Extension of the self-consistent spectrophotometric basicity scale in acetonitrile to a full span of 28 pKa units: unification of different basicity scales

The earlier compiled self-consistent spectrophotometric basicity scale in acetonitrile (AN) was expanded to range from 3.8 to 32.0 pK(a) units, that is 28 orders of magnitude. Altogether 54 new relative basicity measurements (DeltapK(a) measurements) were carried out and 37 new compounds were introduced to the scale (it now includes altogether 89 bases). The relative basicity of any two bases in the scale can be obtained by combining at least two independent sets of measurements. Multiple overlapping measurements make the results more reliable. The overall consistency (as defined earlier) of the measurements is s = 0.03 pK(a) units. Thorough analysis of all of our experimental data (DeltapK(a) values of this and earlier works) and experimental pK(a) data in AN available in the literature (works from the groups of Coetzee and Padmanabhan, Kolthoff and Chantooni, Jr., the Schwesinger group, Bren' et al. and some others, altogether 19 papers) was carried out. On the basis of this analysis the anchor point of the scale-pyridine-was shifted upward by 0.20 pK(a) units thereby also revising the absolute pK(a) values of all the bases on the scale. This way very good agreement between our relative data and the absolute pK(a) values of the abovementioned authors was obtained. The revised basicity scale was interconnected with the earlier published self-consistent acidity scale by DeltapK(a) measurements between acids and bases. The rms deviation between the directly measured DeltapK(a) values and the absolute pK(a) values of the compounds was 0.10 pK(a) units.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

Can triple bonds exist between gold and main-group elements?

Pseudopotential ab initio calculations of several gold carbides, gold nitrides and their third-row analogues have been performed with the goal of finding species which contain triple bonds with gold. Multiple-bond character has been observed for Cl₂AuCH and Cl₂AuN. Bonding in these and related compounds is analysed and the reasons why gold prefers single bonds are outlined. Received: 8 September 1997 / Accepted: 11 December 1997     

Reaction field effects on the electronic structure of carbon radical and ionic centers

We examine solvent effects on carbon radical and ionic centers of HCXY by including a self-consistent reaction-field into the AM 1 and MNDO electronic structure models to mimic dielectric effects. We find that such concepts as merostability are principally solvent effects, and that, as expected, molecules with large dipoles or with charge assymmetry are stabilized more by solvent than those with atoms that are more electrically neutral. Of some importance in this study is the finding that conformation is also dependent on solvation and that change in geometry must be considered if an accurate estimate is to be made of energy differences such as those examined in the calculations of merostabilization.     

Calculated tautomeric equilibria and X-ray structures of 2-substituted N-methoxy-9-methyl-9H-purin-6-amines

Density Functional Theory calculations of nine 2-substituted N-methoxy-9-methyl-9H-purin-6-amines in the amino and imino tautomeric forms, as well as the complexes of the same with dimethyl sulfoxide (DMSO), were performed using two functionals (BP86 and B3LYP) and two basis sets (SV(P) and def2-TZVP). Solid-state structures of two of the compounds were obtained from single-crystal X-ray diffraction techniques. It was found that the inclusion of both an explicit hydrogen-bonding partner (DMSO) as well as continuum solvation effects, and vibrational corrections to energy, were necessary for qualitative and reasonable quantitative agreement with observed tautomeric ratios. The solution-optimized geometries and X-ray structures were found to be in good agreement. NMR spectroscopy confirmed the dependence of the tautomeric ratios on hydrogen-bonding abilities, in addition to the dipole moment of the solvent in question. Natural Bond Orbital charges on the N-7 nitrogen, as well as the tautomeric ratios were used to explain the observed reactivities of the compounds toward N-7 alkylation.     

Experimental investigation of various turbulator inserts in gas-heated channels

This experimental research was focused on the investigation of the heat transfer augmentation by various turbulator inserts in gas-heated channels. The work was conducted directly in a convective part of a two fire-tube boiler. The flue ducts were positioned vertically and horizontally for various design applications. Twisted-tape insert (with the twist ratio y=4.12), the straight-tape insert, and the combined turbulator insert (the internal twisted tape with the twist ratio of 180° y=2.16 and an external tape, which spirally winded on an internal tape, with longitudinal pitch H_360°=110 mm and the relative height of a tape (rib) e/D₀=0.098;0.2) were investigated. The working fluids were the combustion products of light oil fuel and wood pellets. In addition, the experiments were conducted in the two fire-tube boiler without any inserts. Despite of relatively large data scattering obtained in these experiments some qualitative and quantitative conclusions were drawn.     

