Rb（5PJ）＋Rb（5PJ）→Rb（5JS）＋Rb（nl=5D，7S）碰撞能量合并

研究了Rb(5PJ)+Rb(5PJ)→Rb(nlJ')+Rb(5S)碰撞能量合并过程,利用单模半导体激光器分别共振激发Rb原子的5P1/2或5P3/2态,利用另一与泵浦激光束反向平行的单模激光束作为吸收线探测激发态原子密度及其空间分布,吸收线分别调至5P1/2→5D3/2和5P3/2→7S1/2跃迁.由激发态原子密度和谱线荧光比得到碰撞能量合并过程的截面,对5P3/2激发,碰撞转移得到5D5/2,5D3/2和7S1/2的截面分别是(1.32士0.59)×10-14,(1.18士0.53)×10-14和(3.21士1.44)×10-15cm2;对5P1/2激发,碰撞转移到5D5/2和5D3/2的截面分别是(6.57士2.96)×10-15和(5.90士2.66)×10-15cm2.与其他的实验结果进行了比较.     

�۱�Ѹ�������������������ʵ���о�

An experimental study of heat transfer was carried out in the hyper-vapotron loop-??(HVL-??) test facility. Phenomena of subcooling were observed using the techniques of planar laser induced fluorescent (PLIF), high speed photography, particle image velocimetry, etc. The flow and condition parameters were as follows: (1) CuCrZr alloy material, (2) triangle and rectangle fin structures, (3) inlet subcooling temperature of 296K, (4) Rhodamine solution flow velocity of 0.3~0.5m•s⁻¹. It was found that the heat transfer coefficient (HTC) of rectangle fin is 1.3??1.5 times higher than the triangle fin under the same tested conditions. Furthermore, the heat transfer efficiency is extraordinary dependent on the maintain time of vortex forming between the fins.     

Cs蒸气中的碰撞能量合并和6P3/2和6P1/2间的激发转移

通过激发转移和碰撞能量合并研究了Cs(62P)精细结构混合.单模半导体激光器激发基态Cs原子至6P3/2态,直接荧光是由6P3/2态发射的,敏化荧光是由精细结构碰撞转移和碰撞能量合并产生的.由相对荧光强度得到了转移截面σ(6P3/2→6P1/2)=(1.5±0.5)×10-15cm2,与其它实验结果进行了比较.     

Cs-He光学碰撞中的非绝热跃迁

激光激发Cs He碰撞复合物,测量了Cs(62P)精细结构布居数分支比,由此证实了发生在光学碰撞中的非绝热跃迁.激光频率从Cs(6P3/2)红翼30cm-1调至蓝翼30cm-1,在6P3/2的近翼,分支比与矢谐量有很大的关系.同时测量了Cs(6PJ)态的精细结构转移截面,截面值σ21=9.8×10-19cm2.     

环境中铬形态分析研究进展

对近10年来国内外在环境中铬形态方面的分析研究进展作了综述,内容包括样品预处理、分离富集方法和样品检测方法(引述文献61篇).     

聚变堆高热流部件超汽化换热实验研究

搭建了常压水超汽化实验回路(HVL-Ⅰ),采用平面激光诱导荧光(PLIF)、高速摄影、微距摄影、粒子成像测速(PIV)等先进测量技术,开展聚变堆面对等离子体部件(第一壁、偏滤器)在高热流过冷沸腾工况下强化换热特性实验研究。选择三角形和矩形翅片的铬锆铜超汽化样件,实验工况为常压室温(296K),若丹明B 水溶液流速 0.3～0.5m•s⁻¹ 连续可调,热流密度～5MW•m⁻²。实验结果表明同等工况下,矩形翅片比三角形翅片换热效果显著增强,性能提升约30%～50%。微距摄影显示翅根涡流形态保持时间越短,越有利于小汽泡充分扩散,从而使换热得到强化。     

激发态Cs(5D)原子间碰撞能量转移

用激光二步激发Cs原子至8S态,从谱线的波长及强度可以确定Cs原子的辐射及碰撞过程,5D态主要是由8S→7P→5D跃迁布居的.在1016-1017Cs密度范围内,测量了碰撞能量合并5D 5D→nL 6S(nL=9D,11S,7F)速率系数,因5D→6P(3.0-3.6μm)处于红外本实验不能探测,利用一个已经测量过的过程(即6P 5D→6S 7D)作相对测量,对于9D,11S和7F态,其平均速率系数分别为(8.4±4.2)×10-10,(7.3±3.6)×10-10和(9.7±4.8)×10-10cm3s-1.讨论了碰撞转移过程11S 6S 7F 6S对速率系数的影响.     

Two Novel Isomers of HPS3 System

Two new isomers of HPS3 system, FIP(S)S2 and HSSPS, are predicted by means of B3LYP method with 6-311 G(3df,3pd) basis set. The two isomers can isomerize into thermodynamically the most stable species HSPS2, which have been experimentally identified,with relatively higher reaction barriers. In view of their higher thermodynamical and kinetic stability and the experimental observation for I-IP(O)O2 and HOOPO in previous study, we can reasonably believe that the two species can be spectrosymmetrically characterized in future experiments.     

Photoinitiated crosslinking of EPDM/inorganic filler blends and characterization of related properties

<正>Photoinitiated crosslinking of ethylene-propylene-diene terpolymer(EPDM) blends filled with calcium carbonate, talc and calcined kaolin(CK) in the presence of benzil dimethyl ketal as photoinitiator and trimethylolpropane triacrylate as crosslinker and their related properties have been studied by different analytical methods.The results from gel content and heat extension determination show that the efficiency of photocrosslinking of EPDM increases with increasing the content of diene and its molecular weight.The EPDM blends with 100 phr different inorganic fillers can be photocrosslinked to gel content of above 60%by 5 s UV-irradiation under optimum conditions.Under the same conditions of irradiation,the orders of photocrosslinking rate and final gel content are EPDM/CaCO_3EPDM/talcEPDM/CK.The data from thermogravimetric analysis,dynamic mechanical thermal analysis,electrical properties,mechanical tests and scanning electron microscopy show that UV irradiation crosslinking apparently enhances the thermal stability,mechanical properties and electrical properties of the photocrosslinked EPDM/inorganic filler samples.Although the attenuated total-reflection FTIR data show that inorganic fillers can promote the surface photo-oxidation of EPDM/inorganic filler samples with increasing the irradiation time,the above related properties of the photocrosslinked EPDM blends irradiated within 5 s are enough to satisfy many applications in the cable industry.     

高速逆流色谱分离弥勒獐牙菜中的总生物碱

弥勒獐牙菜又称青叶胆 (ＳｗｅｒｔｉａＭｉｌｅｅｎｓｉｓ) ,为龙胆科獐牙菜属植物 ,产地红河洲弥勒[1 ] 。该属植物资源丰富 ,药用价值较高[2 ] 。民间用于治疗急性病毒性肝炎、温热黄疸、食欲不振、尿路感染、带状疱疹等。龙胆宁碱 ( ｇｅｎｔｉａｎｉｎｅ)、次龙胆碱 ( ｇｅｎｔｉａｎａｄｉｎｅ)、龙胆黄碱 ( ｇｅｎｔｉｏｆａｖｉｎｅ)是獐牙菜中的有效成分 ,并具有抗炎、解毒、降压等作用。本文采用高速逆流色谱对弥勒獐牙菜中总生物碱进行分离[3] ,一次进样 2 0ｍｇ ,得到了 3种生物碱。1　实验部分1 1　仪器与试剂ＧＳＩＯＡＺ型…