盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

测量慢弛豫介质的非线性折射率Z扫描方法

对非线性折射率慢弛豫介质的Z扫描理论进行了详细推导,得到了透射光场的表达式.分析表明:对于慢弛豫介质,其Z扫描过程也是非线性折射的累积过程.实验结果与理论分析一致. 关键词：     

Single-molecule single crystals

Various approaches to the preparation and verification of single-molecule single crystals are discussed for polyethylene and poly (oxyethylene). Analytic tools are electron microscopy, electron diffraction, and differential scanning calorimetry. The main difficulty in producing a single-molecule single crystal is to keep crystals from joining during growth.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

聚丙烯酰胺/醋酸铬与聚丙烯酰胺/酚醛胶态分散凝胶的纳米颗粒自组织分形结构

采用原子力显微镜 ,分别对无机交联体系聚丙烯酰胺 Cr3+ 和有机交联体系聚丙烯酰胺 酚醛胶态分散凝胶的微观结构进行了显微图像分析 .发现无论是在有机还是无机交联体系中 ,也无论聚丙烯酰胺和交联剂浓度如何变化 ,在微米尺度上最终形成的都是具有自相似性的树枝状分形图像 ,在更小尺度上则发现单个小树杈分形体都是由纳米级的颗粒紧密堆积而成 .在所研究的胶态分散凝胶体系中 ,树枝状分形结构的形成及其具体的形态取决于聚丙烯酰胺的浓度 ,而交联剂的有无及其多少只对树枝状凝胶分形的几何形态产生一定影响 .实验结果还表明纳米级 (≤ 10 0nm)的胶体颗粒构成的分形结构的凝胶其弹性模量G′比微米级的高出一个数量级 .且粒子尺度越小 ,则凝胶的力学稳定性越强     

耐高温α-淀粉酶结合Ca2+的研究

测定了耐高温α-淀粉酶分子中含10个Ca2+,脱钙酶逐量补钙后的活力及稳定性研究表明:酶分子中前8个Ca2+参与酶的催化作用,后2个Ca2+抖对酶结构起稳定作用.脱钙酶加钙后室温下的荧光光谱和CD谱表明:酶的构象虽有变化,但不显著,说明酶的构象对ca2+的依赖性很小.脱钙酶结合不同数目的Ca2+,于90℃加热15 min后,测其荧光光谱,结果表明,结合10个Ca2+时,酶保持最大的稳定构象;CD谱表明脱钙酶加热时仍具有一定的螺旋结构.这再次说明,酶的构象对ca2+依赖性较低.     

Isomeric anthracene diimide polymers

N-type semiconducting polymers are attractive for organic electronics, but desirable electron-deficient units for synthesizing such polymers are still lacking. As a cousin of rylene diimides such as naphthalene diimide (NDI) and perylene diimide (PDI), anthracene diimide (ADI) is a promising candidate; its polymers, however, have not been achieved yet because of synthetic challenges for its polymerizable monomers. Herein, we present ingenious synthesis of two dibromide ADI monomers with dibromination at differently symmetrical positions of the ADI core, which are further employed to construct ADI polymers. More interestingly, the two obtained ADI polymers possess the same main-chain and alkyl-chain structures but different backbone conformations owing to varied linking positions between repeating units. This feature enables their different optoelectronic properties and film-state packing behavior. The ADI polymers offer first examples of conjugated polymer conformational isomers and are highly promising as a new class of n-type semiconductors for various organic electronics applications.

Two anthracene diimide (ADI) polymers with the backbone conformational isomerism, new members of aromatic diimide polymers family, have been synthesized as a class of highly promising n-type semiconductors for organic electronics.     

共沉淀浸渍法制备由合成气直接合成二甲醚的Cu-Mn催化剂

采用共沉淀浸渍法,制备了直接合成二甲醚的Cu-Mn-Zn催化剂,通过对组成成分及其配比的研究,发现Cu含量一定的条件下,n(Zn)/n(Mn)摩尔比对催化剂性能有较大的影响,当n(Zn)/n(Mn)=1/3～1/2时,催化剂对CO的转化率和对二甲醚的选择性达到最佳,分别为53.6%和63.5%；如锰添加比例过大,对催化剂催化合成二甲醚有微弱抑制；添加锌比例过大,会大大降低CO的转化率。载体Y分子筛的含量对催化剂性能也有影响,用量过大将降低催化剂的活性和对二甲醚的选择性,当其含量为33%时,催化剂上CO转化率和选择性可分别达到66%和68%,且催化剂活性随分子筛含量减少不再有明显的变化。     

Enzymatic surface modification of Kevlar fibers

Horseradish peroxidase catalyzed grafting of acrylamide (AM) onto Kevlar fibers has been studied. The modified fiber has been characterized with scanning electron microscopy (SEM), elemental analysis and the grafting yield. From the SEM micrographs, the surface of the grafted Kevlar fiber is rougher than that of the untreated fiber, and the elemental analysis indicated that the nitrogen content of the treated fibers is higher than that of the untreated fiber. All the results suggested that AM must have been grafted onto the Kevlar surface through HRP-mediated radical initiated grafting reaction. The probably mechanism of HRP catalyzed grafting of AM onto Kevlar surface is proposed.     

大孔吸附树脂对邻甲酚的吸附行为研究

研究了大孔吸附树脂NDA—909吸附水溶液中邻甲酚的热力学特征，并与Amberlite XAD—4树脂进行了比较．通过吸附动力学实验，初步探讨了初始温度对吸附过程的影响。结果表明，NDA—909对邻甲酚的吸附符合Freundlich经验公式，表现为放热的物理吸附过程．此外吸附速率受颗粒内扩散和其它类型扩散的共同控制。