A Variational Finite Element Discretization of Compressible Flow

Foundations of Computational Mathematics - We present a finite element variational integrator for compressible flows. The numerical scheme is derived by discretizing, in a structure-preserving way,...     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Dibutyltin-3-hydroxyflavone titrates a dissociable component (cofactor) of mitochondrial ATP synthase: An energy-transfer component linked to the ubiquinone pool

Dibutyltin-3-hydroxyflavone, Bu₂Sn(of), is a new fluorescence probe inhibitor of F₁F₀-ATPase and oxidative phosphorylation which inhibits by titration of an unidentified component of F₀. Its site of action is closely related to that of the trialkyltins and of venturicidin. This F₀ component is part of a pool of this component which is present in the heart mitochondrial inner membrane at levels of 5–7 nmol (mg protein)^?1 [18 ± 3 Bu₂Sn(of) sites per mol F₁F₀-ATPase]. However, ATPase activity in submitochondrial particles is near maximally inhibited by titration of approx. three Bu₂Sn(of) sites per mol F₁F₀-ATPase. Over 60% (60–80%) of the Bu₂Sn(of) interaction sites can be lost during the purification of F₁F₀-ATPase from submitochondrial particles. The number of Bu₂Sn(of) interaction sites in various F₁F₀-ATPase preparations is variable. The high numbers of Bu₂Sn(of) sites per mol F₁F₀-ATPase for heart mitochondria (18–21) and submitochondrial particles (15–19.5) decline in ATP synthase (11–15) to the low values obtained in Complex V (7–10.5) and the minimal values observed in highly purified F₁F₀?ATPase (3.5–5.6), thus indicating a variable dissociable component or cofactor of ATP synthase. The Bu₂Sn(of) interaction site, a component of ATP synthase, is responsive to the redox status of the respiratory chain and the interaction with Bu₂Sn(of) is with the reduced form of this component. Fluorescence titration studies show that this component is in redox equilibrium with the ubiquinone pool of the respiratory chain. It is proposed that this redox component serves as an inhibitor titratable cofactor pool which cycles through an F₀ interaction site (or sites) via a system which serves as an energy-transfer link between the respiratory chain and ATP synthase.     

Modelling treatment effects in the HIV/AIDS epidemic

Advances in recent treatments for HIV/AIDS patients have shown dramatic outcomes in extending the incubation period and AIDS survival time, while also providing significant improvements in the quality of patients' lives. A compartmental model is proposed to analyse the effects of the various treatment regimens which have been introduced. The results produced are in good agreement with routinely collected data relating to levels of HIV/AIDS incidence and prevalence in the UK homosexual population. Some parameter values within the model are obtained from surveys, census results, etc, but others are derived using a maximum likelihood estimation procedure. Finally, the model is used to project levels of incidence and prevalence over the next few years, and to investigate several possible scenarios.     

Analysis of oxosteroids by nano-electrospray mass spectrometry of their oximes

A method for the analysis of neutral oxosteroids by electrospray mass spectrometry is described. The oxosteroids are converted into their oximes by treatment with hydroxyammonium chloride in aqueous methanol. Intense peaks corresponding to protonated oxime molecules are observed in nano-electrospray mass spectra. The detection limits for the oximes of progesterone, pregnenolone and dehydroepiandrosterone were 2.5, 5 and 25 pg/microL, respectively, approximately 20 times lower than for the underivatised steroids. The signal intensities were proportional to the concentration of the steroids in the range of 500 to 2.5 pg/microL. Fragmentation by collision-induced dissociation (CID) was studied using oximes of 28 model steroids carrying an oxo group at C-3, C-17 or C-20. Some of the steroid oximes were labelled with deuterium or (15)N. Fragment ions were observed which yielded useful structural information. Upon CID, protonated oximes of 3-oxo-Delta(4)-steroids produced abundant ions by cleavage through the B-ring and by loss of the side chain, while protonated oximes of saturated 3-oxosteroids did not give abundant ions by cleavage through the B-ring. Protonated oximes of 20-oxosteroids unsubstituted at C-21, C-17 or C-16 produced a characteristic ion at m/z 86 containing the side chain, C-16 and C-17. Protonated oximes of steroids containing only a 17-oxo group gave fewer ions of diagnostic value. Coupled with the selective isolation of steroid oximes from a biological matrix this method of derivatisation and CID may be used for the analysis of neutral oxosteroids in biological samples.     

Adhesion between graphite and modified polyester surfaces: a theoretical study

This study examines the adhesion of graphite to functionalized polyester surfaces using a range of qualitative and quantitative measures of theoretical adhesion. Modifications to the polyester surfaces include the addition of hydroxyl, carboxyl, or fluorine substituents with coverages of 0.4 and 0.9 groups per nm(2). In each case, the introduction of substituents to the surface of the polyester was calculated to lead to reduced adhesion to graphite. Effects of surface relaxation on adhesion are studied by employing different simulation protocols. The theoretical results suggest one mechanism to reduce adhesion to carbonaceous solids is to increase atomic roughness using strongly hydrophilic or alternatively strongly hydrophobic substituents.     

Kinetic modeling of the adsorption rate of a gaseous adsorbate on a granular adsorbent by ultra-rapid-scanning Fourier transform infrared spectrometry

A novel method for determining the rates of adsorption of gaseous adsorbates on granular adsorbents in the millisecond time regime is described. Mixtures of the adsorbate and nitrogen are passed through a solenoid valve and 100 mg of the adsorbent for periods of (typically) 100 ms. The concentration of the adsorbate passing into a low-volume, long path length gas cell is measured with an ultra-rapid-scanning Fourier transform infrared spectrometer capable of gathering 200 mid-infrared spectra per second with 6-cm(-1) resolution. The pressure of the gas entering the cell is measured simultaneously with a capacitance manometer. A dynamic mathematical model was developed to analyze and describe the results in terms of a Langmuir isotherm. The success of this approach is demonstrated by the estimation of the rate of adsorption of vapor-phase acetaldehyde on aminopropylsilylated granular silica gel.