Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

A boundary element method for the calculation of noise barrier insertion loss in the presence of atmospheric turbulence

Atmospheric turbulence is an important factor that limits the amount of attenuation a barrier can provide in the outdoor environment. It is therefore important to develop a reliable method to predict its effect on barrier performance. The boundary element method (BEM) has been shown to be a very effective technique for predicting barrier insertion loss in the absence of turbulence. This paper develops a simple and efficient modification of the BEM formulation to predict the insertion loss of a barrier in the presence of atmospheric turbulence. The modification is based on two alternative methods: (1) random realisations of log-amplitude and phase fluctuations of boundary sources and (2) de-correlation of source coherence using the mutual coherence function (MCF). An investigation into the behaviours of these two methods is carried out and simplified forms of the methods developed. Some systematic differences between the predictions from the methods are found. When incorporated into the BEM formulation, the method of random realisations and the method of MCF de-correlation provide predictions that agree well with predictions by the parabolic equation method and by the scattering cross-section method on a variety of thin barrier configurations.     

Aspects of the transpiration model for aerofoil design

Transpiration is a technique in which extra non-physical normal flows are created on an aerofoil surface in order to form a new streamline pattern such that the surface streamlines no longer follow the aerofoil surface under inviscid flow. The transpiration model is an important technique adopted in aerofoil design either to avoid mesh regeneration when aerofoil profile co-ordinates are adjusted or to find shape corrections in inverse design methods. A first-order approximation (with respect to the normal streamline displacement) to the transpiration model is commonly adopted; it is shown that this can be a poor approximation especially in regions of high curvature. In this paper more accurate approximations are developed to address this problem and improve the accuracy.     

Multiparametric Evaluation of Dysphonic Severity

SUMMARY: In recent years, the multiparametric approach for evaluating perceptual rating of voice quality has been advocated. This study evaluates the accuracy of predicting perceived overall severity of voice quality with a minimal set of aerodynamic, voice range profile (phonetogram), and acoustic perturbation measures. One hundred and twelve dysphonic persons (93 women and 19 men) with laryngeal pathologies and 41 normal controls (35 women and six men) with normal voices participated in this study. Perceptual severity judgement was carried out by four listeners rating the G (overall grade) parameter of the GRBAS scale. The minimal set of instrumental measures was selected based on the ability of the measure to discriminate between dysphonic and normal voices, and to attain at least a moderate correlation with perceived overall severity. Results indicated that perceived overall severity was best described by maximum phonation time of sustained /a/, peak intraoral pressure of the consonant-vowel /pi/ strings production, voice range profile area, and acoustic jitter. Direct-entry discriminant function analysis revealed that these four voice measures in combination correctly predicted 67.3% of perceived overall severity levels.     

Detection of Anti-Ulcer Drugs and Their Metabolites in Horse Urine by Liquid Chromatography – Mass Spectrometry

This paper describes a convenient method for the extraction and detection of eight anti-ulcer drugs simultaneously in horse urine, a relatively complex and viscous matrix, using a single-step liquid-liquid extraction followed by high-performance liquid chromatography – mass spectrometry (LC-MS). Anti-ulcer drugs were isolated from horse urine by salting out and liquid-liquid extraction. Detection of these drugs at concentrations below 1 ng mL^?1 could be achieved using LC-MS-MS in the positive atmospheric pressure chemical ionisation (APCI) mode. The above analysis was also extended to elimination studies of horses administered with ranitidine and omeprazole. The urinary elimination data of these two drugs suggest that ranitidine was eliminated from horse urine at a much slower rate than omeprazole. In addition, three ranitidine metabolites and six omeprazole metabolites were identified for the first time in equine urine samples.     

Direct aziridination of alkenes by a cationic (salen)ruthenium(VI) nitrido complex

[RuVI(N)(salchda)(CH3OH)]PF6 (1) (salchda = N,N'-bis(salicylidene)o-cyclohexyldiamine dianion) reacts readily with 2,3-dimethyl-2-butene at room temperature in the presence of pyridine or 1-methylimidazole to give initially [RuIV(Az1(-H))(salchda)(py)]PF6 (2, Az1 = 2,2,3,3-tetramethylaziridine), which is then slowly reduced to [RuIII(Az1)(salchda)(py)]PF6 (3). 1 also reacts with a variety of aryl-substituted alkenes such as styrene and trans-beta-methylstyrene in the presence of py or 1-MeIm to give the corresponding ruthenium(III) aziridine complexes. The structures of 3 and [RuIII(Az2)(salchda)(1-MeIm)]PF6 (4, Az2 = trans-2-methyl-3-phenylaziridine) have been determined by X-ray crystallography. The Ru-N(aziridine) distances (2.1049, 2.097 A) are consistent with a neutral aziridine ligand. The C-C and C-N distances in the aziridine ligands are all indicative of single bonds.     

Designed helical peptides inhibit an intramembrane protease

gamma-Secretase cleaves the transmembrane domain of the amyloid precursor protein, a process implicated in the pathogenesis of Alzheimer's disease, and this enzyme is a founding member of an emerging class of intramembrane proteases. Modeling and mutagenesis suggest a helical conformation for the substrate transmembrane domain upon initial interaction with the protease. Moreover, biochemical evidence supports the presence of an initial docking site for substrate on gamma-secretase that is distinct from the active site, a property predicted to be generally true of intramembrane proteases. Here we show that short peptides designed to adopt a helical conformation in solution are inhibitors of gamma-secretase in both cells and enzyme preparations. Helical peptides with all d-amino acids are the most potent inhibitors and represent potential therapeutic leads. Subtle modifications that disrupt helicity also substantially reduce potency, suggesting that this conformation is critical for effective inhibition. Fluorescence lifetime imaging in intact cells demonstrates that helical peptides disrupt binding between substrate and protease, whereas an active site-directed inhibitor does not. These findings are consistent with helical peptides interacting with the initial substrate docking site of gamma-secretase, suggesting a general strategy for the development of potent and specific inhibitors of intramembrane proteases.     

The formylation of the upper-rims of thiacalixarenes: synthesis of the first tetra-formylated and the first meta-substituted thiacalix[4]arenes

The conventional Gross reaction for the formylation of the tetrapropoxythiacalix[4]arene using TiCl₄ affords the 18-(chloromethyl)-28-hydroxy-25,26,27-tripropoxythiacalix[4]arene substituted in the meta-position of the macrocycle. The p-tetraformyl-tetrapropoxythiacalix[4]arene, which is an interesting intermediate to the upper-rims functionalization of thiacalixarenes, was prepared with a very good yield using BuLi and N-formylpiperidine.     

qNMR for profiling the production of fungal secondary metabolites

Analysis of complex mixtures is a common challenge in natural products research. Quantitative nuclear magnetic resonance spectroscopy offers analysis of complex mixtures at early stages and with benefits that are orthogonal to more common methods of quantitation, including ultraviolet absorption spectroscopy and mass spectrometry. Several experiments were conducted to construct a methodology for use in analysis of extracts of fungal cultures. A broadly applicable method was sought for analysis of both pure and complex samples through use of an externally calibrated method. This method has the benefit of not contaminating valuable samples with the calibrant, and it passed scrutiny for line fitting and reproducibility. The method was implemented to measure the yield of griseofulvin and dechlorogriseofulvin from three fungal isolates. An isolate of Xylaria cubensis (coded MSX48662) was found to biosynthesize griseofulvin in the greatest yield, 149 ± 8 mg per fermentation, and was selected for further supply experiments. Copyright © 2016 John Wiley & Sons, Ltd.