipeptins: isolation of halipeptin D and synthesis of oxazoline halipeptin analogues

The isolation from the marine sponge Leiosella cf. arenifibrosa and structural elucidation of halipeptin D (5), a relative of the previously isolated halipeptins A-C (1-3), is described along with the total synthesis of a number of oxazoline analogues (7 a-d and epi-7 c-d). The developed synthetic strategy provides a flexible entry into the various isomers of the polyketide domain of the halipeptins and improvises for a late stage construction of the oxazoline ring after a macrolactamization process which secures the required macrocycle.     

Pd/ligand-free synthesis of thienopyranones via Cu-catalyzed coupling-cyclization in PEG 400 under ultrasound

A greener and practical synthesis of 5-substituted thieno[2,3-c]pyran-7-ones has been achieved via Cu-catalyzed coupling-cyclization of 3-iodothiophene-2-carboxylic acid with terminal alkynes in the presence of K₂CO₃ in PEG 400 under ultrasound irradiation. A range of thienopyranone derivatives were synthesized by using this inexpensive and Pd- and ligand-free methodology.     

Multiple integral equations arising in the theory of water waves

A quick method of solution for multiple integral equations which are defined over a partition consisting of three intervals of the positive axis and whose kernel is the combination of trigonometric functions has been explained. The solution procedure can be extended to deal with similar integral equations defined over any finite partition of the positive axis. To represent the solution uniquely, certain solvability criteria are obtained in terms of the forcing functions involved. Limiting cases of dual integral equations over two disjoint intervals are discussed.