Equilibrium acidities of superacids

In this paper, we report the most comprehensive equilibrium superacidity scale that is available to date. Contrary to most of the past works, this scale is set up in a medium of constant composition and the obtained acidity values characterize the acidities of molecules rather than acidities of media. The current scale is thus complementary to the well-known H(0) scale in the information that it provides. The solvent used is 1,2-dichloroethane (DCE). DCE has very weak basic properties (but sufficiently high polarity) and is an appropriate solvent for measuring acidities of very strong acids of diverse chemical nature. DCE acidities of well-known superacids (CF(3)SO(2)OH, (CF(3)SO(2))(2)NH, cyanocarbon acids, etc.) as well as common mineral acids (H(2)SO(4), HI, HBr, etc.) are reported. Acidities of altogether 62 acids have been determined from 176 interlinked relative acidity measurements. The scale spans 15 orders of magnitude (from picric acid to 1,1,2,3,3-pentacyanopropene) and is expected to be a useful tool in design, use, and further acidity measurements of superacidic molecules.     

Pentakis(trifluoromethyl)phenyl, a sterically crowded and electron-withdrawing group: synthesis and acidity of pentakis(trifluoromethyl)benzene, -toluene, -phenol, and -aniline

A general route to functionalized pentakis(trifluoromethyl)phenyl (C6(CF3)5) derivatives, promising building blocks for designing novel stable carbenes, radical species, superacids, weakly coordinating anions and other practically and theoretically useful species, is presented. This pertrifluoromethylation route proceeds via conveniently pregenerated (trifluoromethyl)copper (CF3Cu) species in DMF, stabilized by addition of 1,3-dimethyl-2-imidazolidinone (DMI). These species react with hexaiodobenzene at ambient temperature to give the potassium pentakis(trifluoromethyl)phenoxide along with hexakis(trifluoromethyl)benzene and pentakis(trifluoromethyl)benzene in a combined yield of 80%. A possible reaction pathway explaining the formation of pentakis(trifluoromethyl)phenoxide is proposed. Pentakis(trifluoromethyl)phenol gives rise to easily functionalized pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)aniline. Pertrifluoromethylation of pentaiodochlorobenzene and pentaiodotoluene allows straightforward access to pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)toluene, respectively. XRD structures of several C6(CF3)5 derivatives were determined and compared with the calculated structures. Due to the steric crowding the aromatic rings in all C6(CF3)5 derivatives are significantly distorted. The gas-phase acidities (Delta Gacid) and pKa values in different solvents (acetonitrile (AN), DMSO, water) for the title compounds and a number of related compounds have been measured. The origin of the acidifying effect of the C6(CF3)5 group has been explored using the isodesmic reactions approach.     

Experimental gas-phase basicity scale of superbasic phosphazenes

Seventeen superbasic phosphazenes and two Verkade's bases were used to supplement and extend the experimental gas-phase basicity scale in the superbasic region. For 19 strong bases the gas-phase basicity values (GB) were determined for the first time. Among them are such well-known bases as BEMP (1071.2 kJ/mol), Verkade's Me-substituted base (1083.8 kJ/mol), Et-N=P(NMe2)2-N=P(NMe2)3 (Et-P2 phosphazene, 1106.9 kJ/mol), and t-Bu-N=P(NMe2)3 (t-Bu-P1 phosphazene, 1058.0 kJ/mol). For the first time experimental GB values were determined for P2 phosphazenes. Together with our previous results self-consistent experimental gas-phase basicity scale between 1020 and 1107 kJ/mol is now established. This way an important region of the gas-phase basicity scale, which was earlier dominated by metal hydroxide bases, is now covered also with organic bases making it more accessible for further studies. The GB values for several superbases were calculated using density functional theory at the B3LYP/6-311+G** level. For the phosphazene family the standard deviation of the correlation between the experimental and theoretical values was 6.5 kJ/mol.     

Acid-base equilibria in nonpolar media. 4. Extension of the self-consistent basicity scale in THF medium. Gas-phase basicities of phosphazenes

Eleven new phenyl-substituted phosphazenes (P1-, P3-, and P4-bases) have been synthesized by the Staudinger or the Kirsanov reactions. The UV-vis spectrophotometric titration method was used to establish the relative basicity of them, and to extend the ion-pair basicity scale for THF medium. These measurements together with our previous work give a continuous basicity scale in THF ranging from 2.6 (2-MeO-pyridine) to 26.6 (2-Cl-C6H4P4(pyrr) phosphazene) in pKalpha units: that is for 24 orders of magnitude and containing 58 compounds (pyridines, anilines, amines, guanidines, amidines, phosphazenes). Ion-pair formation was taken into account by using the Fuoss equation. DeltapKip values of some phosphazene indicators estimated earlier by the 13C NMR method were revised. For some of the phosphazenes gas-phase basicities were measured.