种植沙生植物--沙棘改善内蒙古地区生态环境

结合内蒙古地区现状，对沙棘的生物学和生态学特性、沙棘属植物化学成分和微量元素及种植沙生植物——沙棘的重要性和必要性进行了详细的研究和探讨。研究表明，沙棘属植物具有极强的生态适应性并富含多种营养成分和生物活性物质，并以耐干旱、耐瘠薄、萌蘖及固氮能力强等特点被称为治理非宜林地水土流失、改善生态环境的先锋树种。种植沙棘是治理内蒙古脆弱生态环境最经济、最有效的措施，是贫瘠的不毛之地发展经济、增加收入的经济树种。另外．种植沙棘的技术简便，容易掌握，投资少，见效快。     

内蒙古地区天然植物沙棘果中黄色素的提取工艺及性质研究

以内蒙古地区沙棘果实为原料，研究了提取黄色素的工艺条件，同时对该色素的性质进行了初步探讨。结果表明，以95％的乙醇溶液作浸提剂，提取的黄色素浓度最高，工艺流程简单易行，且无毒，无污染。对提取的黄色素进行的性质试验表明，沙棘黄色素对光、热具有较好的稳定性，适用于酸性或弱碱性的食品中，葡萄糖、氧化剂(H2O2)、还原剂(Na2SO3)等食品添加剂均无明显影响以上结果为这种优良天然色素的开发与应用提供了参考。     

Immobilization and electrochemical redox behavior of cytochrome c on fullerene film-modified electrodes

Two different fullerene film-modified electrodes were prepared and used for surface immobilization and electrochemical property investigation of horse heart cytochrome c (cyt c). Both a pristine fullerene film and fullerene-palladium (C(60)-Pd) polymer film-modified platinum, glassy carbon and indium-tin-oxide (ITO) electrodes were used. The immobilized cyt c was characterized by piezoelectric microgravimetry at a quartz crystal microbalance (QCM), UV-visible absorption, and X-ray photoelectron spectroscopy (XPS), as well as cyclic voltammetry (CV) techniques. The UV-visible spectral studies revealed a small blue shift of both the Soret and Q band of the heme moiety of cyt c, immobilized on the C(60)-Pd polymer film-modified ITO electrode, as compared to the bands of cyt c in solution suggesting that molecules of cyt c are densely packed onto the surface of the modified electrode. The CV studies revealed a quasi-reversible electrode behavior of the heme moiety indicating the occurrence of kinetically hindered electron transfer. A good agreement was found between the values of cyt c electrode surface coverage determined by piezoelectric microgravimetry and cyclic voltammetry. For piezoelectric microgravimetry, these values ranged from 0.5 x 10(-10) to 2.5 x 10(-10) mol cm(-2), depending upon the amount of cyt c present in solution and the time allowed for immobilization, which compared with a value of 3.6+/-0.4 x 10(-10) mol cm(-2) determined by CV. The possible mechanisms of cyt c immobilization on the C(60) film and C(60)-Pd film-modified electrodes are also discussed.     

Solid-Phase Synthesis of a Monofunctional trans-a(2)Pt(II) Complex Tethered to a Single-Stranded Oligonucleotide

Cross-linking ability is possible with the oligonucleotide-tethered, monofunctional trans-Pt(II) complex shown. It was synthesized by a novel solid-phase approach comprising conjugation of immobilized tetrathymidylic acid with a trans-a(2)Pt(II) building unit, ammonolysis, and transformation of the resulting complex (R=1-N-cyclohexylmethylthyminate) into the chloro derivative (R=Cl). a=NH(2)CH(3), T=thymine.     

Femtosecond dynamics of the ring closing process of diarylethene: a case study of electrocyclic reactions in photochromic single crystals

The cyclization reaction of the photochromic diarylethene derivative 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)perfluorocyclopentene was studied in its single crystal phase with femtosecond transient absorption spectroscopy. The transient absorption measurements were performed with a robust acquisition scheme that explicitly exploits the photoreversibility of the molecular system and monitors the reversibility conditions. The crystalline system demonstrated 3 × 10(4) repeatable cycles before significant degradation was observed. Immediately following photoexcitation, the excited state absorption associated with the open-ring conformation undergoes a large spectral shift with a time constant of approximately 200 fs. Following this evolution on the excited state potential energy surface, the ring closure occurs with a time constant of 5.3 ps, which is significantly slower than previously reported measurements for similar derivatives in the solution phase. Time resolved electron diffraction studies were used to further demonstrate the assignment of the transient absorption dynamics to the ring closing reaction. The mechanistic details of the ring closing are discussed in the context of prior computational work along with a vibrational mode analysis using density functional theory to give some insight into the primary motions involved in the ring closing reaction.     

Facility location models for planning a transatlantic communications network

This paper presents two facility location models for the problem of determining how to optimally serve the requirements for communication circuits between the United States and various European and Middle Eastern countries. Given a projection of future requirements, the problem is to plan for the economic growth of a communications network to satisfy these requirements. Both satellite and submarine cable facilities may be used. The objective is to find an optimal placement of cables (type, location, and timing) and the routing of individual circuits between demand points (over both satellites and cables) such that the total discounted cost over a T-period horizon is minimized. This problem is cast as a multiperiod, capacitated facility location problem. Two mathematical models differing in their provisions for network reliability are presented. Solution approaches are outlined and compared by means of computational experience. Use of the models both in planning the growth of the network and in the economic evaluation of different cable technologies is also discussed.     

Stability of a microwave heated fluid Layer

When a time harmonic electromagnetic wave impinges on a slaba certain portion of the wave creates heat within the slab throughdipolar and ohmic heating. The electrical and thermal propertiesof the material dictate the dynamical nature of the heatingprocess, as well as the steady-state temperature profile. Thematerial considered here is a slab of fluid. We consider thecase where the fluid is bounded by thin rigid layers of transparentmaterial. The steady-state heating profile governs the typesof convective motions that can occur and also affects the stabilitycharacteristics of temperature, pressure and velocity perturbationsintroduced in the slab. The main objective here is to examinesuch stability characteristics, initially in the linear regime.Both rigid-rigid and rigid-free configurations are considered.