Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Synthesis of large macrocyclic tetraaza compounds with a methylene backbone: Cyclo[-NH- (CH2)n-]4, (n = 6, 7, 8, 9 and 10). The formation of 28-, 32-, 36-, 40- and 44-membered rings

A series of macrocyclic tetraamines with 28-, 32-, 36-, 40- and 44-membered rings have been efficiently prepared from the corresponding ditosylamide and monobromoalcohol derivatives in 6 steps via a double condensation reaction. Overall yields were: 41, 41, 46, 29, and 33%, respectively, for 1,8,15,22-tetraazacyclooctacontane ( 11a ), 1,9,17,25-tetraazacyclodotriacontane ( 11b ), 1,10,19,28-tetraazacyclohexatriacontane ( 11c ), 1,11,21,31-tetraazacyclotetracontane ( 11d ) and 1,12,23,34-tetraazacyclotetratetracontane ( 11e ).     

Cross-linking chemistry and biology: development of multifunctional photoaffinity probes

An efficient method of photoaffinity labeling has been developed based on rationally designed multifunctional photoprobes. Photoaffinity techniques have been used to elucidate the protein structure at the interface of biomolecules by the photochemical labeling of interacting sites. However, the identification of labeled sites within target proteins is often difficult. Novel biotinyl bioprobes bearing a diazirine photophore have contributed significantly to the rapid elucidation of ligand binding sites within proteins, thereby extending conventional photoaffinity methods. This article discusses the synthesis and applications of various photoprobes bearing a biotin, including strategies using cleavable linkages between photophores. The combination of photoaffinity methods with chip technology is also described as a novel entry to rapid affinity-based screening of inhibitors. This review focuses on a rapid and reliable photoaffinity method utilizing diazirine-based multifunctional photoprobes with numerous potential applications in functional proteomics of biomolecular interactions.     

Photodegradation behavior of tert-butyl vinyl ketone polymers and copolymers with styrene and α-methylstyrene

Photodegradation behavior of atactic and isotactic polymers of tert-butyl vinyl ketone (t-BVK) and its copolymers with styrene and α-methylstyrene was studied in dioxane as a solvent at room temperature. The quantum yield of main-chain scission of atactic poly(t-BVK) was found to be larger than that of isotactic poly(t-BVK) and atactic poly(methyl vinyl ketone). From the Stern-Volmer plots on the quenching study of atactic poly(t-BVK) with naphthalene and 2,5-dimethyl-2,4-hexadiene, it was found that 60–70% of its photochemical reaction underwent main-chain scission from the triplet state. It was also found that the increase in t-BVK contents of both copolymers accelerated the photodegradation, and the copolymer with styrene was more photodegradable than that with α-methylstyrene. These results seemed to suggest that the main-chain scission of these vinyl ketone polymers and copolymers proceeded through a Norrish type II photoelimination mechanism.     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Effects of ortho-substituents on reactivities,tacticities, and ceiling temperatures of radical polymerizations of phenyl methacrylates

Radical polymerization and copolymerization of some o-alkylphenyl methacrylates were carried out and the effect of the ortho-substituents on the ability to homopolymerize, on the monomer reactivities, and on the ceiling temperatures of the monomers was studied. The effect of the substituent on tacticities and thermal stabilities of the polymers formed was also discussed. The ability to honiopolymerize and the monomer reactivity were considerably decreased by the introduction of the o-substituent. 2,6-Di-tert-butylphenyl methacrylate formed no methanol-insoluble polymer at 60°C. On the basis of the tacticity determined it was noted that the o-substituted phenyl methacrylates preferred syndiotactic addition in the propagation reaction less than did phenyl methacrylate or methyl methacrylate. The polymers formed from the o-substituted monomers were thermally less stable than poly(phenyl methacrylate), and, consistent with this finding, ceiling temperatures of the o-substituted phenyl methacrylates seemed to be lower than that of phenyl methacrylate. The effects observed were characteristic of the o-substituents conformationally close to the carbon-carbon double bond of the monomer or the carbon carrying the unpaired electron of the polymer radical.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

Monomer-isomerization polymerization. XX. Monomer-isomerization polymerization of 2-, 3-, and 4-octenes with Ziegler–Natta catalyst

A study of the monomer isomerization polymerization of 2-, 3-, and 4-octenes has been made with TiCl₃–(C₂H₅)₃Al catalyst at 80°C in comparison with the ordinary polymerization of 1-octene. It was found that all these octenes underwent monomer-isomerization polymerization to give high-molecular-weight homopolymer consisting exclusively of the 1-octene unit. The addition of an isomerization catalyst such as nickel acetylacetonate accelerated this polymerization. The rates of polymerization were found to decrease in the following order: 1-octene > 2-octene > 3-octene > 4-octene. These results indicate that the isomerization proceeded by a stepwise double-bond migration. It was also found that the monomer-isomerization copolymerization of 2-octene and 2-butene occurred under similar conditions and produced copolymers of both 1-olefin units.