Zn-Fe-SiO2复合镀层的制备工艺及其耐蚀性研究

在酸性硫酸盐体系中电沉积制备了Zn-Fe-SiO2复合镀层,并研究了工艺因素对镀层SiO2含量的影响.随着电流密度由4.8A/dm2增加到6A/dm2时,镀层中SiO2的含量由0.21%上升到0.47%,但是当电流密度继续增加到7.2A/dm2时,SiO2含量反而下降到了0.18%.当镀液中SiO2浓度由20g/L增加到60g/L时,镀层中SiO2含量由0.40%上升到0.51%.当镀液pH值由2增加到4时,镀层中SiO2含量由0.22%上升到1.17%.采用5%NaCl溶液浸泡试验考察了Zn镀层、Zn-Fe合金镀层与Zn-Fe-SiO2复合镀层的耐蚀性,并研究了镀层中SiO2含量对镀层耐蚀性的影响.结果表明,Zn-Fe-SiO2复合镀层无需钝化处理,其耐蚀性优于Zn镀层及Zn-Fe合金镀层,并且镀层的耐蚀性随着镀层中SiO2含量增大而提高.     

Stacking due to ionic transport number mismatch during sample sweeping on microchips

Sample stacking can occur in isoconductive buffer systems as a result of ion transport mismatches that cause changes in buffer conductivity during electrophoresis. Fluorescence imaging was used to examine this effect in the sweeping of hydrophobic dyes with sodium dodecyl sulfate (SDS) on microchips. Imaging revealed the occurrence of a stacking effect in a sodium borate buffer system in which the sample buffer and SDS-containing run buffer had the same initial conductivity. Injected sample plugs were first swept by SDS micelles and the swept band was then stacked at the trailing end of the sample zone. This effect is due to changes in conductivity at both the front and back interfaces of the injected sample plug and can be modeled by moving boundary equations. Maximum signal enhancements of 86-, 160- and 560-fold were obtained for Rhodamine 560, Rhodamine B and Rhodamine 6G, respectively, by the combination of sweeping and stacking within a 1 cm section of microchannel. Based on sample sweeping/stacking and manipulation of the electric field polarity, a method of trapping and concentrating analyte from multiple injections was also demonstrated.     

Kinetic studies of the urease-catalyzed hydrolysis of urea in a buffer-free system

The kinetics of urea hydrolysis catalyzed by urease, mainly in the absence of buffers by use of the self-buffer effect of the products, was investigated. The effect of pH, temperature, and concentration of enzyme, substrate, product, salt ions, and buffers on the kinetic behavior of urease was examined. A kinetic model of a modified Michaelis-Menten form, incorporating substrate and product inhibition, pH dependence, and temperature effect, was developed to describe the reaction rate. Experimental data indicated that urease in a buffer-free solution was less susceptible to the inhibition of substrate product. The Michaelis constant keeps almost constant with the variation of pH and temperature, and increases with the addition of buffers and salts. The data also suggested that the noncompetitive pattern of the product inhibition, which is not significantly affected by temperature, increases gently with increasing pH. A Monod form rate expression was proposed to analyze the pH effect on the maximum rate. The proposed kinetic model was also examined by the long-time experiments in which pH, substrate, and product concentration varied obviously during the reaction course.     

Complete 1H and 13C NMR assignments of two phytosterols from roots of Piper nigrum

Using modern NMR techniques, including DQF-COSY, NOESY, HETCOR and HMBC, the full assignments of all 1H and 13C chemical shifts were made for stigmastane-3,6-dione and stigmast-4-ene-3,6-dione, isolated from the roots of Piper nigrum (Piperaceae). Their stereochemistry was resolved by a combination of 2D NOESY data and analysis of coupling constants. The two compounds were isolated from the genus Piper for the first time.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

Synergistic effect of thermoplastic phenolic resin and multiwalled carbon nanotubes on the crystallization of polyoxymethylene

To reduce the crystallization rate of polyoxymethylene (POM) to meet the requirement of thick-walled and large-sized articles production, and maintain high crystallinity as well as obtain refined crystalline grains to ensure the strength and stiffness simultaneously, thermoplastic phenolic resin (PF) and multiwalled carbon nanotubes (MWCNTs) were used as crystal growth inhibitor and nucleating agent, respectively, and their effects on the crystallization of POM were studied in details. The results showed that PF is an effective inhibitor and MWCNTs exhibits excellent nucleation effect on POM. Based on the obtained results, their synergistic influences on the crystallization process of POM were investigated. It is found that the objective of decreasing the crystallization rate while maintaining high crystallinity and forming fine crystalline grains can be realized. The 97/3/1 wt% POM/PF/MWCNTs, compared with those of neat POM, The T _c shifts by 3.3°C to a lower temperature, the crystallization enthalpy increases by 16.1 J/g and the full width at half-maximum widens by 48.5%. The modulation effect of PF and MWCNTs on the crystallization is closely related to the PF content and dispersion, the distribution and dispersion of MWCNTs in the PF and POM phases.     

英国国家科研与创新署学科交叉研究资助机制及启示

Newly established in 2018, the UK Research and Innovation (UKRI) strengthens the strategic coordination of the UK research and innovation system by bringing together seven Research Councils, Research England, and Innovate UK. Through its nine organizations, UKRI funds multidisciplinary and interdisciplinary research in a number of priority areas. It also runs the Strategic Priorities Fund to support multidisciplinary and interdisciplinary research in strategic areas identified by government policies as well as the Global Challenges Research Fund to promote challenge-led interdisciplinary research needed by developing countries. The UKRI makes significant efforts to engage stakeholders in the development, design, and implementation of multidisciplinary and interdisciplinary programs. It has also developed a range of mechanisms to improve the evaluation of multidisciplinary and interdisciplinary projects. Chinese science and innovation funding agencies could draw upon the UKRI experience from four aspects to advance interdisciplinary research in China.     

Improved Hydrogen‐Storage Thermodynamics and Kinetics for an RbF‐Doped Mg(NH2)2–2 LiH System

The introduction of RbF into the Mg(NH₂)₂–2 LiH system significantly decreased its (de‐)hydrogenation temperatures and enhanced its hydrogen‐storage kinetics. The Mg(NH₂)₂–2 LiH–0.08 RbF composite exhibits the optimal hydrogen‐storage properties as it could reversibly store approximately 4.76 wt % hydrogen through a two‐stage reaction with the onset temperatures of 80 °C for dehydrogenation and 55 °C for hydrogenation. At 130 °C, approximately 70 % of hydrogen was rapidly released from the 0.08 RbF‐doped sample within 180 min, and the fully dehydrogenated sample could absorb approximately 4.8 wt % of hydrogen at 120 °C. Structural analyses revealed that RbF reacted readily with LiH to convert to RbH and LiF owing to the favorable thermodynamics during ball‐milling. The newly generated RbH participated in the following dehydrogenation reaction, consequently resulting in a decrease in the reaction enthalpy change and activation energy.