Micromachining of circular ring microstructure by femtosecond laser pulses

In this paper, integration of interference phenomenon into femtosecond laser micromachining was reported as the femtosecond laser pulses were reshaped spatially to perform ablation. The generation of circular interference pattern was demonstrated by overlapping infrared femtosecond laser pulses. The interference pattern was subsequently focused on a copper substrate to ablate microstructures of concentric circular rings. The present technique is expected to open up new applications in the areas of rapid fabrication of micro-Fresnel lenses, hybrid microlenses and lens arrays.     

Laser writing techniques for photomask fabrication using a femtosecond laser

Photomasks are the backbone of microfabrication industries. Currently they are fabricated by a lithographic process, which is very expensive and time consuming since it is a multi-step process. These issues can be addressed by fabricating photomasks by direct femtosecond laser writing, which is a single-step process and comparatively cheaper and faster than lithography. In this paper we discuss our investigations on the effect of two types of laser writing techniques, namely front- and rear-side laser writing, with regard to the feature size and the edge quality of a feature. It is proved conclusively that for the patterning of masks, front-side laser writing is a better technique than rear-side laser writing with regard to smaller feature size and better edge quality. Moreover the energy required for front-side laser writing is considerably lower than that for rear-side laser writing. Received: 22 May 2001 / Accepted: 14 September 2001 / Published online: 17 October 2001     

PIV studies of large scale structures in the near field of small aspect ratio elliptic Jets

The near flow field of small aspect ratio elliptic turbulent free jets (issuing from nozzle and orifice) was experimentally studied using a 2D PIV Two point velocity correla tions in these jets revealed the extent and orientation of the large scale structures in th e major and minor planes. The spatial filtering of the instantaneous velocity field using Gaussian convolution kernel shows that while a single large vortex ring circumscribing the jet seems to be present at the exit of nozzle, the orifice jet exhibited a number of smaller vortex ring pairs close to jet exit. The smaller length scale observed in the case of the orifice jet is rep resentative of the smaller azimuthal vor tex rings that generate axial vortex field as they are convected. This results in the axis-switching in th e case of orifice jet and may have a mechanism differ ent from the self induction process as observed in the case of contoured nozzle jet flow.     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

Solid-state diphotocyclization of iso- and terephthalaldehydes via dihalogen substitution

The supramolecular nonbonded C-H...X interactions between formyl hydrogens and ortho-halogen atoms (Br/Cl) have been exploited to achieve conformational control in the solid state of dimethyl-substituted iso- and terephthaladehydes (1-3) for unprecedented diphotocyclization. It is shown that the dihalogen substitution also contributes to the stability of the benzocyclobutenols relative to their precursor photoenols, so that the solid-state photolysis of dialdehydes 2b, 2c, and 3b leads to diphotocyclization to afford respectable yields of bis-benzocyclobutenols.     

Fabrication of planar gratings by direct ablation using an ultrashort pulse laser in a common optical path configuration

Planar gratings have wide applications and to date, many methods for the fabrication of gratings have been reported. Ultrashort pulse lasers have been used for the machining of gratings primarily because they allow direct ablation and the manufacturing of sub-wavelength structures. In this paper, we present a novel direct ablation technique for the fabrication of planar gratings which makes use of the interference of ultrashort pulses in a common optical path configuration. This technique of grating fabrication not only simplifies the optical setup, but also immunizes the system to extraneous and inherent vibrations, thus enabling the manufacturing of planar gratings of good edge acuity. We have successfully fabricated planar gratings on a copper substrate. Received: 6 November 2001 / Accepted: 4 March 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +65/77-904-674, E-mail: mvenkata@ntu.edu.sg     

Instantaneous phase shifting arrangement for microsurface profiling of flat surfaces

Phase shifting interferometry is a well-established technique for non-contact surface profile measurement. Though phase shifting technique has many advantages, it is marred by a few inaccuracies due to the vibration and mechanical movement of the phase shifter itself. Significant amount of work is reported to theoretically compensate these error sources. But for a few works, prominent achievements have not been reported in eliminating these error sources in phase shifting interferometry. In this paper, a novel optical layout, in combination with instantaneous phase shifting interferometry is described. Experiments were carried out with this setup on a super mirror with a λ/20 surface roughness, to demonstrate the validity of the principle.     

Quantum Phase Properties of Photon Added and Subtracted Displaced Fock States

Quantum phase properties of photon added and subtracted displaced Fock states (and their limiting cases) are investigated from a number of perspectives, and it is shown that the quantum phase properties are dependent on the quantum state engineering operations performed. Specifically, the analytic expressions for quantum phase distributions and angular Q distribution as well as measures of quantum phase fluctuation and phase dispersion are obtained. The uniform phase distribution of the initial Fock states is observed to be transformed by the unitary operation (i.e., displacement operator) into non‐Gaussian shape, except for the initial vacuum state. It is observed that the phase distribution is symmetric with respect to the phase of the displacement parameter and becomes progressively narrower as its amplitude increases. The non‐unitary (photon addition/subtraction) operations make it even narrower in contrast to the Fock parameter, which leads to broadness. The photon subtraction is observed to be a more powerful quantum state engineering tool in comparison to the photon addition. Further, one of the quantum phase fluctuation parameters is found to reveal the existence of antibunching in both the engineered quantum states under consideration. Finally, the relevance of the engineered quantum states in the quantum phase estimation is also discussed.     

Gastroprotective Effects of Polyphenols against Various Gastro-Intestinal Disorders: A Mini-Review with Special Focus on Clinical Evidence

Polyphenols are classified as an organic chemical with phenolic units that display an array of biological functions. However, polyphenols have very low bioavailability and stability, which make polyphenols a less bioactive compound. Many researchers have indicated that several factors might affect the efficiency and the metabolism (biotransformation) of various polyphenols, which include the gut microbiota, structure, and physical properties as well as its interactions with other dietary nutrients (macromolecules). Hence, this mini-review covers the two-way interaction between polyphenols and gut microbiota (interplay) and how polyphenols are metabolized (biotransformation) to produce various polyphenolic metabolites. Moreover, the protective effects of numerous polyphenols and their metabolites against various gastrointestinal disorders/diseases including gastritis, gastric cancer, colorectal cancer, inflammatory bowel disease (IBD) like ulcerative colitis (UC), Crohn’s disease (CD), and irritable bowel syndrome (IBS) like celiac disease (CED) are discussed. For this review, the authors chose only a few popular polyphenols (green tea polyphenol, curcumin, resveratrol, quercetin), and a discussion of their proposed mechanism underpinning the gastroprotection was elaborated with a special focus on clinical evidence. Overall, this contribution would help the general population and science community to identify a potent polyphenol with strong antioxidant, anti-inflammatory, anti-cancer, prebiotic, and immunomodulatory properties to combat various gut-related diseases or disorders (complementary therapy) along with modified lifestyle pattern and standard gastroprotective drugs. However, the data from clinical trials are much limited and hence many large-scale clinical trials should be performed (with different form/metabolites and dose) to confirm the gastroprotective activity of the above-mentioned polyphenols and their metabolites before recommendation.