相位校正器粘接局部应力控制技术

通过理论分析,对相位校正器的镜面与支撑结构间的粘接建立模型进行仿真研究,提出了在相位校正器镜片上加工小圆柱,使其粘接应力由镜片本身转移到突出部位的小柱子上,有效改善了相位校正器镜面局部粘接应力,使镜面局部高阶像差得到缓解,并通过试验验证了其有效性。     

基元阀在汽轮机进汽阀研究中的应用

阀碟型线对汽轮机进汽阀的性能影响很大，本文设计了三种形式的基元阀，通过数值模拟手段研究了阀碟型线对流场的影响；得出了不同阀碟形式的性能．     

等比差数列的通项公式及其应用——一道高中数列证明题的推广

现行高中课本数学第二册P.71有如下一道证明题:~~     

合作联盟资源集成计划一种新方法

合作联盟里，资源集成计划往往是联盟成员群体谈判博弈的结果。本以两人博弈为例，对联盟的资源集成计划给出一个谈判博弈模型，能够较好地模仿和反映合作联盟资源整合计划的制订过程。     

水平管外强化凝结传热的数值解

以Nusselt理论为基础,运用三维坐标建立了肋片侧面的冷凝传热模型,对肋片侧面的冷凝传热机理进行了分析,得出了肋片侧面表面传热系数的积分表达式。利用此法对水平环肋单管表面传热系数进行计算并将结果与传统解法进行比较。     

三硼酸锂晶体的生长形态

用自由生长系统研究了三硼酸锂ＬｉＢ_３Ｏ_５（ＬＢＯ）晶体的实际生长形态。实验表明，它的各晶面簇的重要性的顺序为：｛１１０｝＞｛０１１｝＞｛２０１｝＞｛１１１｝。讨论了ＬＢＯ晶体的生长习性与内部结构之间的关系并应用负离子配位多面体理论模型解释了ＬＢＯ晶体的生长形态。     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

新的光致变色有机化合物——环系俘精酸酐类

应用光致变色有机化合物作为光信息贮存的材料,虽经国际上的深入研究,但至今仍难满意地实现愿望。这主要由于已知的光致变色有机物对热不稳定以及存在着不可逆的副反应,从而影响其使用性能。如果光致变色作用与分子中键的均裂或异裂所产生的淤离基,离子或偶极中间体有关,则很难使有色体保持热稳定性或避免不可逆副反应。近年来H.G.海勒等在俘精酸酐类光致变色化合物的研究中有了新的进展。他们证明了这个体系的有色体1,8a-二氢萘衍生物是由相应的俘精酸酐按伍     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.