木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

对位酚类衍生物作为化学发光分析的增强剂研究

在化学发光分析中，常常要用到碱性条件下鲁米诺与过氧化氢的反应系统，通过催化剂辣根过氧化物酶使反应顺利进行。如果再加入适当的增强剂，则灵敏度提高且发光时间延长，可改善测定的重现性。实验证明，对位酚类衍生物，如：对叔丁基苯酚，对甲苯酚的发光增强作用明显，其发光效率可上升几十倍，发光时间也获得有效延长。     

改进型磁绝缘线振荡器的设计和数值模拟

 综合两种现有磁绝缘线振荡器的优点，对器件进行改进，将双渐变结构、轭流片和阻抗渐变三种增大功率的机制综合考虑，利用二维半全电磁PIC程序进行数值模拟，设计了一种新的改进型磁绝缘线振荡器，当外加电压为550kV，电流为35kA左右时，在L波段获得了6GW的峰值输出功率。     

光学非球面二次曲面常数及顶点曲率的研究

受光学非球面制造过程中诸工艺参数的影响,能否保证非球面顶点曲率及二次曲面常数的精度是一个重要问题。基于二次曲面方程,推导出确定光学非球面二次曲面常数k以及顶点曲率半径r的一组算法,并在对一块口径为760mm×200mm标准非球面反射镜的实际测算中进行拟合,经过优化,拟合精度达到Δk=0.015,Δr=0.341mm,从而有效的控制了光学非球面制造过程中的顶点曲率及二次曲面常数的偏差。     

Banach空间二阶非线性脉冲微分-积分方程的极值解

通过建立一个新的比较定理研究了B anach空间二阶非线性混合型脉冲微分-积分方程初值问题的极值解,所得结果推广和改进了现有文献的主要结果.     

理想微裂纹系统中的随机扩展效应

本文讨论了在理想微裂纹系统中,由于微裂纹的随机性扩展,对微裂纹统计演化产生的效应。文中提供了一般的理论框架,给出了便于处理的转移概率的表达式。最后,用数值计算的例子展示了随机模型的统计演化特征,并比较了与确定性扩展模型下统计演化的异同。     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

磷酸三乙酯改性HZSM-5沸石的活性及理论研究

采用XRD表征了水蒸气和磷联合改性的HZSM-5沸石分子筛的结构．通过NH3-TPD和N2吸附脱附研究了样品的酸性和比表面．采用正庚烷的裂化反应研究了样品的裂化活性，研究结果表明，磷改性样品与母体样品相比，经过水蒸气处理后显示出较高的酸量和正庚烷裂化活性．上述结果首次用模型簇和计算量子化学方法进行了解释．采用Gaussian94软件包和PM3半经验量子化学方法对模型簇进行了全优化和频率分析．计算结果显示磷改性后样品的脱铝补硅反应热大于母体样品脱铝补硅反应热，从而显示出磷对骨架的稳定化作用．