排序方式: 共有15条查询结果,搜索用时 14 毫秒
1.
磁控溅射技术制备ZnO透光薄膜 总被引:1,自引:0,他引:1
采用RF磁控溅射方法,在玻璃衬底上制备了择优取向的ZnO薄膜;通过台阶仪、X射线衍射技术、原子力显微镜和分光光度计分别测量了不同溅射功率条件下淀积的ZnO薄膜厚度(淀积速率)、结晶质量、表面形貌与粗糙度、透光光谱,报道了该薄膜结晶质量、薄膜粗糙度与其在可见光区透光率的关系. 相似文献
2.
采用基于密度泛函理论的第一性原理赝势法对ZnO本征缺陷的几何结构、杂质形成能和电子结构进行了比较系统的研究。研究表明,OZn、Oi和VZn以受主的形式存在;ZnO和Zni以施主的形式存在。其中,Zni的形成能最小,因此Zni的存在正是未掺杂ZnO是n型半导体的原因。计算结果与其它研究者 相似文献
3.
4.
5.
6.
First principles study on the structural, electronic and optical properties of diluted magnetic semiconductors Zn1-xCoxX (X=S, Se, Te) 下载免费PDF全文
The electronic and optical properties of zincblende ZnX(X=S, Se, Te) and ZnX:Co are studied from density functional theory (DFT) based first principles calculations. The local crystal structure changes around the Co atoms in the lattice are studied after Co atoms are doped. It is shown that the Co-doped materials have smaller lattice constant (about 0.6%-0.9%). This is mainly due to the shortened Co-X bond length. The (partial) density of states (DOS) is calculated and differences between the pure and doped materials are studied. Results show that for the Co-doped materials, the valence bands are moving upward due to the existence of Co 3d electron states while the conductance bands are moving downward due to the reduced lattice constants. This results in the narrowed band gap of the doped materials. The complex dielectric indices and the absorption coefficients are calculated to examine the influences of the Co atoms on the optical properties. Results show that for the Co-doped materials, the absorption peaks in the high wavelength region are not as sharp and distinct as the undoped materials, and the absorption ranges are extended to even higher wavelength region. 相似文献
7.
采用基于密度泛函理论的第一性原理赝势平面波方法,对闪锌矿结构CdS和CdS:M(M=Ti,Co)几何结构、电荷分布、能带结构和电子态密度等进行了系统研究.几何结构研究对晶格参量进行了优化计算,Co和Ti原子掺入CdS后晶格常数均减小,晶格发生局部畸变.电荷密度计算表明,对于掺Co体系,近邻的S原子电荷分布变化明显,即有更多电子转移到S原子,同时次近邻Cd原子周围的电子分布也受到影响;对于Ti体系,邻近S原子电荷分布变化不明显,次近邻Cd原子周围电荷也没有重新分布.能带结构和态密度分析表明,由于Co3d和Ti3d电子的引入,CdS:Co成为铁磁半导体,而CdS:Ti为简并半导体. 相似文献
8.
采用基于密度泛函理论的第一性原理,对Zn(1-x)CoxTe基态的能量、几何结构、电子结构和光学性质等进行了系统的研究.几何结构研究对晶格参量进行了优化计算,Co原子掺入ZnTe后晶格常量减小,晶格发生局部畸变;电子结构的研究表明,Co3d电子的引入导致带隙宽度变窄;计算了Zn(1-x)CoxTe的光学性质,给出了其吸收系数及介电函数的实部ε1、虚部ε2.掺Co导致吸收峰在长波区域减弱且进一步向长波方向扩展. 相似文献
9.
10.
采用等离子堆焊技术在气门用钢基体上制备了Stellite 1和Stellite F合金堆焊层,对堆焊层的金相组织、物相组成和硬度等进行了研究,在MMU-10G高温端面摩擦磨损试验机上考察了不同温度条件对2种堆焊层摩擦磨损性能的影响,并分析了堆焊层的磨损机理.结果表明:高温条件下,随着温度的上升,2种合金堆焊层的摩擦系数增大,磨损体积减小;温度为400℃时,Stellite 1和Stellite F合金堆焊层分别产生了大量的疲劳裂纹和宽大的犁沟,磨损较为剧烈;温度为500和600℃时,2种合金堆焊层磨损机制相似,主要磨损机制分别为疲劳剥落和磨粒磨损;氧化膜的快速形成以及上试样硬度的下降减小了磨损,磨痕中心区域变窄,磨痕边缘的磨屑不断堆积并被碾压产生了严重的黏着磨损,导致摩擦系数增加. 相似文献