木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

牛顿碰撞球的解释与分析

对牛顿碰撞球的常规碰撞形式和混合联珠单球碰撞形式做了理论分析和解释.在常规碰撞时,将悬线(钓鱼线)先悬挂小球一段时间后组装仪器,可克服悬线的拉力.在混合联珠单球碰撞时,根据理论分析,选取大球和小球的质量比为27∶8时,演示效果较好.     

理想微裂纹系统中的随机扩展效应

本文讨论了在理想微裂纹系统中,由于微裂纹的随机性扩展,对微裂纹统计演化产生的效应。文中提供了一般的理论框架,给出了便于处理的转移概率的表达式。最后,用数值计算的例子展示了随机模型的统计演化特征,并比较了与确定性扩展模型下统计演化的异同。     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

傅立叶变换红外光谱法对聚氯乙烯及邻苯二甲酸酯类增塑剂的快速鉴定

应用傅立叶变换红外光谱法实现了聚氯乙烯及邻苯二甲酸酯类增塑剂的快速鉴别。对聚氯乙烯的定性采用了衰减全反射技术,用锗作为晶体材料,对邻苯二甲酸酯类的定性则采用透射法。用溶解-沉淀法对试样进行分离和纯化,所用溶剂为四氢呋喃,沉淀剂为无水乙醇。经过此方法,聚合物与增塑剂达到很好的分离和纯化。     

龋病人牙釉质表面硬度及抗磨损性能测试

采用人工方法制成人牙釉质浅龋及使用抗龋措施的龋损釉质样本，分别测量各组釉质表面显微硬度，并以微动摩擦磨损试验机测试其抗磨性能，试验结果表明：各组实验组釉质较对照组表面硬度都有不同程度下降，氟化钠前处理会使釉质表达硬度显著下降，人工浅龋牙釉质的抗磨损性能不如正常釉质，使用两种抗龋措施对其抗磨性能没有明显改善。     

Solvent extraction of uranium(VI) with benzyloctadecyldimethylammonium chloride (BODMAC) from highly concentrated chloride solution

The ²²²Rn emanation fraction (EF) released from the technically enhanced naturally occurring radioactive material (TE-NORM) wastes at certain sites of petroleum and gas production was determined. The samples were analyzed by γ-ray spectrometry to determine the activity concentration of the ²²⁶Ra content, of which the ²²²Rn emanation fraction was calculated. The results showed that the ²²²Rn emanation fraction differs in the oil and gas production sites and it is independent of the activity concentration of ²²⁶Ra. This revised version was published online in August 2006 with corrections to the Cover Date.     

磷酸三乙酯改性HZSM-5沸石的活性及理论研究

采用XRD表征了水蒸气和磷联合改性的HZSM-5沸石分子筛的结构．通过NH3-TPD和N2吸附脱附研究了样品的酸性和比表面．采用正庚烷的裂化反应研究了样品的裂化活性，研究结果表明，磷改性样品与母体样品相比，经过水蒸气处理后显示出较高的酸量和正庚烷裂化活性．上述结果首次用模型簇和计算量子化学方法进行了解释．采用Gaussian94软件包和PM3半经验量子化学方法对模型簇进行了全优化和频率分析．计算结果显示磷改性后样品的脱铝补硅反应热大于母体样品脱铝补硅反应热，从而显示出磷对骨架的稳定化作用．