Simultaneous spectrophotometric determination of Zinc(II) and Nickel(II) with 1-(2-pyridylazo)-2-naphthol

A new procedure for the simultaneous spectrophotometric determination of Zn(II) and Ni(II) with 1-(2-pyridylazo)-2-naphthol as chromogenic reagent has been developed. It is based on resolution of the mixed spectrum over the wavelength range 530–590 nm by applying a least-squares fitting program to standard spectra from each component. The spectra are recorded at an apparent pH of 5.0, provided by an acetate buffer in a mixed 6040 v/v 2-ethoxyethanol/water medium. The relative standard deviations for determination of 13.7 g of Ni and 31.0 g of Zn were 1.9 and 1.0%, respectively (8 replications). The method has been applied to the analysis of iron surfaces coated with a Zn-Ni alloy. The results are compared with those obtained by atomic-absorption spectrophotometry.     

Use of diode-array detectors for the simultaneous spectrophotometric determination of calcium and magnesium by flow injection

A method for the simultaneous flow injection spectrophotometric determination of calcium and magnesium with Arsenazo III based on the use of diode-array detector and merging zones is described. The method is applicable to the resolution of mixtures in which the chromogenic reagent has a high absorbance and its spectrum strongly overlaps those of its complexes. In resolving the mixtures, the excess reagent is considered as another component. Quantitation is based on the normal absorbance and first-derivative absorbance spectra. The method is applied to 0.2–1.5 μg ml^?1 Ca and 0.1–1.0 μg ml^?1 Mg. The analysis rate is 50 h^?1.     

Development and validation of a near infrared method for the analytical control of a pharmaceutical preparation in three steps of the manufacturing process

A near infrared diffuse reflectance spectroscopy (NIRS) procedure for the quantitative control analysis of the active compound (otilonium bromide) in a pharmaceutical preparation in three steps of the production process (blended product, cores and coated tablets) and a methodology for its validation are proposed. The analytical procedure is composed by two consecutive steps. First, the sample is identified by comparing its spectrum with a second derivative spectral library. If the sample is positively identified, the active compound is quantified by using a previously established partial least squares (PLS) calibration model. The procedure was validated by studying repeatability, intermediate precision, accuracy and linearity. To this end, an adaptation of ICH (International Conference on Harmonisation) validation methodology to an NIR multivariate calibration procedure is proposed. The relative standard error of prediction (RSEP) was < or = 1% and the suitability of the procedure for control analysis was confirmed by the results obtained analysing new production samples produced over a three-month period.     

Application of multicomponent spectrophotometry to analytical control of electroplating solutions

Summary A procedure for the simultaneous spectrophotometric determination of organic additives and the quantitation of Ni(II) in Zn-Ni electrolytic baths is described. Organic additives were determined by resolving the mixed spectrum over the wavelength range 278–330 nm by applying a least-squares fitting computational program to the standard spectrum of each component. Spectra were recorded on a hydroalcoholic medium (15% methanol) containing 0.1 mol/l NH₄Cl. The Ni(II) concentration was determined by applying the program to the first-derivative spectrum over the wavelength range 660–820 nm.     

Application of partial least-squares regression to the resolution of highly correlated spectra. Simultaneous spectrofluorimetric determination of Al(3+), Ga(3+) and In(3+)

The simultaneous spectrofluorimetric determination of mixtures of aluminium, gallium and indium as their 8-hydroxyquinoline complexes following extraction into chloroform is studied. The high collinearity of the spectra hindered their resolution by multiple linear regression (MLR) methodology; therefore, experimental data were processed by partial least-squares regression (PLSR) methodology. A previous step in the study of three-dimensional fluorescence spectrum is possible to select the best information to quantify this system with high collinearity. Finally the optimal conditions for quantitation, the best data preprocessing procedure and the most suitable spectral mode for calibration were established. Using an external set allowed the three analytes to be determined simultaineously at concentrations below 1 mug ml(-1) with errors less than 10% for aluminium and indium, and 15% for gallium.     

Kinetic spectrophotometric determination of hydrocortisone acetate in a pharmaceutical preparation by use of partial least-squares regression

A kinetic spectrophotometric method for the determination of hydrocortisone acetate based on its condensation with isonicotinic acid hydrazide is proposed. The method is applied to the determination of hydrocortisone acetate in a commercially available pharmaceutical preparation, presented as a pomade, that also contains another corticosteroid and additional active compounds. The operating procedure involves dissolving the pomade in chloroform and the addition of the reagent solution directly to the cuvette, in this way avoiding the previous extraction of analytes from the insoluble pomade matrix required by the alternative HPLC procedure. Calibration is performed by partial least-squares regression, using absorbance or first derivative spectra values recorded each minute during the first 30 min of reaction. Use of first derivative spectra overcomes possible scattered light problems produced by excipients precipitating, and produced slightly better results than absorbance data. The relative standard deviation obtained for 11 replicates analysed on different days was approx. 1.5%. The proposed method improves both accuracy and precision of the classical initial rate method and the precision of the HPLC procedure.     

Positive solutions for the p-Laplacian involving critical and supercritical nonlinearities with zeros

In this paper we show the existence of multiple solutions to a class of quasilinear elliptic equations when the continuous nonlinearity has a positive zero and it satisfies a p-linear condition only at zero. In particular, our approach allows us to consider superlinear, critical and supercritical nonlinearities.     

Simultaneous determination of metal ions. Catalytic oxidation of cobalt by metal ions when extracted with quinolin-8-ol

The catalytic effect of various ions on the aerial oxidation of Co(II) when extracted from weakly acidic solutions with quinolin-8-ol in chlorofom was studied. Oxidation is complete only in the presence of Fe(III) or V(V). Mixtures of Al(III), Cu(II), Fe(III) and Ni(II) with Co(II) at concentrations in the range 1–8 μg ml^?1 were analysed by using a multi-component analysis program involving first-order derivative spectra. Because of the metal ion interaction, a multivariate calibration process is required. The recovery factors achieved ranged from 93 to 111%.     

Positive solutions for an elliptic equation in an annulus with a superlinear nonlinearity with zeros

We study existence, multiplicity, and the behavior, with respect to λ, of positive radially symmetric solutions of in annular domains in . The nonlinear term has a superlinear local growth at infinity, is nonnegative, and satisfies for a suitable positive and concave function a. For this, we combine several methods such as the sub and supersolutions method, a priori estimates and degree theory.