Improved dust capture methods for crushing plant

The use of compressive crushing equipment such as gyratory crushers within minerals processing plants can potentially generate large quantities of dust. Remedies to this problem include the retrofitting of shrouds, enclosures, local exhaust ventilation (LEV) systems and water suppression systems. The single or combined application of these systems must be optimised to ensure they operate efficiently. It is desirable that the future design planning of such facilities include integrated dust suppression and/or removal systems to ensure material delivery rates are maintained and the welfare of the workforce is protected.     

Integral equation formulation for buoyancy-driven convection problems

An integral equation formulation for buoyancy-driven convection problems is developed and illustrated. Buoyancy-driven convection in a bounded cylindrical geometry with a free surface is studied for a range of aspect ratios and Nusselt numbers. The critical Rayleigh number, the nature of the cellular motion, and the heat transfer enhancement are computed using linear theory. Green's functions are used to convert the linear problem into linear Fredholm integral equations. Theorems are proved which establish the properties of the eigenvalues and eigenfunctions of the linear integral operator which appears in these equations.     

Pulsed KrF laser deposited GaN/TiN/Si(111) heterostructures by sequential TiN and liquid Ga laser ablation

GaN/TiN heterostructures were deposited on 4° miscut Si(111) substrates by pulsed KrF laser ablation of TiN through vacuum, followed by reactive pulsed KrF laser ablation of liquid Ga through 70-75 mTorr of microwave-activated NH₃. Deposition temperatures of 950 °C and 1050 °C were employed for the TiN layer while 900 °C was employed for the GaN layer. The targets were positioned 5 cm from the substrate and ablated by using a reimaging beamline at a nominal energy density of 3-4 J/cm². X-ray diffraction (XRD) revealed a highly textured heterostructure with GaN(0001)//TiN(111)//Si(111) and with a rocking curve width for both GaN(0001) and TiN(111) equal to ~1.1°. The mosaic spread through the TiN(001) reflection was ~1.3°, whereas that of the GaN(101_1) was undetectable because of low S/N. Scanning electron microscopy revealed large oriented 10 7m-sized hexagonal crystallites decorating large depressions in the TiN film with many smaller pits also present. The effect of substrate processing and TiN film processing on pit formation was explored.     

Self-organized silicon microcolumn arrays generated by pulsed laser irradiation

Cumulative nanosecond pulsed excimer laser irradiation of silicon produces an array of high-aspect-ratio microcolumns that protrude well above the initial surface. The growth of these microcolumns is strongly affected by the gas environment, being enhanced in air or in other oxygen-containing atmosphere. An array of very large and complex conical structures that also protrude above the surface is formed if the irradiation is performed in sulfur hexafluoride (SF₆). Kinetics studies of microcolumn growth show that: (i) A certain number of pulses is required to initiate growth of microcolumns; (ii) column nucleation is inhomogeneous, taking place always at the edges of deep grooves or pits; (iii) growth is fast with the earlier pulses but slows down to a halt when the columns reach a certain length. These studies show that columns nucleate and grow by continuous influx of silicon with each laser pulse. It is proposed that the axial growth of microcolumns and cones is due to the deposition of atoms or clusters at their tips. The column/cone tips are melted during irradiation and act as preferred sites for deposition, resulting in a very high axial growth rate. The contribution of etching and ablation to the flux of silicon-rich vapor produced during irradiation is discussed. The mechanism of columnar growth is compared with the vapor-liquid-solid method to grow silicon whiskers.     

Permanently oriented antibody immobilization for digoxin determination with a flow-through fluoroimmunosensor

This paper reports a new flow-through fluoroimmunosensor, the function of which is based on antibodies immobilized on an inmunoreactor of controlled-pore glass (CPG), for determination of digoxin, used in the treatment of congestive heart failure and artery disease. The immunosensor has a detection limit of 1.20 microg L(-1) and provides high reproducibility (RSD=4.5% for a concentration of 0.0025 mg L(-1), and RSD=6.7% for 0.01 mg L(-1)). The optimum working concentration range was found to be 1.2 x 10(-3)-4.0 x 10(-2) mg L(-1). The lifetime of the immunosensor was about 50 immunoassays; if stored unused its lifetime can be extended to three months. A sample speed of about 10-12 samples per hour can be attained. Possible interference from substances with structures similar to digoxin (morphine, heroin, tebaine, codeine, pentazocine and narcotine) was investigated. No cross-reactivity was seen at the highest digoxin: interferent ratio studied (1:100). The proposed fluoroimmunosensor was successfully used to determine digoxin concentrations in human serum samples.