Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger

Journal of Thermal Analysis and Calorimetry - In recent decades, the growth of heat transfer using nanomaterials in the conventional base fluid has caught the attention of researchers...     

The effect of rapid rotation on a vertical bridgman furnace at large Rayleigh number

In quasi-steady operation, convection currents in a Bridgmandevice, used for producing a semi-conductor crystal, createinhomogeneities that may make the crystal unusable. It has oftenbeen suggested that additional forces due to rotation or magnetismmight be efficacious in reducing the segregation of the elementsof the alloy. It has been found that, over a wide range of rotationrates, there is no improvement in performance due to rotationabout the vertical axis. However, numerical results that havebeen obtained previously (Lee & Pearlstein, J. Crys. Growth240, 2002) indicate that, when effects of centrifugal buoyancyare introduced, a substantial reduction in segregation is achieved.In the work reported here, by contrast, in which we extend previouslarge-Rayleigh-number asymptotic analysis to include centrifugalbuoyancy, we find no improvement in radial segregation, butrather increasing segregation with increasing rotation rate.     

Separation and Determination of Nitroguanidine and Guanidine Nitrate by HPTLC

High-performance thin-layer chromatography has been used for separation and quantification of nitroguanidine and guanidine nitrate, for online and off-line quality control of synthesis. The compounds were separated on silica gel 60 F₂₅₄ layers with dioxane–tetrahydrofuran 1:1 (v/v), as mobile phase. UV detection was performed at 210 and 265 nm for guanidine nitrate and nitroguanidine, respectively. Quantitative analysis was performed by absorbance densitometry and use of peak area. Validation was performed taking into consideration the special features of the method.     

Spectrophotometric Study of Complexation of Tri-Aza Dibenzosulfide and Dibenzosulfoxide Macrocyclic Compounds with Heavy Metal Ions

The complexation reactions between 7,10,13-triaza-1-thia-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione ( TTD ) and 7,10,13-triaza-1-sulfoxo-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione ( TSD ) macrocycles with Ag⁺, Cd²⁺, Cu²⁺, Pb²⁺, Sr²⁺, Tl⁺, and Zn²⁺ ions have been studied in ethanol and methanol solutions at 25°C. The complexes formed between macrocycles ( TTD ) and ( TSD ) with these metals cations had a stiochiometry of 1:1 and 1:2, respectively. The stability constants of the resulting complexes were determined and found to decrease in the order Cu²⁺ > Zn²⁺ > Ag⁺ > Tl⁺ > Cd²⁺ > Pb²⁺ > Sr²⁺ with macrocycle ( TTD ) and Tl⁺ > Zn²⁺ > Cd²⁺ > Pb²⁺ > Cu²⁺ > Ag⁺ > Sr²⁺ with macrocycle ( TSD ).     

The Effects of Food on Cannabidiol Bioaccessibility

Cannabidiol (CBD) is a hydrophobic non-psychoactive compound with therapeutic characteristics. Animal and human studies have shown its poor oral bioavailability in vivo, and the impact of consuming lipid-soluble CBD with and without food on gut bioaccessibility has not been explored. The purpose of this research was to study the bioaccessibility of CBD after a three-phase upper digestion experiment with and without food, and to test lipase activity with different substrate concentrations. Our results showed that lipase enzyme activity and fatty acid absorption increased in the presence of bile salts, which may also contribute to an increase in CBD bioaccessibility. The food matrix used was a mixture of olive oil and baby food. Overall, the fed-state digestion revealed significantly higher micellarization efficiency for CBD (14.15 ± 0.6% for 10 mg and 22.67 ± 2.1% for 100 mg CBD ingested) than the fasted state digestion of CBD (0.65 ± 0.7% for 10 mg and 0.14 ± 0.1% for 100 mg CBD ingested). The increase in bioaccessibility of CBD with food could be explained by the fact that micelle formation from hydrolyzed lipids aid in bioaccessibility of hydrophobic molecules. In conclusion, the bioaccessibility of CBD depends on the food matrix and the presence of lipase and bile salts.     

The effect of target rotation rate on structural and morphological properties of thin garnet films fabricated by pulsed laser deposition

The effect of target rotation rate on the structural and morphological properties of pulsed laser deposition grown Bi:YIG garnets is investigated. The rotation rate dependence of the surface morphology and magnetic properties of the thin films were studied using atomic force microscopy combined with a magneto-optical measurement setup. The results show that decrease in the target rotation rate can also increase the roughness, the index of refraction, and the surface skewness and can decrease Faraday rotation by an order of magnitude.     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.     

Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal–chelate complex by the formation of bidentate ligand with Zn²⁺ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.     

Preparation and investigation of magnetic properties of wüstite nanoparticles

In this work wüstite nanoparticles have been prepared via high-energy ball milling, using high-purity hematite (Fe₂O₃) and iron (Fe) powders as the starting materials. In order to get a single-phase wüstite different mole ratios of (Fe/Fe₂O₃) were milled, using a planetary mill. X-ray diffraction studies of the as-milled powders show that a single-phase wüstite was formed for a mole ratio of 0.6. Lattice parameter of the wüstite was obtained from XRD data, by which a value of 0.072 was obtained for x in Fe_1−xO. A mean crystallite size of 13±1 nm was calculated for the single-phase wüstite, using Scherrer's formula. The morphology of the powders was also checked by TEM. Variations of pressure and temperature in the vial were recorded with respect to the milling time, using a GTM unit. Hysteresis loops of the as-milled powders at 5 K and room temperature have been obtained by SQUID and by VSM systems, respectively. The loops show non-zero coercivity, in contrast to the bulk wüstite. The observed magnetizations can be explained by a model based on the spinel-type defect clusters in non-stoichiometry wüstite.