Photodegradation of polypropylene thermal bonded non-woven fabric

Samples of thermal bonded polypropylene non-woven fabrics were exposed to light from two TUV 30W G30T8 Philips lamps (λ = 253.7 nm) in a covered open-air chamber at room temperature (25 °C and 55% relative humidity) for different periods of time. In order to determine the state of degradation, the samples were examined by optical microscopy, scanning electron microscopy, staining with an isopropanol solution of methylene blue and Sudan III, colourimetry, Fourier transform infrared (FTIR) spectroscopy and density measurements. Although the bonded areas formed under complex thermal and mechanical deformations during the fabric production, no localized staining was observed. The colour of the irradiated and stained fabrics changed uniformly due to the even production of polar groups in the process of irradiation. It was found that the change of redness and blueness of degraded and stained samples can be correlated linearly with the evolution of POOH groups as determined by FTIR spectroscopy. Products containing carbonyl (CO), hydroxyl and/or hydroperoxide (POOH) groups increase with time of degradation with a non-linear relation. It was also observed that the density and 997 cm⁻¹/972 cm⁻¹ FTIR absorbance ratio increases with degradation time. Density fluctuation and the build up of degradation products caused fibre cracks and embrittlement.     

Decorations of graphene oxide with cisplatin toward investigation of fluorescence quencher on regulatory sequence of BRCA1 and BRCA2

Journal of the Iranian Chemical Society - Herein, we investigated the interaction of cisplatin loaded on GO (GO@CDDP) with two regulatory sequences, BRCA1 and BRCA2, synthesized from ssDNA based on...     

Conceptual linearization of Euler governing equations to solve high speed compressible flow using a pressure‐based method

The main objective of the current work is to introduce a new conceptual linearization strategy to improve the performance of a primitive shock‐capturing pressure‐based finite‐volume method. To avoid a spurious oscillatory solution in the chosen collocated grids, both the primitive and extended methods utilize two convecting and convected momentum expressions at each cell face. The expressions are obtained via a physical‐based discretization of two inclusive statements, which are constructed via a novel incorporation of the continuity and momentum governing equations. These two expressions in turn provide a strong coupling among the Euler conservative statements. Contrary to the primitive work, the linearization in the current work respects the definitions and essence of physics behind deriving the Euler governing equations. The accuracy and efficiency of the new formulation are then investigated by solving the shock tube as a problem with moving normal and expansion waves and the converging‐diverging nozzle as a problem with strong stationary normal shock. The results show that there is good improvement in performance of the primitive pressure‐based shock‐capturing method while its superior accuracy is not deteriorated at all. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2008     

Structural characterization and mechanical properties of electrospun silk fibroin nanofiber mats

The regenerated silk fibroin dissolved in formic acid was electrospun into nanofiber mats. Structural characteristics of the spun as received and methanol and ethanol treated fibers were examined using the Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction. Mechanical properties and air permeability of the electrospun mats were also studied. IR spectroscopy and X-ray diffractometry showed random coil conformation and amorphous structure for as-spun fibers while typical FTIR spectra and X-ray diffractograms of β-sheet crystalline structure were recorded for the methanol and ethanol treated fibers. The mechanical properties of the mats were found to be dependent on fiber diameter. The mats containing fibers with smaller diameter had higher tensile strength but lower breaking strain. Methanol and ethanol treatment enhanced tensile strengths of the mats at the expenses of their breaking strain. Air permeability and pore size of the mats are strongly associated with diameter of the electrospun fibers.     

