Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Determination of the gamma self-attenuation correction factors using intensity ratios

Summary The possible correlation between the self-attenuation correction in gamma-spectrometric assay of uranyl nitrate samples and spectral line intensity ratios was investigated experimentally and simulated numerically using MCNP code. The characteristic gamma- and X-lines of uranium were measured using a low energy Ge gamma-spectrometer. The simulation results agreed with the experimental data and showed obvious correlation between the self-attenuation correction and the intensity ratios [(185.7 keV)/(143.8 keV), (98.44 keV)/(185.7 keV) and (185.7 keV)/(63.23 keV)]. This correlation greatly simplifies the determination of the self-attenuation correction and reduces the troublesome traditional procedures used to determine this coefficient.     

Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Metal-Assisted Oxidative Cyclization of Arylamidrazones I. Synthesis of 3-Acetyl-1,4-dihydro-1-phenyl-1,2,4-benzotriazine

In the presence of RuCl₃, N-phenylamidrazone underwent oxidative cyclization into 1,4-dihydro-1-phenyl-1,2,4-benzotriazine, the structure of which is established by spectral and X-ray diffraction data.     

Homolytic Cyclizations of N-Chloroalkenylamines

Many N-chloroalkylamines with double bond(s) dissociate homolytically to give chlorine atoms and aminyl radicals which undergo intramolecular cyclization reactions. Here, the nature of the aminyl radicals (neutral, protonated, or complexed to metal salts) appears to be important. The reactivity varies strongly from one species to another, and their selectivities can be different towards addition, substitution, abstraction, or dimerization reactions. A good synthetic tool appears to be the “complexed radical”, which is generated under mild conditions. A variety of β-functionalized, substituted, fused, or bridged azaheterocycles with alkaloid part structures thus become easily accessible in high yields, in a regio- and, possibly, stereoselective manner. Many examples are discussed illustrating the synthetic possibilities, limitations, and mechanistic features of this cyclization process.     

On estimating a density using Hellinger distance and some other strange facts

Résumé On s'intéresse ici aux possibles vitesses d'estimation d'une densité à support compact dans ^m sous des hypothèses de régularité, lorsque la perte est mesurée par le carré de la distance de Hellinger (on regardera aussi le cas connu des normes pour 1q2) et le risque est le risque minimax sur la famille. On donne une méthode générale permettant de traiter les problèmes dans le cadre de la théorie de l'approximation sous des conditions concernant l'entropie métrique et l' -capacité des familles à estimer. Les rapports entre régularité et entropie métrique étant bien connus, nous pourrons aussi traiter les cas classiques et d'autres qui le sont moins. Sous des conditions de bornes inférieures les vitesses sont celles observées pour la norme mais elles diffèrent dans le cas général. On montre aussi que les restrictions sur la compacité du support ou la régularité sont indispensables et que leur absence mène à l'impossibilité d'obtenir une estimation raisonnable en ce sens que n'importe quelle suite d'estimateurs sera arbitrairement mauvaise en un point au moins. Un résultat analogue est vrai sous des conditions de régularité.

---

---

This work was carried out during a visit of the author at the Mathematical Sciences Research Institute at Berkeley     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

High-performance liquid chromatography of ternary nickel dithiocarbamate complexes derived from some sympathomimetic drugs

Summary Nickel dithiocarbamate complexes derived from some sympathomimetic drugs are examined on silica Radial-Pak columns using binary solvents containing a small percentage of an organic polar modifier. Both the type and concentration of this modifier was found to influence the separation of the ternary from the parent binary complexes. When the two ligands in a ternary complex are racemic to each other, separation of the ternary complex is only possible when certain structural requirements of the molecule are fulfilled. Ternary complexes which contain structurally similar, but nonracemic ligands, are shown to be readily separated from binary complexes. When two such complexes differ only in that one of the ligands in one is enantiomeric to a ligand in the second complex, then it can be shown that the ternary complex with the (+) enantiomer ligand elutes faster from the silica column than the one with the (–) enantiomer ligand. An example of the use of ternary complexes for the identification of optical and structurally related impurities in pharmaceutical products is also given.     

Capto-dative Substituent Effects in Syntheses with Radicals and Radicophiles [New synthetic methods (32)]

The 100 yers old Wurster's salts have long been recognized as compounds with redical cations. Their unusual stabilization derives partly form capto-dative (cd) substitution. This principle is now discussed as one factor of radical stabilization and it is applied to simple methine derivatives. cd-Substitution has synthetically useful applications: cd-substituents on a carbon atom allow its selective dehydrodimerization. Olefines with geminal and thus cross-conjugated cd-substituents are “radicophilic” and permit twofold carbon radical addition. cd-Substituted olefines are useful antioxidants, polymerization inhibitors and are promising agents in the control of biological radical reactions. Generally, many reactions of cd-substituted molecules appear to involve radicals.     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.