Feynman’s Proof of Maxwell Equations: in?the?Context?of Quantum Gravity

Many of us are familiar with Feynman’s “proof” of 1948, as revealed by Dyson, which demonstrates that Maxwell equations of electromagnetism are a consequence of Newton’s laws of motion of classical mechanics and the commutation relations of coordinate and momentum of quantum mechanics. It was Feynman’s purpose to explore the universality of dynamics of particles while making the fewest assumptions. We re-examine this formulation in the context of quantum gravity and show how Feynman’s derivation can be extended to include quantum gravity.     

Influence of γ-ray-induced effects on dielectric dispersion of CuO-doped calcium fluoroborophosphate glass system

γ-Ray-induced dielectric dispersion in CaF₂–B₂O₃–P₂O₅ glasses doped with different concentrations of CuO was investigated. The glass samples were exposed to γ-rays with dose varying within the range 0–10 kGy. The dielectric dispersion and spectroscopic properties were measured before and after γ-ray treatment. Additionally, thermoluminescence studies were performed on post-irradiated glass samples. The results of dielectric properties and dielectric breakdown strength indicated a substantial increase in the insulating strength of CuO containing glasses due to γ-ray irradiation. The analysis of these results together with UV-vis optical absorption, IR spectra, and thermoluminescence studies have indicated a gradual increase in the concentration of mono-valent copper ions due to γ-ray treatment of the glass network. The additional studies have confirmed that these Cu⁺ ions occupy network-forming positions, increase the polymerization of the borophosphate glass network, and facilitates for the increase of insulating strength of the titled glass.     

Combustion wave propagation in mixtures of JSC-1A lunar regolith simulant with magnesium

Combustion of lunar regolith mixed with energetic additives is a potential method for production of construction materials in future moon missions. Recently, self-sustained combustion in the mixtures of JSC-1A lunar regolith and magnesium has been demonstrated. However, the concentration of magnesium in those mixtures was as high as 26 wt%. Note that magnesium must be either transported from Earth or recovered from lunar minerals or used structures. The present paper focuses on the minimization of magnesium content in JSC-1A/Mg mixtures. The mixtures were compacted into pellets and ignited in argon environment. Initial attempts to decrease magnesium concentration resulted in the observations of a spinning combustion wave at 23 wt% Mg. The observed spin combustion involved periodical motion of two counterpropagating hot spots along a helical path on the sample surface. These observations, including features such as formation of a faster hot spot after collision of the counterpropagating spots, confirm theoretical predictions for spin combustion in solid–solid mixtures. High-energy mechanical milling of JSC-1A in a planetary ball mill significantly increased its reactivity and improved combustion of its mixtures with magnesium. Mixtures of the obtained powder (the median diameter of about 3 μm) with 26 wt% Mg exhibit easy ignition and vigorous combustion. The minimum concentration of magnesium required for self-sustained propagation of a planar combustion front is as low as 13 wt%.     

Fluorescence monitoring of microchip capillary electrophoresis separation with monolithically integrated waveguides

Using femtosecond laser writing, optical waveguides were monolithically integrated into a commercial microfluidic lab-on-a-chip device, with the waveguides intersecting a microfluidic channel. Continuous-wave laser excitation through these optical waveguides confines the excitation window to a width of 12 microm, enabling high-resolution monitoring of the passage of different types of fluorescent analytes when migrating and being separated in the microfluidic channel by microchip capillary electrophoresis. Furthermore, we demonstrate on-chip-integrated waveguide excitation and detection of a biologically relevant species, fluorescently labeled DNA molecules, during microchip capillary electrophoresis. Well-controlled plug formation as required for on-chip integrated capillary electrophoresis separation of DNA molecules, and the combination of waveguide excitation and a low limit of detection, will enable monitoring of extremely small quantities with high spatial resolution.     

The suppression of structural phase transformation in LaVO3 and La1−xSrxVO3 thin films fabricated by pulsed laser deposition

Highly oriented (100) thin films of LaVO₃ and La_1−xSr_xVO₃ have been fabricated by pulsed laser deposition in a reducing atmosphere. The films show a transition from insulating to metallic behaviour in the composition region of x, 0.175<x<0.200. In the single crystals of the antiferromagnetic insulating phase, a first-order structural phase transition is observed few degrees below the magnetic transition, which manifests itself as a kink in the temperature dependence of resistivity. In the highly oriented thin films of LaVO₃ and La_1−xSr_xVO₃ fabricated on lattice matched substrates in this study, the structural phase transformation in the insulating phase has been suppressed. The electrical conduction is found to take place via hopping through localized states at low temperatures. The metallic compositions show a non-linear (T^1.5) behaviour in the temperature dependence of resistivity. V (2p) core level spectra of these films show a gradual change in the relative intensities of V³⁺ and V⁴⁺ ions as the value of x increases.     

Fiber-laser-based green-pumped continuous-wave singly-resonant optical parametric oscillator

Stable, high-power, second-harmonic-generation (SHG) of a compact CW Ytterbium (Yb) fiber laser at 1064 nm into the green and its use as a pump source for CW singly-resonant optical parametric oscillator (SRO) is demonstrated. Using a simple single-pass SHG configuration in MgO:sPPLT, as much as 9.6 W of single-frequency green radiation at 532 nm is generated from 30 W of fundamental power at a conversion efficiency of 32.7% in a Gaussian spatial profile with a beam quality factor of M ² < 1.3. Thermal effects have been investigated at different fundamental power levels and various thermal management schemes are employed to maximize the second-harmonic power. The green source is successfully deployed to pump a CW SRO tunable over 855–1408 nm, generating up to 2.1 W of idler at 1168 nm. The peak-to-peak idler power stability is better than 10.7% over 40 min, with beam quality factor M ² < 1.26 for the idler and M ² < 1.52 for the signal.     

Compton Spectrum Due to L-Shell Electrons

Compton spectrum due to L-shell electrons of thorium has been measured by the coincidence technique, using 279 keV incident gamma photons. The influence of L-shell electron momenta on the distribution of the scattered photons has been studied with reference to the Compton profile due to free electrons and compared with the exact and impulse hydrogenic theoretical models. Significant deviations are found between experimental and theoretical Compton spectra.     

Preferential Reactivity of Pyridylmagnesiumchloride with N,N-Dialkyl Arylamides over Carbonitriles: Synthesis of 2-(Aroyl) Pyridines

Reaction of 2-pyridylmagnesium chlorides with N,N-dialkyl arylamides afford exclusively 2-(aroyl) pyridines in high yields and purity without the formation of any tertiary alcohol. This method employs easily available raw materials and avoids the use of hazardous lithium reagents and cryogenic conditions. Further, preferential reactivity of this Grignard reagent with N,N-dialkyl arylamides over its carbonitrile counterparts offers a variety of 2-(aroyl) pyridines including the ones containing carbonitrile groups on the aryl ring.     

Liquid mixture excess properties by the hard sphere model

The excess properties of mixing were calculated for seven systems Ar-CH₄; Ar-N₂; Ar-O₂; Ar-CO; CO-CH₄; O₂-N₂; N₂-CO, using the Caranhan and Starling equation of state of rigid spheres and the Longuet-Higgins and Widom model. Two sets of calculations were done one using the experimentalG ^E to calculateS ^E ,H ^E andV ^E , and the other making use of Miller’s cross parameter values. The calculated values are compared with those of Snider and Herrington and Miller’s values and also with the experimental values. The agreement was found to be good.