Thermally stable and organosoluble binaphthylene‐based poly(urea‐ether‐imide)s: one‐pot preparation and characterization

A new family of wholly aromatic poly(urea‐ether‐imide)s ( 4a–4f ) possessing binaphthylene‐twisted rings was prepared by diphenyl azidophosphate (DPAP)‐activated one‐pot polyaddition reaction of a preformed imide heterocyclic ring‐containing dicarboxylic acid, 2,2′‐bis(4‐trimellitimidophenoxy)‐ 1,1′‐binaphthyl ( 1 ) with various kinds of aromatic diamines ( 3a–3f ). At first, with due attention to structural similarity and to compare the characterization data, a model compound 2 was synthesized by the reaction of diimide‐dicarboxylic acid 1 with two mole equivalents of aniline. In this direct method, the polymers were prepared by polyaddition reactions of the in situ‐formed diisocyanate with the aromatic diamines. Molecular weights of the poly(urea‐ether‐imide)s obtained were evaluated viscometrically, and the inherent viscosities (η_inh) measured were in the range 0.10– 0.25 dl/g. All of the polymers were characterized by FT‐IR spectroscopic method and elemental analysis. All of the resulting polymers exhibited an excellent solubility in common polar solvents such as N‐methyl‐2‐pyrrolidone (NMP), dimethyl sulfoxide (DMSO), N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc). Crystallinity of the resulted polymers was evaluated by wide‐angle X‐ray diffraction (WXRD) method, and they exhibited nearly a non‐crystalline nature as evidenced by their diffractograms. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry (DSC) thermograms were in the range of 274–302°C. The temperatures at 10% weight loss (T_d10%) from their thermogravimetric analysis (TGA/DTG) curves were found to be in the range of 389–414°C in nitrogen atmosphere. Copyright © 2008 John Wiley & Sons, Ltd.     

Modification of poly(ethylene terephthalate) fibers,fabrics, and films by amination reactions—A review

Currently, many of our living facilities are dependent on poly(ethylene terephthalate) (PET). It is utilized in the production of textiles, beverage bottles, food packaging, implants, and so forth. Although PET has desirable properties, it has to be amended for certain applications that have been modified by different methods. For modifications, aminolysis is used by several investigators, and this report reviews critically the related literature. Amines can be applied to impart the desired properties and produce active sites to be used for further alterations by successive reactions. Amine treatments alone enhance wettability, increase dyeability, and most applicable, produce functionality on the surface. By further reactions with several other chemicals, a spectrum of properties was endowed to PET products, such as flame retarding, anti-fouling property, highest hygroscopicity, silk-like character, biocompatibility, and so forth. There are a large number of works, mainly to change the surface properties, but the literature on the in vivo or common everyday evaluation of the amended products is scarce. Most of the modifications of PET products by amines are accompanied by a decrease in some other properties. Then the process of aminolysis and modifications have to be optimized with respect to several production parameters.     

A novel method for the separation of bis(alpha-hydroxyalkyl)phosphinic acid diastereoisomers via formation of novel cyclic phosphinic acids

The reaction of aromatic and aliphatic aldehydes with hypophosphorus acid under microwave irradiation was examined. The reaction gave a mixture of a racemic pair of bis(alpha-hydroxyalkyl)phosphinic acids and acetal derivatives from the corresponding bis(alpha-hydroxyalkyl)phosphinic acids of meso-stereochemistry in good yield. The difference in solubility in organic solvents due to polarity allowed us to readily separate these compounds. This method constitutes an easy, rapid, and good-yielding preparation and separation of bis(alpha-hydroxyalkyl) phosphinic acid diastereoisomers from simple starting materials using microwave irradiation.     

A novel method for the one-pot conversion of carboxylic acids to N,N-dimethylamides

A simple, efficient, and new method has been developed for the preparation of N,N-dimethylamides from carboxylic acids. As described below, treatment of a variety of aromatic carboxylic acids with N,N-dimethylsulfamoyl imidazole or N,N-dimethylsulfamoyl chloride in the presence of a mixture of methanesulfonic acid/phosphorus pentoxide (2:1, v/w) proceeded effectively to afford the corresponding N,N-dimethylamides in moderate to good yields. This method is easy, rapid, and good yielding for the synthesis of N,N-dimethylamides from carboxylic acids.