The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

Optimizing the optical field distribution of solid immersion lens system by a continuous phase filter

In solid immersion lens (SIL) microscopy systems with high numerical aperture (NA), there always exists the aberration produced by Fresnel effects at the interface between SIL and the sample. This aberration may cause the degradation of the image of sample. We design a continuous phase filter and optimize the optical field distribution of SIL system. The numerical results show that when the continuous phase filter is used, the field distribution of SIL system can be optimized, and the focal depth and intensity of transmitted light can be increased. At the same time, the intensity of side-lobe and the resolution are kept almost unchanged.     

反光板(合作目标)反射率测量仪

本文介绍了反光板（合作目标）反射率测量仪的研制。仪器采用对称双光路比较测量法，给定两束相等光通量的光束，分别作为参考光束和测试光束，并用分束器实现原光路取样，从而解决了合作目标反光板入射光线与反射光线重合不能用常规测试方法来检测的难题。由于采用对称双光路的方法，入射光通量是相对恒定的，不受外界因素影响，从而使反射率测量仪达到精度高、重复性好和环境要求低的设计要求。     

氧极谱催化波法测定二苯胺

本文报道一种极谱测定二苯胺的新方法,它是基于二苯胺引起的氧极谱催化波.这个氧极谱催化波是由于二苯胺催化了电生超氧离子O_2~(-)的歧化反应产生的.本方法简单方便,有良好选择性.应用本方法测定了化工原料二苯胺的含量,结果令人满意.     

Electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) films

The electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFDMS-b-PDMS) films deposited on a glassy carbon electrode was investigated by means of cyclic voltammetry (CV). The influences of the solvent, film thickness, temperature, and PDMS block length in PFDMS-b-PDMS on the electrode process were discussed. It was found that in 0.1 M aqueous LiClO(4) the electrochemical processes of the films on a glassy carbon electrode were complex and have a low rate of electron transport and mass diffusion. The kinetic parameters obtained indicated that the electrode process was controlled by both the electrode reaction and mass diffusion.     

毛细管电泳法快速分离和检测肠毒性大肠杆菌

 建立了快速分离和检测引起仔猪腹泻的肠毒性大肠杆菌K88、K99和 987P细菌细胞的毛细管区带电泳方法 ,并进行了腹泻仔猪粪便中肠毒性大肠杆菌的应用检测分析。结果表明 ,在电泳缓冲液为 0 0 5mol/LNa2 CO3 NaHCO3(pH 9 9)、分离电压为 1 4 1kV、检测波长为 2 1 0nm的电泳条件下 ,E coliK88、K99和 987P的细胞分别具有单一、稳定的特征谱峰 ,其保留时间的相对标准偏差RSD≤ 0 9% ;在确定的实验条件下 ,实现了腹泻仔猪粪便中肠毒性大肠杆菌的快速检测分析 ,发现将出生 5d～ 6d的腹泻仔猪粪便引入培养基中增殖后主要检出K88。